{"title":"ESC","description":"\u003cspan data-mce-fragment=\"1\"\u003eElectronic speed controls of all types\u003c\/span\u003e","products":[{"product_id":"kiss-24amp-esc-race-edition-32bit","title":"KISS 24amp ESC Race Edition 32bit","description":"\u003cp\u003e\u003cstrong\u003eKISS ESC 24A Race Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eIn the sense  of our KISS ESC line this ESC offer a great compability to a wide range of motors, the work of years went in to making the best possible here.  \u003c\/span\u003e\u003cspan\u003eThe fast 32it Arm Cortex CPU does a very good job and runs the ESC very effective, of course reaction times are top notch.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe 24 RE is layed out as a beefy ESC which  withstand quite some abuse due to FPV races, several mechanisms doing its best to protect your valuable equipment, the rating of 24A wont need direct cooling, mounting them partially covered is ok.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNo need to worry with different firmwares, simply solder and fly (some solder skills are the only needed skills).  \u003c\/span\u003e\u003cspan\u003eFirst ESC with with oneshot42 support (dont worry, Oneshot125 and  normal PWM are auto detected too).  \u003c\/span\u003e\u003cspan\u003eBeside this, this is the first ESC who offer a easy to use telemetry function over the regular servo connector which you can use in combination with our KISS-FC, no external heavy parts needed anymore to have infos like voltage, ampere and even your RPM on your OSD (MinimOSD supported) or on your receiver LCD screen (Frsky-Taranis, f.e.).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e32-bit ARM Cortex MCU @ 48Mhz\u003c\/p\u003e\n\u003cp align=\"left\"\u003e- Telemetry capability (current, voltage and speed \/ RPM will be covered by the ESC itself and to compatible devices such as our KISS FC forwarded)\u003cbr\u003e\u003cbr\u003e- overcurrent protection (measures the current and limited active at 30A)\u003cbr\u003e\u003cbr\u003e- fast reacting overtemperature protection (reducing the gas when exceeding 120 ° C (reduces the power, not simply shutting down the unit)\u003cbr\u003e\u003cbr\u003e- Advanced Auto Timing (3.25 to 30 ° are at each engine step readjusted, unique to the 32bit Kiss ESC line)\u003cbr\u003e\u003cbr\u003e- For Race Multicopter Developed (24A continuous without direct cooling *)\u003cbr\u003e\u003cbr\u003e- High max. Speed ??(450.000ERpm, 64.000Rpm at a 14POL Motor)\u003cbr\u003e\u003cbr\u003e- small dimensions (19 x 27 mm)\u003cbr\u003e\u003cbr\u003e- Weight: 3,6gr\u003cbr\u003e\u003cbr\u003e- fine speed control (about 950 steps, \u003cu\u003ereal\u003c\/u\u003e resolution)\u003cbr\u003e\u003cbr\u003e- no external ElKo (electrolytic capacitor) necessary **\u003cbr\u003e\u003cbr\u003e- fast reacting gas changes\u003cbr\u003e\u003cbr\u003e- linear throttle response\u003cbr\u003e\u003cbr\u003e- Active freewheeling enabled (little diode losses resulting in higher efficiency) \u003cbr\u003e\u003cbr\u003e- regenerative braking, thereby rapid throttle response at deceleration (the ESC uses active freewheeling and regenerative braking, 2 independent features which relates to each other in different working states) \u003cbr\u003e\u003cbr\u003e- Fast switching FET by the use of gate drivers\u003cbr\u003e\u003cbr\u003e- minimal dead times by an adaptive dead time\u003cbr\u003e\u003cbr\u003e- 2-5S LiPo capable **\u003cbr\u003e\u003cbr\u003e- Oneshot42, Oneshot125 and normal (25-500Hz) PWM is detected automatically.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyduino.net\/ultraesc\/downloads\/Flyduino-KISS-ESC24A-Manual-v1.2-en.pdf\" target=\"_blank\" title=\"Download Manual\" rel=\"noopener noreferrer\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp align=\"left\"\u003e1x Kiss 24amp Race Edition 32bit Electronic Speed Controller\u003c\/p\u003e","brand":"Flyduino","offers":[{"title":"Default Title","offer_id":22682410118,"sku":null,"price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/KISS_amp_ESC_Race_Edition_bit_2.jpg?v=1658196794"},{"product_id":"sunrise-cicada-30amp-blheli_s-esc","title":"Sunrise Cicada 30amp BLHeli_S ESC BB2","description":"\u003cp\u003e\u003cstrong\u003eSunrise Cicada 30amp (2-4s) BLHeli_S ESC BB2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** New Version with faster BB2 MCU and solder pads for motor wires **\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBLHeli_S firmware is the next generation code, following the base BLHeli code.  \u003c\/span\u003e\u003cspan\u003eBLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.  All codes use damped light mode.  Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.  \u003c\/span\u003e\u003cspan\u003eThe code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eNew Firmware: BLHeli_S, new code based on BLHeli\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eMCUs: BusyBee2 (EFM8BB21F16) at 48MHz. BB2 is set to 500k eRPM(F39x around 360K)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eHardware PWM 36KHZ refresh, more smooth throttle response and silent operation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eDamped light\/synchronous rectification\/ active freewheeling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eSupports regular 1-2ms input signal, as well as Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detected when the ESC sees an input signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eSync loss protection feature, it will have the same good sync holding properties as base BLHeli.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eContinuous Current: 30A\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003ePeak Current (10s): 35A\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eBEC: no\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eLipo: 2s - 4s\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eProgramming: Yes\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eWeight: 6.5g\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eSize: 28x 13mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003e1x Sunrise Cicada 30amp ESC BB2\u003cbr\u003e3x Motor Wires\u003c\/span\u003e\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":22782025542,"sku":null,"price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Cicada_30amp_BLHeli_S_ESC_BB2_3.jpg?v=1658199218"},{"product_id":"sunrise-cicada-20amp-blheli_s-esc","title":"Sunrise Cicada 20amp BLHeli_S ESC","description":"\u003cp\u003e\u003cstrong\u003eSunrise Cicada 20amp (2-4s) BLHeli_S Electronic Speed Controller\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eBLHeli_S firmware is the next generation code, following the base BLHeli code.  \u003c\/span\u003e\u003cspan\u003eBLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.  All codes use damped light mode.  Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.  \u003c\/span\u003e\u003cspan\u003eThe code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNew Firmware: BLHeli_S, new code based on BLHeli\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMCUs: 8 bit, BusyBee1 (EFM8BB10F8) at 24MHz and BusyBee2 (EFM8BB21F16) at 48MHz. BB1 MCU can support up to 350k eRPM(Ref.F330 around 200K), BB2 is set to 500k eRPM(F39x around 360K)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHardware PWM 36KHZ refresh, more smooth throttle response and silent operation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDamped light\/synchronous rectification\/ active freewheeling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports regular 1-2ms input signal, as well as Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detected when the ESC sees an input signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSync loss protection feature, it will have the same good sync holding properties as base BLHeli.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eContinuous Current: 20A\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003ePeak Current (10s): 25A\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eBEC: no\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eLipo: 2s - 4s\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eProgramming: Yes\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eWeight: 7.9g\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003eSize: 27x 12mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1rem; letter-spacing: initial; line-height: 1.42857rem; text-transform: initial;\"\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1x Sunrise Cicada 20amp ESC\u003c\/span\u003e\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":22782253382,"sku":null,"price":11.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Cicada_20amp_BLHeli_S_ESC_8.jpg?v=1658201194"},{"product_id":"sunrise-usb-link","title":"Sunrise USB Link","description":"\u003cp\u003eUSB Link allows access to BLHeli ESCs to be programmed and the firmware updated.  Connect through the signal wire and you are able to customize settings, test motor output, and update the firmware.  This can all be done through the latest BLHeli Suite.  \u003c\/p\u003e\n\u003cp\u003eConnects to the computer USB port.  This USB Link works with most BLHeli and BLHeli_S compatible ESCs\u003c\/p\u003e\n\u003cp\u003eChoose option C ( Silabs BLHeli bootloader USB\/COM ) under \"Select ATMEL \/ SILABS Interface\" in BLHelisuite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eWeight: 5.1g\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDimensions: 49 * 18mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Sunrise USB Link\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":22896372230,"sku":"","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_USB_Link_8.jpg?v=1653424863"},{"product_id":"dys-xs30a-blheli_s-esc","title":"DYS XS30A BLHeli_S ESC","description":"\u003cstrong\u003eDYS XS30A BLHeli_S ESC\u003cbr\u003e\u003c\/strong\u003eBLHeli_S ESC with Hardware generated PWM synchronous to MCU yields ultra-quiet motor performance.\n\u003cp\u003e\u003cspan face=\"Verdana\" style=\"font-family: Verdana;\"\u003e Utilizes high-performance Busybee2 EFM8BB2 50MHz MCU.  \u003cspan\u003eThese are fantastic performing escs, essential to a high performance build.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003eWeight: 8.65g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Size(mm)L*W: \u003c\/span\u003e\u003cspan face=\"Verdana\" style=\"font-family: Verdana;\"\u003e45*16.5*5.8\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e BLHeli_S does Damped Light only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Firmware upgradable via signal wire (works with USB Linker for XM series)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Supports 1-2ms signal, Oneshot125, Oneshot42 and Multishot.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e High-current burst rating\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e High-Resolution Throttle steps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFeature: Silabs EFM8BB2 BusyBee2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e********ATTENTION****\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e**DYS XS30A is with A-H-70 firwmware, pls don't change the original firmware by yourself.**\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.5;\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.5;\"\u003e1x DYS XS30A ESC\u003cbr\u003e1x ESC Protective Case\u003c\/span\u003e\u003c\/p\u003e","brand":"DYS","offers":[{"title":"Default Title","offer_id":23998208774,"sku":null,"price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/DYS_XS30A_BLHeli_S_ESC_5.jpg?v=1658201663"},{"product_id":"dys-xs20a-blheli_s-esc","title":"DYS XS20A BLHeli_S ESC","description":"\u003cp\u003e\u003cstrong\u003eDYS XS20A BLHeli_S ESC\u003cbr\u003e\u003c\/strong\u003eBLHeli_S ESC with Hardware generated PWM synchronous to MCU yields ultra-quiet motor performance.  Utilizes high-performance EFM8BB2 50MHz MCU.  These are fantastic performing escs, essential to a high performance build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Weight: 4.49g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Size(mm)L*W*H: 24*14*4.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e BLHeli_S does Damped Light only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Firmware upgradable via signal wire (works with USB Linker for XM series)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e Supports 1-2ms signal, Oneshot125, Oneshot42 and Multishot.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e High-current burst rating\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Verdana; line-height: 1.4;\"\u003e High-Resolution Throttle steps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFeature: Silabs EFM8BB2 BusyBee2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e********ATTENTION****\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e**DYS XS20A is with A-H-70 firwmware, pls don't change the original firmware by yourself.**\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e1x DYS XS20A BLHeli_S ESC\u003cbr\u003e1x ESC Protective case\u003c\/p\u003e","brand":"DYS","offers":[{"title":"Default Title","offer_id":23998661062,"sku":null,"price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/DYS_XS20A_BLHeli_S_ESC_7.jpg?v=1658203337"},{"product_id":"sunrise-cicada-35amp-blheli_s-4-in-1-esc-bb2","title":"Sunrise Cicada 35Amp BLHeli_S 4-in-1 ESC BB2","description":"\u003cp\u003eThis is the new 4-in-1 BLHeli_S ESC from Sunrise which puts 4x 35amp speed controllers on one 35mm*35mm board.  Perfect for stacking with a flight controller.  No longer will ugly bulges mar the beautiful carbon of your quadcopters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBLHeli_S firmware is the next generation code, following the base BLHeli code.  \u003c\/span\u003e\u003cspan\u003eBLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.  All codes use damped light mode.  Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.  \u003c\/span\u003e\u003cspan\u003eThe code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMouting Hole:  30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eCurrent:  35A \u003c\/li\u003e\n\u003cli\u003ePeak Current(10s):  40A \u003c\/li\u003e\n\u003cli\u003eBEC:  NO \u003c\/li\u003e\n\u003cli\u003eLiPo:  2-4s \u003c\/li\u003e\n\u003cli\u003eWeight:  25g \u003c\/li\u003e\n\u003cli\u003eSize(PCB):  35*35mm\u003c\/li\u003e\n\u003cli\u003eMCU:  BusyBee2 (EFM8BB21F16) @ 48mhz\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports regular 1-2ms input signal, as well as Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Sunrise Cicada 35Amp BLHeli_S 4-in-1 ESC\u003cbr\u003e2x Wire Set\u003cbr\u003e1x Power Leads\u003cbr\u003e1x Pack of Nylon Spacers and Screws\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":29595280140,"sku":"","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Cicada_35Amp_BLHeli_S_4_in_1_ESC_BB2_5.jpg?v=1658199774"},{"product_id":"spedix-20a-2-4s-blheli_s-es20-esc","title":"Spedix 20A 2-4s BLHeli_S ES 20 ESC","description":"\u003cp\u003e\u003cstrong\u003eSpedix 20A 2-4s BLHeli_S ES 20 ESC \u003c\/strong\u003e\u003cbr\u003eSpedix is an OEM manufacturer who has recently come into the market, selling their own brand of rc gear.  Their entry in the BLHeli_S ESC market starts with this 20 amp 2-4s ES20 ESC.  It features one of the smallest sized 20 amp BLHeli_S escs you can buy.  Top performance, support for just about all protocols, including DShot 600 without needing any modifications, dedicated drive chip, BB2 MCU, 3 oz gold plated PCB and other top components round out this exciting product.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/ES20-Lite-04_large.jpg?v=1483255316\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize:  10.5x24x5 mm\u003c\/li\u003e\n\u003cli\u003eFirmware:  BLHeli_S\u003c\/li\u003e\n\u003cli\u003eWeight:  4.9g\u003c\/li\u003e\n\u003cli\u003eInput:  2-4 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eContinue Current:  20A\u003c\/li\u003e\n\u003cli\u003eMCU:  EFM8BB21\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix 20A 2-4s BLHeli_S ES 20 ESC \u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":32205603532,"sku":null,"price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_20A_2_4s_BLHeli_S_ES_20_ESC_0.jpg?v=1658199300"},{"product_id":"copy-of-spedix-30a-2-6s-blheli_s-es30-hv-esc","title":"Spedix 30A 2-6s BLHeli_S ES 30 HV ESC","description":"\u003cp\u003e\u003cstrong\u003eSpedix 30A 2-6s BLHeli_S ES 30 HV ESC\u003c\/strong\u003e\u003cbr\u003eSpedix is an OEM manufacturer who has recently come into the market, selling their own brand of rc gear.  Their second entry in the BLHeli_S ESC market, the high voltage 2-6s 30 amp ES 30 HV ESC features one of the smallest sized 30 amp BLHeli_S escs you can buy.  Top performance, support for just about all protocols, including DShot 600 without needing any modifications, dedicated drive chip, BB2 MCU, 3 oz gold plated PCB and other top components round out this exciting product.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/ES30-HV-4_large.jpg?v=1483255486\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: \u003cspan\u003e14.8x29x5 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFirmware:  BLHeli_S\u003c\/li\u003e\n\u003cli\u003eWeight:  7.9g\u003c\/li\u003e\n\u003cli\u003eInput:  2-6 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eContinue Current:  30A\u003c\/li\u003e\n\u003cli\u003eMCU:  EFM8BB21\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix 30A 2-6s BLHeli_S ES 30 HV ESC\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":32205616012,"sku":null,"price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_30A_2_6s_BLHeli_S_ES_30_HV_ESC_7.jpg?v=1658203289"},{"product_id":"spedix-is30-30amp-esc-blheli_s-dshot","title":"Spedix IS30 30Amp ESC BLHeli_S DSHOT","description":"\u003cp\u003e\u003cspan\u003eMainstream ESCs used in FPV racing quads are equipped with MOSFET of 3.3x3.3mm. MOSFETs of these dimensions are typically lower in efficiency and reliability. With the same overall dimensions, Spedix has carefully designed IS series of high performance ESCs that are furnished with 6 standard sized MOS-FETs in a larger size of 5x6mm, to meet the increasing demands in electric current of new motors used in FPV racing. The standard sized MOSFETs are manufactured of more matured technologies, larger heat dissipating areas, and lower resistance. Spedix ESCs made of these parts are improved in heat dissipation and therefore are more reliable than ESCs with smaller MOSFETs. Furthermore, other factors such as better design, fast EFM8BB21 MCU, independent half bridge drive chip, and 3 Oz copper PCB with high TG, all make IS ESCs one of the best in the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize:  23mm x 14mm x 5mm\u003c\/li\u003e\n\u003cli\u003eWeight:  7.5 grams\u003c\/li\u003e\n\u003cli\u003e30Amp\/40Amp Burst\u003c\/li\u003e\n\u003cli\u003e2-4S\u003c\/li\u003e\n\u003cli\u003eEFM8BB21 MCU\u003c\/li\u003e\n\u003cli\u003e3 oz copper PCB\u003c\/li\u003e\n\u003cli\u003e5x6mm MOSFETs\u003c\/li\u003e\n\u003cli\u003eLatest BLHeli_S firmware\u003c\/li\u003e\n\u003cli\u003eSupports \u003cspan\u003eOneshot125, Oneshot42, Multishot, DSHOT600\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix IS30 30Amp ESC BLHeli_S\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":37051117644,"sku":"","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_IS30_30Amp_ESC_BLHeli_S_DSHOT_6.jpg?v=1658201387"},{"product_id":"spedix-is30-30amp-4-in-1-esc-blheli_s-dshot","title":"Spedix IS30 30Amp 4-in-1 ESC BLHeli_S DSHOT","description":"\u003cp\u003e\u003cspan\u003eMainstream ESCs used in FPV racing quads are equipped with MOSFET of 3.3x3.3mm. MOSFETs of these dimensions are typically lower in efficiency and reliability. With the same overall dimensions, Spedix has carefully designed IS series of high performance ESCs that are furnished with 6 standard sized MOS-FETs in a larger size of 5x6mm, to meet the increasing demands in electric current of new motors used in FPV racing. The standard sized MOSFETs are manufactured of more matured technologies, larger heat dissipating areas, and lower resistance. Spedix ESCs made of these parts are improved in heat dissipation and therefore are more reliable than ESCs with smaller MOSFETs. Furthermore, other factors such as better design, fast EFM8BB21 MCU, independent half bridge drive chip, and 3 Oz copper PCB with high TG, all make IS ESCs one of the best in the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize:  36mm x 36mm x 5mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes:  30.5mm x 30.5mm\u003c\/li\u003e\n\u003cli\u003eWeight:  10.3 grams\u003c\/li\u003e\n\u003cli\u003e30Amp\/40Amp Burst\u003c\/li\u003e\n\u003cli\u003e2-4S\u003c\/li\u003e\n\u003cli\u003eEFM8BB21 MCU\u003c\/li\u003e\n\u003cli\u003e3 oz copper PCB\u003c\/li\u003e\n\u003cli\u003e5x6mm MOSFETs\u003c\/li\u003e\n\u003cli\u003eLatest BLHeli_S firmware\u003c\/li\u003e\n\u003cli\u003eSupports \u003cspan\u003eOneshot125, Oneshot42, Multishot, DSHOT600\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix IS30 30Amp 4-in-1 ESC\u003cbr\u003e1x Wire Set\u003cbr\u003e1x Electrolytic Capacitor\u003cbr\u003e1x Manual\u003c\/span\u003e\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":37051825356,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_IS30_30Amp_4_in_1_ESC_BLHeli_S_DSHOT_8.jpg?v=1658199829"},{"product_id":"sunrise-siskin-blheli_32-33amp-esc","title":"Sunrise Siskin BLHeli_32 33amp ESC","description":"\u003cp\u003eThe Siskin BLHeli_32 33amp ESC is the latest evolution in BLHeli ESCs. BLHeli_32 is the third generation of BLHeli code, following base BLHeli and BLHeli_S.\u003c\/p\u003e\n\u003cp\u003eRunning on ARM 32bit MCUs, the latest iteration of BLHeli can run input signals with lower latency at faster rates.  DShot up to at least DShot1200, and at rates up to at least 32kHz.\u003c\/p\u003e\n\u003cp\u003eThe 32bit MCU also allows additional functionality.\u003c\/p\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProgrammable pwm frequency, which allows motors to run more smoothly\u003c\/li\u003e\n\u003cli\u003eAuto Timing, which runs motors efficiently and protects against desync\u003c\/li\u003e\n\u003cli\u003eVariable Brake Force, allows control of braking force on fixed wing props\u003c\/li\u003e\n\u003cli\u003eImproved bidirectional mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn top of these features, new functions will be programmed in the future.  This includes \u003cspan\u003esetup from the FC by using Dshot commands, telemetry functionality (similar to KISS24amp ESCs) and current limiting. There is room to grow performance and functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Name: BL-ARM 33A\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMCU:  ARM 32-bit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 33A\u003c\/li\u003e\n\u003cli\u003ePeak Current(10s): 43A\u003c\/li\u003e\n\u003cli\u003eBEC: No\u003c\/li\u003e\n\u003cli\u003eLiPo: 2-5s\u003c\/li\u003e\n\u003cli\u003eProgramming card: YES\u003c\/li\u003e\n\u003cli\u003eWeight: 3.0 g\u003c\/li\u003e\n\u003cli\u003eSize(PCB): 29x16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Sunrise Siskin BLHeli_32 33amp ESC\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":41616320396,"sku":"","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Siskin_BLHeli_amp_ESC_2.jpg?v=1653425219"},{"product_id":"sunrise-siskin-blheli_32-21amp-esc","title":"Sunrise Siskin BLHeli_32 21amp ESC","description":"\u003cp\u003eThe Siskin BLHeli_32 21amp ESC is the latest evolution in BLHeli ESCs. BLHeli_32 is the third generation of BLHeli code, following base BLHeli and BLHeli_S.\u003c\/p\u003e\n\u003cp\u003eRunning on ARM 32bit MCUs, the latest iteration of BLHeli can run input signals with lower latency at faster rates.  DShot up to at least DShot1200, and at rates up to at least 32kHz.\u003c\/p\u003e\n\u003cp\u003eThe 32bit MCU also allows additional functionality.\u003c\/p\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProgrammable pwm frequency, which allows motors to run more smoothly\u003c\/li\u003e\n\u003cli\u003eAuto Timing, which runs motors efficiently and protects against desync\u003c\/li\u003e\n\u003cli\u003eVariable Brake Force, allows control of braking force on fixed wing props\u003c\/li\u003e\n\u003cli\u003eImproved bidirectional mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn top of these features, new functions will be programmed in the future.  This includes \u003cspan\u003esetup from the FC by using Dshot commands, telemetry functionality (similar to KISS24amp ESCs) and current limiting. There is room to grow performance and functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Name: BL-ARM 21A\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMCU:  ARM 32-bit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 21A\u003c\/li\u003e\n\u003cli\u003ePeak Current(10s): 26A\u003c\/li\u003e\n\u003cli\u003eBEC: No\u003c\/li\u003e\n\u003cli\u003eLiPo: 2-4s\u003c\/li\u003e\n\u003cli\u003eProgramming card: YES\u003c\/li\u003e\n\u003cli\u003eWeight: 2.0 g\u003c\/li\u003e\n\u003cli\u003eSize(PCB): 25x12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Sunrise Siskin BLHeli_32 21amp ESC\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":41616631692,"sku":"","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Siskin_BLHeli_amp_ESC_7.jpg?v=1653427547"},{"product_id":"spedix-gs-35-2-6s-35a-blheli_32-esc","title":"Spedix GS 35 2-6S 35A BLHeli_32 ESC","description":"\u003cp\u003eSpedix has released their latest BLHeli_32 ESC which features everything you would expect from one of the most well respected ESC manufacturers today.  The GS 35 features high voltage MOSFETs (40V), current protection, a telemetry port, DSHOT1200, and supports 2-6S lipos.  All the latest technologies you would want in an ESC.\u003c\/p\u003e\n\u003cdiv\u003eBased on Spedix's ES30HV design, the GS35 is one of the most reliable ESCs, while remaining a high-performance part.  \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSmallest 35A 32 bit 2-6S ESC in the market\u003c\/li\u003e\n\u003cli\u003eUses 40V MOSFET, compared with 30V brands - Gives more redundancy\u003c\/li\u003e\n\u003cli\u003eUses more capacitors, much more than competing brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirmware: BLHeli 32 bit\u003c\/li\u003e\n\u003cli\u003eInput: 2-6 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eCurrent: 35A Burst: 45A≥10S\u003c\/li\u003e\n\u003cli\u003eSize:28.5x16x5.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight:8.3 g(including cables)\u003c\/li\u003e\n\u003cli\u003eHigh voltage MOSFET(40V)\u003c\/li\u003e\n\u003cli\u003eTelemetry port and current protection supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix GS 35 2-6S 35A BLHeli_32 ESC\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":2345239216140,"sku":"","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_GS_35_2_6S_35A_BLHeli_32_ESC_1.jpg?v=1658203356"},{"product_id":"panasonic-fm-series-low-esr-capacitors","title":"Panasonic FM Series Low ESR Capacitors","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAdding capacitors to your electronics can make your FPV video signal cleaner and your multirotors fly better.  Low ESR capacitors can reduce video noise in your FPV feed, reduce noise that can corrupt motor, ESC and radio control signals, clean up noise going to your Gyro sensors - thus improving flight performance, and protect your electronic components from voltage spikes.  Highly recommended addition to any build.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer:  Panasonic\u003c\/li\u003e\n\u003cli\u003eProduct Category:  Aluminum Electrolytic Capacitors - Radial Leaded\u003c\/li\u003e\n\u003cli\u003eProduct:  Low Impedance Electrolytic Capacitors\u003c\/li\u003e\n\u003cli\u003eTermination Style:  Radial\u003c\/li\u003e\n\u003cli\u003eCapacitance:  330 uF, 1000 uF, 470 uF\u003c\/li\u003e\n\u003cli\u003eVoltage Rating DC:  35 VDC, 50VDC\u003c\/li\u003e\n\u003cli\u003eTolerance:  20 %\u003c\/li\u003e\n\u003cli\u003eMinimum Operating Temperature:  - 40 C\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Temperature:  + 105 C\u003c\/li\u003e\n\u003cli\u003eLead Style:  Straight\u003c\/li\u003e\n\u003cli\u003eLife:  4000 Hour\u003c\/li\u003e\n\u003cli\u003eSeries:  FM\u003c\/li\u003e\n\u003cli\u003eType:  Low Impedance Radial Leaded Aluminum Electrolytic Capacitor\u003c\/li\u003e\n\u003cli\u003eDissipation Factor DF:  0.12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-xs-4\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-xs-3 text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-xs-3 text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-xs-3 text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"div-table-row\"\u003e\n\u003cdiv class=\"row\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e330UF 35V - 8mm x 20mm 5mm lead spacing\u003c\/li\u003e\n\u003cli\u003e330UF 50V - 10mm x 25mm 5mm lead spacing\u003c\/li\u003e\n\u003cli\u003e1000UF 35V - 12mm x 25mm 5mm lead spacing\u003c\/li\u003e\n\u003cli\u003e1000UF 50V - 16mm x 25mm 7.5mm lead spacing\u003c\/li\u003e\n\u003cli\u003e470UF 35V - 10mm x 20mm 5mm lead spacing\u003c\/li\u003e\n\u003cli\u003e470UF 50V - 12mm x 20mm 5mm lead spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Panasonic FM Series Low ESR Capacitor\u003c\/p\u003e","brand":"Panasonic","offers":[{"title":"330UF 35V","offer_id":15323087962181,"sku":"","price":1.45,"currency_code":"USD","in_stock":false},{"title":"330UF 50V","offer_id":15323087994949,"sku":"","price":1.45,"currency_code":"USD","in_stock":true},{"title":"470UF 35V","offer_id":29414951419973,"sku":"","price":1.65,"currency_code":"USD","in_stock":false},{"title":"470UF 50V","offer_id":29414952108101,"sku":"","price":1.65,"currency_code":"USD","in_stock":false},{"title":"1000UF 35V","offer_id":15323088027717,"sku":"","price":1.99,"currency_code":"USD","in_stock":false},{"title":"1000UF 50V","offer_id":15323088060485,"sku":"","price":1.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Panasonic_FM_Series_Low_ESR_Capacitors_7.jpg?v=1653422984"},{"product_id":"spedix-gs40-40a-blheli_32-2-6s-4-in-1-esc","title":"Spedix GS40 40A BLHeli_32 2-6S 4-in-1 ESC","description":"\u003cp\u003eAs one of the most relied upon brands for electronic speed controllers around, Spedix has always been know for performance and reliability.  The all new Spedix GS40 40 amp 4-in-1 esc is designed to continue the tradition of price, performance, and reliability that put the company on the map.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo achieve that goal, Spedix used the lowest RDS standard size 40V 5x6mm MOSFET with only 0.85mOhm resistance. In contrast to the 30V MOSFET used by most competitors in the market, this 40V MOSFET improved the overall accuracy and response time to throttle signals. To meet the strict requirements in competitive racing, Spedix designed a 50V power supply circuit and also clean 5V output. To improve high current workload, Spedix uses high TG 6 layered PCB even though the cost is much higher. The included heatsink doesn't add to the size of the ESC and is only covering the parts that count, reducing weight compared to a full board heatsink.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn top of all these exceptional design decisions, the engineers managed to control the dimensions to be the same as a standard 36mm flight controller board.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003eInput:  2-6S LiPo\u003c\/li\u003e\n\u003cli\u003eCurrent:  40A continuous\u003c\/li\u003e\n\u003cli\u003eBurst Current:  45A (10 sec)\u003c\/li\u003e\n\u003cli\u003eBEC:  5v 2A\u003c\/li\u003e\n\u003cli\u003eCurrent sensor built in\u003c\/li\u003e\n\u003cli\u003eFirmware:  BLHeli_32\u003c\/li\u003e\n\u003cli\u003eSize:  38.5x43x6mm\u003c\/li\u003e\n\u003cli\u003eWeight:  14.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix GS40 40A 4-in-1 ESC\u003cbr\u003e5x Soft mount Grommets\u003cbr\u003e1x 35v 470uf Capacitor\u003cbr\u003e2x Cable\u003cbr\u003e1x Manual\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":17350925353029,"sku":"","price":57.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_GS40_40A_BLHeli_32_2_6S_4_in_1_ESC_7.jpg?v=1658199984"},{"product_id":"spedix-gs45-4-in-1-blheli_32-3-6s-45a-esc","title":"Spedix GS45 4-in-1 BLHeli_32 3-6S 45A ESC","description":"\u003cp\u003eThe latest flagship 4-in-1 electronic speed controller from Spedix features everything expected from the latest generation of ESCs, along with the company's well earned reputation for quality and value.  This BLHeli_32 ESC features a large cnc machined heatsink to draw away heat, reliable 40V MOSFETS for reliability and fast throttle response, and improved board layout for easier soldering and protection of sensitive parts.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBrand Name: Spedix\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eModel: GS45\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eItem Name: 45A BLheli_32 3-6S 4in1 Brushless ESC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput Voltage: 3-6S Lipo \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCon. CUrrent: 45A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eBurst Current: 55A (10S)\u003c\/li\u003e\n\u003cli\u003eBEC:10V\/2A\u003c\/li\u003e\n\u003cli\u003eCurrent Detection: Yes\u003c\/li\u003e\n\u003cli\u003eFirmware: BLHeli_32\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.5x42x6.5mm\u003c\/li\u003e\n\u003cli\u003eMount holes: 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eDiameter of Mount holes: 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 17g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x 45A 4in1 ESC\u003cbr\u003e1x XT60 Connector Cable \u003cbr\u003e2x Cable \u003cbr\u003e1x Capacitor \u003cbr\u003e5x Cable Tie\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":19551623970885,"sku":"","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_GS45_4_in_1_BLHeli_32_3_6S_45A_ESC_2.png?v=1658199597"},{"product_id":"spedix-ls40-slim-3-6s-40-amp-esc","title":"Spedix LS40 Slim 3-6S 40 Amp ESC","description":"\u003cp\u003eSpedix has released their latest top of the line individual ESC in a slim form factor.  This ESC has all the latest advances in ESC design. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with the latest STM32L4 chip (F4 Core) and BLHeli_32 firmware, LS40A has the fastest response speed compare to any other similar products in the market.\u003c\/li\u003e\n\u003cli\u003eIntergrated RGB LED support multiple color settings.\u003c\/li\u003e\n\u003cli\u003ePowered by full-size 40V MOSFET to ensure extreme reliability.\u003c\/li\u003e\n\u003cli\u003eUltra-slim design granted LS40A with the smallest size of similar products. With a max. width of only 9mm, LS40A fits narrower arms of modern racing drones and guarantees a clean build.\u003c\/li\u003e\n\u003cli\u003eCustomized aluminum heat sink effectively accelerates heat dissipation, slows down heat accumulation, and protects the electrical core components, which provides best performance among similar products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese features and more should make this an upgrade we all can agree on!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput:3-6 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 40A\u003c\/li\u003e\n\u003cli\u003eBurst Current: 50A≤10S\u003c\/li\u003e\n\u003cli\u003eIntegrated RGB LED\u003c\/li\u003e\n\u003cli\u003eBEC: No\u003c\/li\u003e\n\u003cli\u003eCurrent Detection: No\u003c\/li\u003e\n\u003cli\u003eFirmware: BLHeli_32\u003c\/li\u003e\n\u003cli\u003eDimensions: 9x38x6mm\u003c\/li\u003e\n\u003cli\u003eWeight：7.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix LS40 Slim 3-6S 40 Amp ESC\u003cbr\u003e1x Heat Shrink\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":29372928065605,"sku":"","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_LS40_Slim_3_6S_40_Amp_ESC_6.jpg?v=1658198956"},{"product_id":"spedix-is40-4-in-1-mini-3-6s-40a-esc","title":"Spedix IS40 4-In-1 Mini 3-6S 40A ESC","description":"\u003cp\u003eIS40 4IN1 MINI is an extremely reliable 20x20mm mount 6S 4IN1 ESC. Limited by the smaller size of 20x20mm ESC, engineers have always used 3mm mini MOSFETs, which are not reliable for 6S.\u003cbr\u003e\u003cbr\u003eThis compromise made these ESCs vulnerable to damage due to high heat and current\/voltage demands of the FPV market. With the innovative design of this 4-in-1 ESC, by separating the control board and the power board, Spedix successfully implemented full-size 5x6mm MOSFETs onto this 20x20mm speed controller.  They are able to present you with a high-performance mini 6S capable 20x20mm ESC of extreme reliability and responsiveness.\u003c\/p\u003e\n\u003cp\u003ePerfect as a combo with the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-li-20mm-x-20mm-flight-controller\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix LI\u003c\/a\u003e or any other 20x20 or full-sized flight controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInnovative double-deck design enables the implementation of full-size 5*6 MOSFET on 20*20mm mini 4IN1 ESC.\u003c\/li\u003e\n\u003cli\u003e40V MOSFET improves the overall reliability in fast response to throttle signals，making the 6 cell input capable in the real world.\u003c\/li\u003e\n\u003cli\u003eSilicone rings insulate standoffs, PCB, and parts.\u003c\/li\u003e\n\u003cli\u003eExtremely small size makes mounting on smaller frames easier than ever.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput:3-6 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 40A\u003c\/li\u003e\n\u003cli\u003eBurst Current: 50A≤10S\u003c\/li\u003e\n\u003cli\u003eBEC: No\u003c\/li\u003e\n\u003cli\u003eCurrent Detection: YES\u003c\/li\u003e\n\u003cli\u003eFirmware: BLHeli_S\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x31x8mm\u003c\/li\u003e\n\u003cli\u003eMount Holes: 20x20mm\u003c\/li\u003e\n\u003cli\u003eWeight：13.2g\u003c\/li\u003e\n\u003cli\u003eApplication: 200-300mm racing drone \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix IS40 4-In-1 Mini 3-6S 40A ESC\u003cbr\u003e4x Grommets\u003cbr\u003e4x Standoffs\u003cbr\u003e1x Wire set\u003cbr\u003e1x 470uF 35V Capacitor\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":29423006023749,"sku":"","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_IS40_4_In_1_Mini_3_6S_40A_ESC_5.jpg?v=1658203453"},{"product_id":"spedix-gs40f-4-in-1-mini-3-6s-40a-esc","title":"Spedix GS40F 4-In-1 Mini 3-6S 40A ESC","description":"\u003cp\u003e\u003cspan\u003eGS40F 4IN1 MINI \u003c\/span\u003e\u003cspan\u003eis an extremely reliable 20x20mm mount 6S 4IN1 ESC. Limited by the smaller size of 20x20mm ESC, engineers have always used 3mm mini MOSFETs, which are not reliable for 6S.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis compromise made these ESCs vulnerable to damage due to high heat and current\/voltage demands of the FPV market. With the innovative design of this 4-in-1 ESC, by separating the control board and the power board, Spedix successfully implemented full-size 5x6mm MOSFETs onto this 20x20mm speed controller.  They are able to present you with a high-performance mini 6S capable 20x20mm ESC of extreme reliability and responsiveness.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy combining reliable hardware with the fastest GD32F3 MCU in the market, Spedix is able to present a high-performance mini 20x20mm ESC of extreme reliability and responsiveness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePerfect as a combo with the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-li-20mm-x-20mm-flight-controller\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix LI\u003c\/a\u003e or any other 20x20 or full-sized flight controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInnovative double-deck design enables the implementation of full-size 5x6 MOSFET on 20x20mm mini 4IN1 ESC.\u003c\/li\u003e\n\u003cli\u003e40V MOSFET improves the overall reliability in fast response to throttle signals, making the 6 cell input capable in the real world\u003c\/li\u003e\n\u003cli\u003eGD32F3 MCU provides highest responsiveness in the market.\u003c\/li\u003e\n\u003cli\u003eExtremely small size makes mounting on smaller frames easier than ever.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput:3-6 Cell LiPo\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 40A\u003c\/li\u003e\n\u003cli\u003eBurst Current: 50A≤10S\u003c\/li\u003e\n\u003cli\u003eBEC: No\u003c\/li\u003e\n\u003cli\u003eCurrent Detection: YES\u003c\/li\u003e\n\u003cli\u003eFirmware: BLHeli_32\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x31x8mm\u003c\/li\u003e\n\u003cli\u003eMount Holes: 20x20mm\u003c\/li\u003e\n\u003cli\u003eWeight：13.2g\u003c\/li\u003e\n\u003cli\u003eApplication: 200-300mm racing drone \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Spedix GS40F 4-In-1 Mini 3-6S 40A ESC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Grommets\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Standoffs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Wire set\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 470uF 35V Capacitor\u003c\/span\u003e\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":29431898472517,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_GS40F_4_In_1_Mini_3_6S_40A_ESC_4.jpg?v=1658199498"},{"product_id":"holybro-kakute-f7-hdv-tekko-32-f3-4-in-1-40a-esc-stack","title":"Holybro Kakute F7 HDV and Tekko 32 F3 4-in-1 40A ESC Stack","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-kakute-f7-v1-5-and-tekko32-f3-4in1-45a-esc-stack\" target=\"_blank\" title=\"Holybro Kakute F7 HDV and Tekko32 F3 Stack\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - New Version Here **\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis stack works great for all manner of multi-rotor builds but is especially suited for those using the new DJI Digital FPV System.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/IMG_9560.jpg?v=1566876082\" alt=\"Holybro Kakute F7 HDV and DJI Digital FPV System\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20071KAKUTE-F7-HDVTekko32-F3-HDV-4in1-40A-ESC-COMBO_-P3.jpg?v=1566875164\" alt=\"Holybro Kakute F7 HDV + Tekko 32 F3 4-In-1 40A ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV\u003c\/strong\u003e\u003cbr\u003eHolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect HolyBro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/IMG_9339.jpg?v=1566875244\" alt=\"Holybro Kakute F7 HDV Flight Controller\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight, Butterflight, and Cleanflight.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTekko 32 F3 4-In-1 40AMP ESC\u003cbr\u003e\u003c\/strong\u003eAn all new BLHELI32 4-in-1 ESC with F3 MCU for smoother control and faster response rate. Supports up to 55A burst and 40A continuous.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/31023-TEKKO32-F3-4in1-40A-ESC-1.jpg?v=1566875277\" alt=\"Holybro Tekko 32 F3 4-In-1 40A ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO BEC\u003c\/li\u003e\n\u003cli\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eMounting holes 30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eF3 MCU, runs double faster than F051\u003c\/li\u003e\n\u003cli\u003eExtra Cap needed for high current or 6s usage\u003c\/li\u003e\n\u003cli\u003eDimensions: 44x37x6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePinout:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/47090d51c4.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/47090d51c4.jpg?v=1566875308\" alt=\"Holybro Tekko 32 F3 4-In-1 40A ESC Pinout\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes\u003c\/b\u003e:\u003cbr\u003e\u003cspan\u003e1x KAKUTE F7 HDV\u003cbr\u003e1x Tekko32F3 4in1 40A ESC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Electrolytic capacitor: 1000uF 35v\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_Manual.pdf\"\u003eHolybro Kakute F7 HDV Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":29462053519429,"sku":"","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_and_Tekko_32_F3_4_in_1_40A_ESC_Stack_4.jpg?v=1658198987"},{"product_id":"vivafpv-60a-blheli_32-4-in-1-dshot1200-3-6s-esc","title":"VivaFPV 45A BLHeli_32 4-In-1 DSHOT1200 3-6S ESC","description":"\u003cp\u003e\u003cspan\u003ePlug and play compatibility with many FC's, insane raw power, unbeatable price. Do you need more reasons? DShot1200, 45A, 3-6S!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage: 3-6S\u003c\/li\u003e\n\u003cli\u003eBurst current: 60A\u003c\/li\u003e\n\u003cli\u003eConstant current: 45A\u003c\/li\u003e\n\u003cli\u003eInput protocols: OneShot42, Multishot, DShot1200\u003c\/li\u003e\n\u003cli\u003eMounting holes: 30.5 x 30.5mm\u003c\/li\u003e\n\u003cli\u003eFirmware: BLHeli32 Suite (VIVAFPV_45A_BL32)\u003c\/li\u003e\n\u003cli\u003eConnector: JST SH 1.0mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16g\u003c\/li\u003e\n\u003cli\u003eBEC: 3A \/ 5V\u003c\/li\u003e\n\u003cli\u003ePlug and play with the VivaFPV FlightController \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x VivaFPV 4in1 45A ESC\u003cbr\u003e1x FC Connector Wire\u003cbr\u003e\u003cspan\u003eXT60 Power Cable x 1\u003cbr\u003e470uF 35V Low ESR Capacitor  x 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/vivafpv-esc-manual-4in1.pdf\"\u003eDownload User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"VivaFPV","offers":[{"title":"Default Title","offer_id":30253841711173,"sku":"","price":44.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/VivaFPV_45A_BLHeli_32_4_In_1_DSHOT1200_3_6S_ESC_0.jpg?v=1658199013"},{"product_id":"frsky-neuron-40-60-80-amp-blheli_32-esc","title":"FrSky Neuron 40\/60\/80 AMP BLHeli_32 ESC","description":"\u003cp\u003e\u003cspan\u003eThe FrSky Neuron Series ESC is a professional grade control unit, integrated with built-in telemetry like high-precision current sensor, voltage sensor, motor RPM, power consumption and ESC temperature sensor. Features optional DShot signaling and an adjustable SBEC voltage, that can be changed via LUA script. The Neuron ESC is encased in a CNC aluminum protective shell which also aids in heat dissipation. As with most FrSky products, the Neuron series is completely S.Port compatible, allowing you to use our full line of S.Port Telemetry sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Neuron-news-1-600x400.jpg?v=1569428063\" alt=\"FrSky Neuron ESC\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSmart Port enabled and telemetry data transmission supported\u003c\/li\u003e\n\u003cli\u003eTelemetry data for ESC: Voltage, Current, RPM, Power Consumption, Temperature.\u003c\/li\u003e\n\u003cli\u003eTelemetry data for SBEC: Output Voltage, Current.\u003c\/li\u003e\n\u003cli\u003eHigh-performance 32-bit micro-processor\u003c\/li\u003e\n\u003cli\u003eHigh-precision current sensor ACS781KLRTR-150U-T (Resolution 125mA, Precision ±2%) and ACS711KEXLT (Resolution 50mA, Precision ±2%)\u003c\/li\u003e\n\u003cli\u003eOver-temperature and over-current protection\u003c\/li\u003e\n\u003cli\u003eSBEC supports 7A@5~8.4V (adjusted through LUA or through FreeLink App with Airlink S )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 59*33*17mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 58g\u003c\/li\u003e\n\u003cli\u003eLiPo Cells: 3~6S\u003c\/li\u003e\n\u003cli\u003eAdjustable SBEC Voltage: 5~8.4V (Voltage Step: 0.1V)\u003c\/li\u003e\n\u003cli\u003eCont. Current: 40A\/60A\/80A\u003c\/li\u003e\n\u003cli\u003ePeak Current: 60A\/100A\/120A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FrSky Neuron 40\/60\/80 AMP BLHeli_32 ESC\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/neuron-80\/\" title=\"Download Neuron ESC Manual\"\u003eDownload Manual and Lua Scripts\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"FrSky","offers":[{"title":"40 Amp","offer_id":30261767340101,"sku":"","price":53.99,"currency_code":"USD","in_stock":false},{"title":"60 Amp","offer_id":30261767372869,"sku":"","price":57.99,"currency_code":"USD","in_stock":false},{"title":"80 Amp","offer_id":30261767405637,"sku":"","price":67.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/FrSky_Neuron_AMP_BLHeli_ESC_9.jpg?v=1653425231"},{"product_id":"holybro-tekko32-f3-4in1-40a-esc","title":"Holybro Tekko32 F3 4in1 40A ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-50a-blheli_32-4-in-1-esc\" title=\"Holybro Tekko32 50A ESC\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn all-new BLHELI_32 4-in-1 ESC with F3 MCU for smoother control and faster response rate. Supports up to 55A burst and 40A continuous.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e32bit ESC with BLHELI_32 firmware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports 3-6S lipo input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePWM input, TLM supported\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVoltage output (VBAT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNO BEC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting holes 30.5x30.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports damped light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eF3 MCU, runs double faster than F051\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtra Cap needed for high current or 6s usage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 44x37x6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 11.6g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Tekko32 F3 4in1 40A ESC\u003cbr\u003e1x Electrolytic capacitor: 1000uF 35v\u003cbr\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003cbr\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003cbr\u003e  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003ePinout MAP:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003cstrong\u003e              \u003c\/strong\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/shop.holybro.com\/u_file\/1908\/photo\/47090d51c4.jpg\"\u003e\u003c\/span\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":30270481793093,"sku":"","price":55.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_4in1_40A_ESC_0.jpg?v=1658199112"},{"product_id":"hobbywing-xrotor-micro-4-in-1-60amp-blheli_32-esc","title":"Hobbywing XRotor Micro 4-In-1 60Amp BLHeli_32 ESC","description":"\u003cp\u003e** Discontinued - \u003ca title=\"Hobbywing XRotor 65A AM32 4-In-1 ESC\" href=\"https:\/\/www.defiancerc.com\/products\/hobbywing-xrotor-g2-65a-am32-4-in-1-esc\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003eHobbywing is one of the most well-known and respected companies for electronic speed controllers. Their “bulletproof” XRotor ESCs provide all the features you would expect from a top-of-the-line product. \u003c\/p\u003e\n\u003cp\u003eHobbywing's XRotor 60A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 60A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.\u003c\/p\u003e\n\u003cp\u003eThe 60A Micro 4-in-1 ESC comes loaded with the latest 32bit tech, as well as BLHeli32 firmware, DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n' play ESC connector or solder pads for the flight controller.\u003c\/p\u003e\n\u003cp\u003eIf you know what's what in FPV, you'll want to get your hands on this ESC!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/z01YlwSY6K0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance.\u003c\/li\u003e\n\u003cli\u003eBLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.\u003c\/li\u003e\n\u003cli\u003eAll codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.\u003c\/li\u003e\n\u003cli\u003eThe code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.\u003c\/li\u003e\n\u003cli\u003eThe code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).\u003c\/li\u003e\n\u003cli\u003eDshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.\u003c\/li\u003e\n\u003cli\u003eThe code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.\u003c\/li\u003e\n\u003cli\u003eOnboard 10V \u0026amp;5V BEC, powering different accessories such as FC, VTX, Camera and LED lights and etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLiPo Power input: 3S-6S\u003c\/li\u003e\n\u003cli\u003eCont.Current: 60Ax4\u003c\/li\u003e\n\u003cli\u003eBurst Current: 80Ax4\u003c\/li\u003e\n\u003cli\u003eBEC Output: 5V@ 0.5A\u003c\/li\u003e\n\u003cli\u003eInput wires: 12AWG-130mm* (Red\/Black)\u003c\/li\u003e\n\u003cli\u003eOutput Wire: No wires but solder tabs\u003c\/li\u003e\n\u003cli\u003eMounting: 30.5mm x 30.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 15g\u003c\/li\u003e\n\u003cli\u003eDimensions:  52x42x6.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x \u003cspan\u003eHobbywing XRotor Micro 4-In-1 60Amp BLHeli_32 ESC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" title=\"Xrotor Micro 4-in-1 60a esc manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0109\/9702\/files\/User_Manual_Xrotor-fpv.pdf?v=1672431521\" target=\"_blank\"\u003e\u003cspan\u003eDownload Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":30486953689157,"sku":"","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Hobbywing-XRotor-Micro-4-In-1-60Amp-BLHeli-32-ESC-9.jpg?v=1692070196"},{"product_id":"holybro-kakute-f7-hdv-aio-tekko32-f3-35a-esc-combo","title":"Holybro Kakute F7 HDV AIO - Tekko32 F3 35A ESC Combo","description":"\u003cp\u003e\u003cspan\u003eHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIO to the DJI FPV VTx, for both signal and power supply. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Tekko32 F3 35A ESC uses an F3 MCU, with ws2812b LED and current sensor, supports BLHELI32 telemetry function.  Perfect combo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV AIO\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV AIO monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x37mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTekko32 F3 35A ESC:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size\/low weight\u003c\/li\u003e\n\u003cli\u003eBuilt-in Current sensor\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/li\u003e\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot\u003c\/li\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eOn-Board RGB LED (WS2812B LED)\u003c\/li\u003e\n\u003cli\u003eAuto Timing Feature\u003c\/li\u003e\n\u003cli\u003eSmooth Response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input:3-6s LIPO\u003c\/li\u003e\n\u003cli\u003eCont.Current：35A\u003c\/li\u003e\n\u003cli\u003eSize：15*30*5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6g (1pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 HDV AIO Flight Controller\u003cbr\u003e\u003cspan\u003e4x M3 Damping Balls\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003cbr\u003e\u003c\/span\u003e4x Holybro Tekko32 F3 35A ESCs\u003cbr\u003e4x ESC Wire Sets\u003cbr\u003e4x Electrolytic Capacitors 220uF 35V\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_AIO_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKakute F7 HDV AIO Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104056033349,"sku":"","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_AIO_Tekko32_F3_35A_ESC_Combo_4.jpg?v=1658200852"},{"product_id":"holybro-kakute-f7-hdv-aio-tekko32-f3-metal-65a-esc-combo","title":"Holybro Kakute F7 HDV AIO - Tekko32 F3 Metal 65A ESC Combo","description":"\u003cp\u003e\u003cspan\u003eHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIO to the DJI FPV VTx, for both signal and power supply. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNew BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. Supports up to 80A burst and 65A continuous. (ESC mounted under props, without anything covering the ESC)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV AIO\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV AIO monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x37mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"oaimY _1ntuX\"\u003e\u003cstrong\u003eTekko32 F3 Metal 65A ESC Combo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size\/low weight\u003c\/li\u003e\n\u003cli\u003eBuilt-in Current sensor\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/li\u003e\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot\u003c\/li\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eOn-Board RGB LED (WS2812B LED)\u003c\/li\u003e\n\u003cli\u003eAuto Timing Feature\u003c\/li\u003e\n\u003cli\u003eSmooth Response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz\u003c\/li\u003e\n\u003cli\u003eMosfet tested at 4S 65A, under props, nothing covered for 1min\u003c\/li\u003e\n\u003cli\u003e18 x 27 mm\u003c\/li\u003e\n\u003cli\u003eSupports Lipo 3-6S\u003c\/li\u003e\n\u003cli\u003eExt. cap needed for 6s (220uf 35v for 6s usage.)\u003c\/li\u003e\n\u003cli\u003eOnboard WS2812B LED\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4g (1pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 HDV AIO Flight Controller\u003cbr\u003e\u003cspan\u003e4x M3 Damping Balls\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003cbr\u003e\u003c\/span\u003e4x Holybro Tekko32 F3 Metal 65A ESCs\u003cbr\u003e4x ESC Wire Sets\u003cbr\u003e4x Electrolytic Capacitors 220uF 35V\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_AIO_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKakute F7 HDV AIO Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104077660229,"sku":"","price":131.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_AIO_Tekko32_F3_Metal_65A_ESC_Combo_9.jpg?v=1658200375"},{"product_id":"holybro-tekko32-f3-35a-esc-blheli_32-3-6s","title":"Holybro Tekko32 F3 35A ESC BLHeli_32 3-6S","description":"\u003cp\u003e\u003cspan\u003e** Discontinued - \u003c\/span\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/collections\/latest-products\/products\/holybro-tekko32-f4-45a-blheli_32-esc\" title=\"Holybro Tekko32 F4 45A ESC\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.defiancerc.com\/collections\/latest-products\/products\/holybro-tekko32-f4-45a-blheli_32-esc\"\u003eNew Version Here\u003c\/a\u003e\u003cspan\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBeefy Tekko32 F3 35A 3-6S BLHeli_32 ESCs from Holybro works perfect on any build requiring high performance and reliability.  Uses \u003cspan\u003eF3 MCU, with ws2812b LED and current sensor, supports BLHELI32 telemetry function.  Another great product from Holybro.  Perfect ESC to try Betaflight RPM Filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSmall size\/low weight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in Current sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports Oneshot \/ Multishot \/ Dshot\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e32bit ESC with BLHELI32 firmware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOn-Board RGB LED (WS2812B LED)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAuto Timing Feature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmooth Response\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePower input:3-6s LIPO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCont.Current：35A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize：15*30*5 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 3.6g (1pcs)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Tekko32 F3 35A ESC\u003cbr\u003e1x Electrolytic Capacitor 220uf 35V\u003cbr\u003e1x ESC Wire Set\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104087294021,"sku":"","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_35A_ESC_BLHeli_32_3_6S_9.jpg?v=1658201035"},{"product_id":"holybro-tekko32-f3-metal-65a-esc-blheli_32-3-6s","title":"Holybro Tekko32 F3 Metal 65A ESC BLHeli_32 3-6S","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f3-metal-65a-blheli_32-esc\" target=\"_blank\" title=\"Holybro Tekko32 F3 Metal 65A ESC\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - New Version Here **\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBeefy Tekko32 F3 Metal 65A 3-6S BLHeli_32 ESCs from Holybro works perfect on any build requiring high performance and reliability.  Uses F3 MCU, with ws2812b LED and current sensor, supports BLHELI32 telemetry function.  Another great product from Holybro.  Perfect ESC to try Betaflight RPM Filter.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNew BLHELI32 ESC with F3 MCU, provides smoother control and faster response speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupports up to 80A burst and 65A continuous. (ESC mounted under props, without anything covering the ESC)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eF3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMosfet tested at 4S 65A, under props, nothing covered for 1min\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e18 x 27 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports Lipo 3-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExt. cap needed for 6s (220uf 35v for 6s usage.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnboard WS2812B LED\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 4.4g (1pcs)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Holybro Tekko32 F3 Metal 65A ESC\u003cbr\u003e1x Electrolytic capacitor 220uF 35v\u003cbr\u003e\u003cspan\u003e1x ESC Wire Set\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104108036165,"sku":"","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_Metal_65A_ESC_BLHeli_32_3_6S_7.jpg?v=1658199468"},{"product_id":"holybro-tekko32-f3-4-in-1-metal-65a-esc","title":"Holybro Tekko32 F3 4-In-1 Metal 65A ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca title=\"Holybro Tekko32 F4 Metal 4-In-1 65A AM32 ESC\" href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-metal-4-in-1-65a-am32-esc\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll-new premium BLHeli_32 ESC from Holybro with F3 MCU, provides smoother control and faster response time. Built with metal case MOSFETs for better heat dissipation. Tested in short bursts up to 220A in total. The actual performance will only be limited by airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3(M4 Core) MCU, Runs BLHeli_32 firmware, the MCU works at 108Mhz\u003c\/li\u003e\n\u003cli\u003eThe 4-In-1 has an onboard analog current sensor, and TLM function (then no current reading over TLM)\u003c\/li\u003e\n\u003cli\u003eBuilt using metal case MOSFETs for better heat dissipation\u003c\/li\u003e\n\u003cli\u003eSupports Lipo 4-6S\u003c\/li\u003e\n\u003cli\u003eExt. cap needed for 6s (470uf 35v for 6s usage.)\u003c\/li\u003e\n\u003cli\u003eSize:42 x 42 mm\u003c\/li\u003e\n\u003cli\u003eMounting holes:30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNotice:\u003cbr\u003eAirflow is very important if you want to run this 4-In-1 in high current.\u003cbr\u003eThe input cable(from lipo to 4-In-1), should be at least 12AWG\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/daca71a4e4.png?v=1575832340\" alt=\"Holybro Tekko32 F3 4-In-1 Metal 65A ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eWarning:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePlease use non-metallic isolation standoffs (marked in red in the diagram above) for the mounting holes on the ESC, Because mounting holes and motor pad are connected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Tekko32 F3 Metal 65A 4in1 ESC\u003cbr\u003e1x Electrolytic capacito: 470uF 35v\u003cbr\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003cbr\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31113650077765,"sku":"","price":73.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_4_In_1_Metal_65A_ESC_6.jpg?v=1658200140"},{"product_id":"spedix-gs30-30a-blheli_32-esc","title":"Spedix GS30 30A BLHeli_32 ESC","description":"\u003cp\u003eSpedix is known for making amazing ESCs, and they've done it again with the GS 30a ESC. With the 32 bit protocol, this ESC can run DShot 1200. While a few other brands have made ESCs capable of this, Spedix is the first major brand to deliver it in a reliable package. It is lightweight, small, and affordable which makes it a great choice for your next ESC. If you love being on the cutting edge of drone racing technology, the GS30 32 Bit DShot 1200 ESC by Spedix is the ESC for you.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Spedix-30A-32-BITS-ESC-GS30_1800x1800_3ad1a30c-38bb-42a1-ac82-3e1db42fff5b.jpg?v=1577042534\" alt=\"Spedix GS30 30A BLHeli_32 ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware\u003c\/strong\u003e: Blheli_32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 2-4s Lipo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent\u003c\/strong\u003e: 30A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst\u003c\/strong\u003e: 40A upto 10 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 23x14x5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6g (including Cables)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Spedix GS30 30A BLHeli_32 ESC\u003c\/p\u003e","brand":"Spedix","offers":[{"title":"Default Title","offer_id":31130708967493,"sku":"","price":12.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Spedix_GS30_30A_BLHeli_32_ESC_8.jpg?v=1658203201"},{"product_id":"sunrise-siskin-blheli_32-36-amp-esc","title":"Sunrise Siskin BLHeli_32 36 Amp ESC","description":"\u003cp\u003eThe Siskin BLHeli_32 36 Amp ESC is the latest evolution in BLHeli ESCs. BLHeli_32 is the third generation of BLHeli code, following base BLHeli and BLHeli_S.\u003c\/p\u003e\n\u003cp\u003eRunning on ARM 32bit MCUs, the latest iteration of BLHeli can run input signals with lower latency at faster rates.  DShot up to at least DShot1200, and at rates up to at least 32kHz.\u003c\/p\u003e\n\u003cp\u003eThe 32bit MCU also allows additional functionality.\u003c\/p\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProgrammable pwm frequency, which allows motors to run more smoothly\u003c\/li\u003e\n\u003cli\u003eAuto Timing, which runs motors efficiently and protects against desync\u003c\/li\u003e\n\u003cli\u003eVariable Brake Force, allows control of braking force on fixed wing props\u003c\/li\u003e\n\u003cli\u003eImproved bidirectional mode (RPM FILTER)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBL-32 36A\u003c\/li\u003e\n\u003cli\u003eCon.Current:36A\u003c\/li\u003e\n\u003cli\u003ePeak Current(10s):41A\u003c\/li\u003e\n\u003cli\u003eLBEC:NO\u003c\/li\u003e\n\u003cli\u003eSBEC:NO\u003c\/li\u003e\n\u003cli\u003eLipo:2-6s\u003c\/li\u003e\n\u003cli\u003eProgramming :YES\u003c\/li\u003e\n\u003cli\u003eWeight:5g\u003c\/li\u003e\n\u003cli\u003eSize(PCB):33*18mm\u003c\/li\u003e\n\u003cli\u003eWith GD 32bit chip (MCU 72mhz)\u003c\/li\u003e\n\u003cli\u003eTelemetry\u003c\/li\u003e\n\u003cli\u003eRGB LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Sunrise Siskin BLHeli_32 36Amp ESC\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":31135056724037,"sku":"","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Sunrise_Siskin_BLHeli_Amp_ESC_0.jpg?v=1658195746"},{"product_id":"vgoodrc-firefly-blheli_32-4-in-1-mini-30a-esc","title":"VGoodRC Firefly BLHeli_32 4-In-1 Mini 30A ESC","description":"\u003cp\u003eSunrise\/VGoodRC has released a mini sized 2-6S 4-In-1 BLHeli_32 ESC.  The 20x20mm mounting pattern allows this ESC to fit in many space-starved frames, while still maintaining full-sized performance.  \u003c\/p\u003e\n\u003cdiv id=\"w_common_text-1537946750874\" class=\"reset_style\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eSingle-chip STM32F051 48MHZ ARM 32-bit microprocessor does not require external electrolytic capacitors, with a capacity of up to 470uF. Accurate speed control, high signal acquisition accuracy, fast response to throttle changes, excellent linearity, adaptive timing, compatibility with more motor models, automatic recognition of input signals. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe synchronous rectification technology improves the ESC's operating efficiency. Regenerative braking, active braking, and the motor's deceleration response are greatly improved.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"c_product_list-15379468480398042\" class=\"c_product_list-01001\" loaded=\"true\" min-height=\"200\"\u003e\n\u003cdiv class=\"e_box e_articles-001 p_ProductList\" data-ename=\"产品列表\"\u003e\n\u003cdiv class=\"e_box e_OccupyBox-001 p_OccupyBox\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"e_box e_box-000 p_CommonLanternBox\"\u003e\n\u003cdiv class=\"swiper-container lantern swiper-container-horizontal\"\u003e\n\u003cdiv class=\"swiper-wrapper\"\u003e\n\u003cdiv class=\"e_box e_box-000 p_products swiper-slide swiper-slide-duplicate-next\" data-ename=\"产品列表框架区\" data-swiper-slide-index=\"0\" isserverpaging=\"true\" paging-num=\"1\"\u003e\n\u003cdiv class=\"e_box e_ProductBox-001 p_Product\" data-dismoveable=\"\" data-foreachitem=\"\" dataid=\"45\"\u003e\n\u003cdiv class=\"e_box e_box-000 d_articles p_articles\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"e_box e_ProductBox-001 p_Product\" data-dismoveable=\"\" data-foreachitem=\"\" dataid=\"44\"\u003e\n\u003cdiv class=\"e_box e_box-000 p_images cut picture higher\" data-url=\"\/product\/44.html\" data-target=\"_parent\"\u003e\u003ca class=\"e_link e_link-000 p_linkB\" imghref=\"repository\/image\/v_LaLwHPRRSuPnrJzwOgkA.jpg\"\u003e\n\u003cdiv class=\"e_image e_image-000 p_image visible\"\u003e\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"e_box e_box-000 p_products swiper-slide swiper-slide-prev\" data-ename=\"产品列表框架区\" data-swiper-slide-index=\"1\" isserverpaging=\"true\" paging-num=\"2\"\u003e\n\u003cdiv class=\"e_box e_ProductBox-001 p_Product\" data-dismoveable=\"\" data-foreachitem=\"\" dataid=\"41\"\u003e\n\u003cdiv class=\"e_box e_box-000 d_articles p_articles\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"e_box e_ProductBox-001 p_Product\" data-dismoveable=\"\" data-foreachitem=\"\" dataid=\"40\"\u003e\n\u003cdiv class=\"e_box e_box-000 p_images cut picture higher\" data-url=\"\/product\/40.html\" data-target=\"_parent\"\u003e\u003ca class=\"e_link e_link-000 p_linkB\" imghref=\"repository\/image\/m3oN7XQOT4am8vHdG58YWA.jpg\"\u003e\n\u003cdiv class=\"e_image e_image-000 p_image visible\"\u003e\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"e_box e_box-000 p_products swiper-slide swiper-slide-active\" data-ename=\"产品列表框架区\" data-swiper-slide-index=\"2\" isserverpaging=\"true\" paging-num=\"3\"\u003e\n\u003cdiv class=\"e_box e_ProductBox-001 p_Product\" data-dismoveable=\"\" data-foreachitem=\"\" dataid=\"36\"\u003e\n\u003cdiv class=\"e_box e_box-000 d_articles p_articles\"\u003e\n\u003cdiv class=\"e_box e_box-000 d_HeadBox p_HeadBox_1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBL3230AMINI4IN1\u003c\/li\u003e\n\u003cli\u003eCon.Current:  30A (6S)\u003c\/li\u003e\n\u003cli\u003ePeak Current(10s):  40A\u003c\/li\u003e\n\u003cli\u003eLBEC:  NO\u003c\/li\u003e\n\u003cli\u003eSBEC:  5V\/2A\u003c\/li\u003e\n\u003cli\u003eLipo:  2-6s\u003c\/li\u003e\n\u003cli\u003eProgramming:  YES\u003c\/li\u003e\n\u003cli\u003eWeight:  12g\u003c\/li\u003e\n\u003cli\u003eSize(PCB):  27*27mm\u003c\/li\u003e\n\u003cli\u003eMounting Pattern:  20X20mm (M2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x VGoodRC Firefly BLHeli_32 Mini 4-In-1 30A ESC\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":31135062753349,"sku":"","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/VGoodRC_Firefly_BLHeli_32_4_In_1_Mini_30A_ESC_1.jpg?v=1658199899"},{"product_id":"vgoodrc-4-in-1-60a-3-8s-blheli_32-esc","title":"VGoodRC 4-In-1 60A 3-8S BLHeli_32 ESC","description":"\u003cp\u003eVgoodRC\/Sunrise's new 60A 4-In-1 3-8S BLHeli_32 ESC is a robust, full featured, 4-In-1 ESC that has all the features you want.  Built tough to withstand rough handling, able to sustain 60a and burst to 80a, and supports 3-8S input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBL32 60A8S4IN1\u003c\/li\u003e\n\u003cli\u003eCon.Current:  60A (6S)\u003c\/li\u003e\n\u003cli\u003ePeak Current(10s):  80A\u003c\/li\u003e\n\u003cli\u003eLBEC:  NO\u003c\/li\u003e\n\u003cli\u003eSBEC:  NO\u003c\/li\u003e\n\u003cli\u003eLipo:  3-8s\u003c\/li\u003e\n\u003cli\u003eProgramming:  YES\u003c\/li\u003e\n\u003cli\u003eWeight:  16.8g\u003c\/li\u003e\n\u003cli\u003eSize(PCB):  36*36mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x VGoodRC 4-In-1 60A 3-8S BLHeli_32 ESC\u003cbr\u003e1x 470uF 35V Capacitor\u003cbr\u003e2x Cables\u003cbr\u003e\u003c\/p\u003e","brand":"Sunrise","offers":[{"title":"Default Title","offer_id":31135077204037,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/VGoodRC_4_In_1_60A_3_8S_BLHeli_32_ESC_8.png?v=1658199119"},{"product_id":"zeez-design-racing-combo-f7-fc-60a-bl32-esc","title":"ZeeZ Design Racing Combo - F7 FC + 60A BL32 ESC","description":"\u003cp\u003e\u003cspan\u003eZeez Design Racing Combo with the ZeeZ F7 Flight Controller, ZeeZ 60A 4-in-1 BLHeli_32 ESC, and ZeeZ LED System.  An amazing stack featuring one of the best F7 flight controllers with a powerful 60Amp BLHeli_32 ESC and 4 RGB LED Strips with 10 LEDs per strip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFlight Controller:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUp to 8S input (max 36V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5V BEC up to 3A continuous\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSTM32F722 MCU\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e128MB OnBoard flash\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSD chip Onboard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 available UARTS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVTX switch to control the ON\/OFF of the VTX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003edirectly from your transmitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLC Filter for 5V VTX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB Type C connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnboard RGB LED distribution for clean wiring to the LED on the arm of the quad.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNotch design on sides and in the front of the – FC for better fitting on the frame.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eESC:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eInput: 3S-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-quality Toshiba Mosfet: 60A continuous current draw \/90A peak current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware: BlHeli32 ZEEZ60A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAluminum HeatSink to cooldown the Mosfet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncluding 35V 470uF Low ESR Capacitor (and spare capacitor)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy wiring with connector included in package with Zeez F7 Flight Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBidirectional DSHOT capable for RMP filtering\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension: 37,50mm * 43mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eLED System:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eZeez Led System includes 4 strips of RGB led light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10 RBG Led on each strip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMax Current Draw (10 led on white color): 0.6A @ 5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy wiring to Zeez F7 Flight controller and easy control with BetaFlight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez F7 Flight Controller\u003cbr\u003e1x Zeez 60A 4in1 ESC\u003cbr\u003e1x Zeez Led System (4 LED Strips)\u003cbr\u003e4x Aluminum Standoff\u003cbr\u003e4x Aluminum Nut\u003cbr\u003e2x ESC to Flight Controller 8 Pin JST SH 1.00mm connector\u003cbr\u003e6x Led Strip to Flight Controller 3 pin JST SH 1.00mm connector\u003cbr\u003e2x 470uF 35V Low ESR Capacitor\u003cbr\u003e1x XT60 with 12AWG Silicon Cable for battery connection\u003cbr\u003e2x 2.00mm Header Pin for VTX connection\u003cbr\u003e2x 2.54mm Header Pin for Receiver connection\u003cbr\u003e2x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/ZEEZ-F7-manual-v0.1.pdf\"\u003eUser Manual\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/betaflight_4.1.0_ZEEZF7.zip\"\u003eBetaFlight 4.1 Firmware\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/OSD_Logo2.png\"\u003eBetaflight OSD Custom Logo\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31171264872517,"sku":"","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_Racing_Combo_F7_FC_60A_BL32_ESC_8.jpg?v=1658201414"},{"product_id":"fettec-4-in-1-6s-35a-dshot-2400-esc","title":"FETtec 4-In-1 6S 35A DSHot 2400 ESC V1.1","description":"\u003cp\u003eFETtec has released a 4-In-1 6S 35A DShot 2400 ESC to complement the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/fettec-kiss-f7-flight-controller\" title=\"FETtec Kiss Flight Controller\" target=\"_blank\"\u003eFETtec KISS FC\u003c\/a\u003e and KISS FC.  With full sine wave control and all the latest features, this is the perfect ESC to pair with the new \u003ca href=\"https:\/\/www.defiancerc.com\/products\/fettec-kiss-f7-flight-controller\" title=\"FETtec KISS Flight Controller\" target=\"_blank\"\u003eflight controller\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eActive current limiting @ 35A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eInput voltage: 3S-6S\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eHigh quality 40V MOSFETs\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eSTM32G071 @ 64MHz\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003e128 kHz motor PWM\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eFull sine wave control\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eSoldering points for up to 5 additional capacitors\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eKISS FC Passthrough\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eBetaflight pass-through (available from 4.1)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eAutomatic input signal detection:\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eDshot 300-2400\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003ePWM\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eOneShot 42\/125\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eOneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eIn development: Crossfire, Sbus, Graupner HoTT\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-mark=\"1\"\u003eFor 6S LiPos we recommend using a \u003ca href=\"https:\/\/www.defiancerc.com\/products\/fettec-spike-absorber\" title=\"FETtec Spike Absorber\" target=\"_blank\"\u003eFETtec Spike Absorber\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003eDimensions:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Abmessungen.png?v=1582996061\" alt=\"FETtec 4-In-1 35A DShot 2400 ESC\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-mark=\"1\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FETtec 4-In-1 6S 35A DSHOT 2400 ESC V1.1\u003cbr\u003e1x 50V Capacitor \u0026lt;1ohm\u003cbr\u003e1x JST-SH 8 Pin Cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fettec.net\/media\/pdf\/3c\/9e\/a2\/FETtec_ESC_35a_Manual.pdf\" title=\"FETtec 4-In-1 35A DShot 2400 ESC\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fettec.net\/media\/pdf\/0a\/cc\/bb\/Betaflight_Passthrough_Guide.pdf\" title=\"Download Betaflight Passthrough Guide\" target=\"_blank\"\u003eDownload Betaflight Passthrough Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/FETtec\/ESC-Configurator\/releases\" title=\"FETtec ESC Configurator\" target=\"_blank\"\u003eDownload FETtec ESC Configurator\u003c\/a\u003e\u003c\/p\u003e","brand":"FETtec","offers":[{"title":"Default Title","offer_id":31247232991301,"sku":"","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/FETtec_4_In_1_6S_35A_DSHot_2400_ESC_V1_1_2.jpg?v=1690067508"},{"product_id":"holybro-tekko32-35a-blheli_32-esc","title":"Holybro Tekko32 35A BLHeli_32 ESC","description":"\u003cp\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/collections\/latest-products\/products\/holybro-tekko32-f4-45a-blheli_32-esc\" title=\"Holybro Tekko32 F4 45A ESC\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003eTekko32 is a BLHeli32 ESC from HolyBro. The Tekko32 ESC runs in conjunction with an ARM 32bit compatible MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band, is capable of both voltage and current monitoring and limiting, as well as offering customization of the brake on stop force. Unlike current ESCs, the Tekko32 ESC has A LOT of room to grow and wide compatibility range with future products.\u003c\/p\u003e\n\u003cp\u003eOne of the nicest features with the Tekko32 35A ESC is the auto timing feature, which (essentially) is designed to offer the pilot the smoothest and most efficient flight experience available, which is a freestyle pilots dream come true!\u003c\/p\u003e\n\u003cp\u003eWhat can the increased MCU speed do?\u003cbr\u003eFirst of all, it can run input signals with lower latency at faster rates.\u003cbr\u003eDshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.\u003cbr\u003eSecondly it allows packing of more functionality.\u003cbr\u003e– Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.\u003cbr\u003e– Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.\u003cbr\u003e– Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.\u003cbr\u003e– Like programmable brake on stop force. Which allows control of the braking of fixed wing props.\u003cbr\u003e– Like improved direction change in bidirectional mode.\u003cbr\u003e– Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit Compatible ESC (Blheli_32)\u003c\/li\u003e\n\u003cli\u003eDshot1200 up to 32kHz\u003c\/li\u003e\n\u003cli\u003eIncredibly small size\u003c\/li\u003e\n\u003cli\u003eVery low weight\u003c\/li\u003e\n\u003cli\u003eAuto Timing Feature\u003c\/li\u003e\n\u003cli\u003eOn-Board RGB LED\u003c\/li\u003e\n\u003cli\u003eBuild in Current sensor\u003c\/li\u003e\n\u003cli\u003eSmooth Response\u003c\/li\u003e\n\u003cli\u003eCompatible to BetaflightF3\/F4 Flight Controller\u003c\/li\u003e\n\u003cli\u003e2-6s LIPO input\u003c\/li\u003e\n\u003cli\u003e35A designed\u003c\/li\u003e\n\u003cli\u003eSize: 17.3*34.3*4.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Tekko32 F3 Metal ESC\u003cbr\u003e1x Electrolytic capacito: 220uF 35v\u003cbr\u003e1x 24AWG 100mm Black wire\u003cbr\u003e1x 24AWG 100mm White wire\u003cbr\u003e1x 24AWG 100mm Blue wire\u003cbr\u003e1x 16AWG 100mm Red wire\u003cbr\u003e1x 16AWG 100mm Black wire\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31295785435205,"sku":"","price":16.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_35A_BLHeli_32_ESC_6.jpg?v=1658199554"},{"product_id":"zeez-design-60amp-4-in-1-blheli_32-esc","title":"ZeeZ Design 60Amp 4-In-1 BLHeli_32 ESC","description":"\u003cp\u003eZeez Design is a new outfit designing products for the FPV community.  Zeez Design project was born in Italy in early 2016 from FPV racing pilots and students of the Engineer University of Bologna that wanted to develop their own gear for racing drones. The ZeeZ 60Amp 4-In-1 is their first BLHeli_32 ESC.\u003c\/p\u003e\n\u003cp\u003ePerfect in combo with the \u003ca href=\"https:\/\/www.defiancerc.com\/search?type=product\u0026amp;q=zeez\" target=\"_blank\" title=\"ZeeZ Design on Defiance RC\" rel=\"noopener noreferrer\"\u003eZeeZ Flight controller\u003c\/a\u003e or any other flight controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eInput: 3S-6S \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-quality Toshiba Mosfet: 60A continuous current draw \/90A peak current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware: BlHeli32 ZEEZ60A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAluminum HeatSink to cooldown the Mosfet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncluding 35V 470uF Low ESR Capacitor (and spare capacitor)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy wiring with connector included in package with Zeez F7 Flight Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBidirectional DSHOT capable for RPM filtering\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension: 37,50mm * 43mm \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/ESC4in1_Connection-1024x920.jpg?v=1593047739\" alt=\"ZeeZ 4-In-1 ESC Connections\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x ZeeZ Design 60Amp 4-In-1 BLHeli_32 ESC\u003cbr\u003e1x XT60 Pigtail\u003cbr\u003e2x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003cbr\u003e2x 470uF 35V Low ESR Capacitor\u003cbr\u003e1x ESC to Flight Controller Cable\u003c\/span\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31426814541893,"sku":"","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_Amp_In_BLHeli_ESC_6.jpg?v=1653427051"},{"product_id":"fettec-4-in-1-45a-dshot-2400-esc","title":"FETtec 4-In-1 45A DShot 2400 ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNow shipping V1.2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFETtec has released a 4-In-1 6S 45A DShot 2400 ESC to complement the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"FETtec Kiss Flight Controller\" href=\"https:\/\/www.defiancerc.com\/products\/fettec-kiss-f7-flight-controller\" target=\"_blank\"\u003eFETtec KISS FC\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand KISS FC.  With full sine wave control and all the latest features, this is the perfect ESC to pair with the new \u003ca title=\"FETtec KISS Flight Controller\" href=\"https:\/\/www.defiancerc.com\/products\/fettec-kiss-f7-flight-controller\" target=\"_blank\"\u003eflight controller\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActive current limiting @ 45A\u003c\/li\u003e\n\u003cli\u003eInput voltage: 3S-6S\u003c\/li\u003e\n\u003cli\u003eHigh-quality 40V MOSFETs\u003c\/li\u003e\n\u003cli\u003eSTM32G071 @ 64MHz\u003c\/li\u003e\n\u003cli\u003e128 kHz Motor PWM\u003c\/li\u003e\n\u003cli\u003eFull sine wave control\u003c\/li\u003e\n\u003cli\u003eSoldering holes for up to 5 additional capacitors\u003c\/li\u003e\n\u003cli\u003eKISS FC Passthrough\u003c\/li\u003e\n\u003cli\u003eBetaflight Passthrough (available in 4.1)\u003c\/li\u003e\n\u003cli\u003eAutomatic input signal detection:\n\u003cul\u003e\n\u003cli\u003eDshot 300-2400\u003c\/li\u003e\n\u003cli\u003ePWM\u003c\/li\u003e\n\u003cli\u003eOneShot 42\/125\u003c\/li\u003e\n\u003cli\u003eOneWire BUS with up to 8kHz looptime (one cable for all Motorsignals and Telemetry)\u003c\/li\u003e\n\u003cli\u003eIn development: Crossfire, SBUS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor 6S LiPos we recommend using a \u003c\/span\u003e\u003ca title=\"FETtec Spike Absorber\" href=\"https:\/\/www.defiancerc.com\/products\/fettec-spike-absorber\" target=\"_blank\"\u003eFETtec Spike Absorber\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"FETtec 45A 4-In-1 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/masse.png?v=1591039612\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FETtec 4-In-1 45A ESC V1.2\u003cbr\u003e1x Capacitor 50V, ESC \u0026lt; 1ohm (477CKE050M)\u003cbr\u003e1x JST-SH 8 Pin Cable\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Download Manual FETtec 4-In-1 45A ESC\" href=\"https:\/\/fettec.net\/media\/pdf\/cf\/1e\/c0\/FETtec_ESC_45a_Manual.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Download FETtec ESC Configurator\" href=\"https:\/\/github.com\/FETtec\/ESC-Configurator\/releases\" target=\"_blank\"\u003eDownload FETtec ESC Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"FETtec Betaflight Passthrough Guide\" href=\"https:\/\/fettec.net\/media\/pdf\/0a\/cc\/bb\/Betaflight_Passthrough_Guide.pdf\" target=\"_blank\"\u003eDownload Betaflight Passthrough Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"FETtec","offers":[{"title":"Default Title","offer_id":31587007660101,"sku":"","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/FETtec_4_In_1_45A_DShot_2400_ESC_0.jpg?v=1690067512"},{"product_id":"holybro-tekko32-f3-4-in-1-45a-esc","title":"Holybro Tekko32 F3 45A 4-In-1 ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-50a-blheli_32-4-in-1-esc\" title=\"Holybro Tekko32 F4 50A 4-In-1 ESC\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHolybro has updated its popular Tekko32 4-In-1 ESC.  The latest version includes the following enhancements over the older 40A model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced BEC, withstand voltage up to 80V.\u003c\/li\u003e\n\u003cli\u003eThe first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience.\u003c\/li\u003e\n\u003cli\u003eAmperage meter scale ratio has been adjusted to 185-195.\u003c\/li\u003e\n\u003cli\u003eThe mounting hole has been changed into M4 with anti-vibration silicone grommet Insert.\u003c\/li\u003e\n\u003cli\u003eThe PCB design uses a design in which the drive circuit and the control circuit are separated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO BEC\u003c\/li\u003e\n\u003cli\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eMounting holes 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eF3 MCU, runs double faster than F051\u003c\/li\u003e\n\u003cli\u003eExtra Cap needed for high current or 6s usage\u003c\/li\u003e\n\u003cli\u003eDimensions: 44x37x6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 13.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePinout:\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/7ee12aa3fe_480x480.png?v=1595939510\" alt=\"Holybro Tekko32 F3 45A 4-In-1 ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage includes:\u003c\/strong\u003e\u003cbr\u003e1x Tekko32 F3 \u003cspan\u003e45A \u003c\/span\u003e4-in-1 ESC \u003cbr\u003e4x Anti-Vibration Grommets\u003cbr\u003e1x Electrolytic capacitor: 1000uF 35v \u003cbr\u003e1x 8pin to 8pin 1mm pitch 65mm cable \u003cbr\u003e1x 8pin to 8pin 1mm pitch 25mm cable \u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31596212158533,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_45A_4_In_1_ESC_2.jpg?v=1658202658"},{"product_id":"holybro-tekko32-f3-metal-65a-blheli_32-esc","title":"Holybro Tekko32 F3 Metal 65A BLHeli_32 ESC","description":"\u003cp\u003eNewly updated Holybro Tekko32 F3 Metal 65A ESC features BLHeli_32 firmware with F3 MCU providing faster responding, smoother operating controller.  Supports up to 80A burst and 65A continuous.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe latest Tekko32 F3 Metal ESC has got improvements on both performance and appearance. Enhanced BEC, withstand voltage up to 80V.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eF3(M4 Core) MCU, Runs BLHeli_32 firmware, the MCU works at 108Mhz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMosfet tested at 4S 65A, under props, nothing covered for 1min\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e18 x 27 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports Lipo 3-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExt. cap needed for 6s (330uf 35v for 6s usage.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnboard WS2812B LED\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 4.4g (1pcs)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe motor idle throttle value can be adjusted in Betaflight configuration, under ESC\/Motor Features. When using dshot, the motor idle throttle value is recommended to be adjusted to “10” percent.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Tekko32 F3 Metal ESC\u003cbr\u003e1x Electrolytic Capacitor:  330uF 35v\u003cbr\u003e1x 24AWG 100mm Black Wire\u003cbr\u003e1x 24AWG 100mm White Wire\u003cbr\u003e1x 24AWG 100mm Blue Wire\u003cbr\u003e1x 16AWG 100mm Red Wire\u003cbr\u003e1x 16AWG 100mm Black Wire\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"4-Pack","offer_id":39436482347077,"sku":"","price":98.99,"currency_code":"USD","in_stock":false},{"title":"Single","offer_id":31596326355013,"sku":"","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_Metal_65A_BLHeli_32_ESC_8.jpg?v=1658201180"},{"product_id":"t-motor-velox-45a-blheli_32-3-6s-4-in-1-esc","title":"T-Motor Velox 45A BLHeli_32 3-6S 4-In-1 ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/t-motor-velox-v2-45a-3-6s-blheli_32-4-in-1-esc\" target=\"_blank\" title=\"T-Motor Velox 45A V2\" rel=\"noopener noreferrer\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA 4-In-1 BLHeli_32 ESC option from T-Motor.  The Velox line of ESCs provide the quality and performance expected from T-Motor, minus the high price.  With newly designed cooling fins and high-quality MOSFETs, expect a smooth flight experience with stability and power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Velox V45A\u003c\/li\u003e\n\u003cli\u003eCon. Current: 45A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBurst Current: 55A (10S);\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3-6S Lipo\u003c\/li\u003e\n\u003cli\u003eFirmware: Tmotor_32Bit\u003c\/li\u003e\n\u003cli\u003eSize: 44.6x41x7mm\u003c\/li\u003e\n\u003cli\u003eMounting Hole: 30.5x30.5mm M3\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686603142043.jpg?v=1592791861\" alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686604791267.jpg?v=1592791897\" alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686604932689.jpg?v=1592791918\" alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605490180.jpg?v=1592791939\" alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605904280.jpg?v=1592791953\" alt=\"T-Motor Velox 45A Connection Diagram\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605631502_8f852426-98c7-4b11-a02f-14f95e04c9e8.jpg?v=1592793067\" alt=\"T-Motor Velox 45A BLHeli_32 4-In-1 ESC\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x T-Motor Velox 45A BLHeli_32 4-In-1 ESC\u003cbr\u003e1x XT60 Power Lead\u003cbr\u003e1x Capacitor\u003cbr\u003e1x Manual\u003c\/p\u003e","brand":"Tiger Motors","offers":[{"title":"Default Title","offer_id":31664336928837,"sku":"","price":34.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/T_Motor_Velox_45A_BLHeli_32_3_6S_4_In_1_ESC_3.jpg?v=1658200810"},{"product_id":"holybro-kakute-f7-v1-5-and-tekko32-f3-4in1-45a-esc-stack","title":"Holybro Kakute F7 V1.5 and Tekko32 F3 4in1 45A ESC Stack","description":"\u003cp\u003eThis stack features Holybro's Kakute F7 V1.5 flight controller and Tekko32 F3 45A 4-In-1 ESC. Both products are fantastic and work together beautifully.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKakute F7 V1.5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates a flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eV1.5 - IMU updated to MPU6000, re-designed and more reliable dampening structure\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight.\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\n\u003cli\u003eSoft-mounting built-in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Approximately 130 amps maximum measurable value\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x41x7mm (includes foam-mounted gyro board in height)\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTekko32 45A 4-In-1 ESC\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe latest Tekko32 45A 4-In-1 ESC has got some improvements on its performance：\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced BEC, withstand voltage up to 80V.\u003c\/li\u003e\n\u003cli\u003eThe first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience.\u003c\/li\u003e\n\u003cli\u003eAmperage meter scale ratio has been adjusted to 185-195.\u003c\/li\u003e\n\u003cli\u003eThe mounting hole has been changed into M4 with anti-vibration silicone grommet Insert.\u003c\/li\u003e\n\u003cli\u003eThe PCB design uses a design in which the drive circuit and the control circuit are s\u003cspan\u003eeparated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO BEC\u003c\/li\u003e\n\u003cli\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eMounting holes 30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eF3 MCU, runs double faster than F051\u003c\/li\u003e\n\u003cli\u003eExtra Cap needed for high current or 6s usage\u003c\/li\u003e\n\u003cli\u003eDimensions: 44x37x6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Kakute F7 V1.5 +Tekko 32 F3 45A 4-In-1 ESC stack\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Electrolytic Capacitor: 1000uF 35v\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31709292462149,"sku":"","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_V1_5_and_Tekko32_F3_4in1_45A_ESC_Stack_7.jpg?v=1658203427"},{"product_id":"zeez-design-f7-2020-and-45a-blheli_32-stack","title":"ZeeZ Design F7 2020 and 45A BLHeli_32 Stack","description":"\u003cp\u003e\u003cspan\u003eZeeZ Design F7 2020 Flight Controller and 45A 4-in-1 BLHeli_32 ESC stack has all the features of its big sister but in small form factor.  Features 20x20 mounting holes, small size, and direct soldering connection and board space for TBS Nano RX and TBS Unify Pro32 Nano, this is a builder's dream.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eF7 2020 Flight Controller Specifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003eDirect solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.\u003c\/li\u003e\n\u003cli\u003eUp to 8S input (max 36V)\u003c\/li\u003e\n\u003cli\u003e5V BEC up to 3A continuous\u003c\/li\u003e\n\u003cli\u003eSTM32F722 MCU (Support Betaflight, INav, Emuflight)\u003c\/li\u003e\n\u003cli\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e128MB Onboard flash\u003c\/li\u003e\n\u003cli\u003eOSD chip Onboard\u003c\/li\u003e\n\u003cli\u003e6 available UARTS\u003c\/li\u003e\n\u003cli\u003eVTX switch to control the ON\/OFF of the VTX\u003cbr\u003edirectly from your transmitter (control via Betaflight with USER1 mode)\u003c\/li\u003e\n\u003cli\u003eLC Filter for 5V VTX and Camera\u003c\/li\u003e\n\u003cli\u003eUSB Type C connector\u003c\/li\u003e\n\u003cli\u003eOnboard RGB LED distribution for clean wiring\u003cbr\u003eto the LED on the arm of the quad.\u003c\/li\u003e\n\u003cli\u003e8 Onboard RBG LED (compliant with FAI Rules)\u003c\/li\u003e\n\u003cli\u003eLogic Side and USB current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e45A 4-In-1 BLHeli_32 ESC Specifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003e3S to 6S input\u003c\/li\u003e\n\u003cli\u003eConstant Current: 45A\u003c\/li\u003e\n\u003cli\u003ePeak Current: 55A\u003c\/li\u003e\n\u003cli\u003eSTM32L4 MCU (ARM Cortex M4, 80MHz frequency)\u003c\/li\u003e\n\u003cli\u003eBlHeli32 Firmware (support Dshot150\/ Dhsot300 \/Dshot600\/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)\u003c\/li\u003e\n\u003cli\u003e8 Pin JST connector and 8 Pin solder pads\u003c\/li\u003e\n\u003cli\u003eHoles for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)\u003c\/li\u003e\n\u003cli\u003eOnboard analog current sensor (Betaflight Scale: 200)\u003c\/li\u003e\n\u003cli\u003eESC telemetry to read RPM and ESC temperature\u003c\/li\u003e\n\u003cli\u003eCompatible with Bidirectional Dshot out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight and Dimension\u003c\/strong\u003e:\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight (including FC+ESC+ 8X Standoff + 4X Nut + 8 Pin connector) :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e19.9gr\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: ( L X W X H) :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e41.6mm X 33.6mm X 19.6 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Zeez F7  2020 Flight Controller\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Zeez ESC 4in1 45A 2020\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8x Aluminum Standoff\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Aluminum Nut\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to 8 Pin \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to Servo Connector\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 8 Pin Plastic Housing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 10 Pin Plastic Housing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 470uF 35V Low ESR Capacitor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x XT60 with 12AWG Silicon Cable for battery connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.00mm Header Pin for VTX connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.54mm Header Pin for Receiver connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31784744747077,"sku":"","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_F7_2020_and_45A_BLHeli_32_Stack_6.jpg?v=1658201589"},{"product_id":"zeez-design-2020-45amp-4-in-1-blheli_32-esc","title":"ZeeZ Design 2020 45Amp 4-In-1 BLHeli_32 ESC","description":"\u003cp\u003eZeeZ design's 2020 45 Amp 4-In-1 BLHeli_32 ESC features support for up to 6S input (make sure to solder the aluminium low ESR capacitor in the holes in the battery pads), BLHeli_32 firmware, \u003cspan\u003eDshot150\/ Dhsot300 \/Dshot600\/ProShot 1000, and ESC telemetry and Bi-Directional DSHOT for RPM Filter out of the box.  Fits just about anywhere, the ESC has 20x20 mounting holes and weighs barely 10g.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003e3S to 6S input\u003c\/li\u003e\n\u003cli\u003eConstant Current: 45A\u003c\/li\u003e\n\u003cli\u003ePeak Current: 55A\u003c\/li\u003e\n\u003cli\u003eSTM32L4 MCU (ARM Cortex M4, 80MHz frequency)\u003c\/li\u003e\n\u003cli\u003eBlHeli32 Firmware (support Dshot150\/ Dhsot300 \/Dshot600\/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)\u003c\/li\u003e\n\u003cli\u003e8 Pin JST connector and 8 Pin solder pads\u003c\/li\u003e\n\u003cli\u003eHoles for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)\u003c\/li\u003e\n\u003cli\u003eOnboard analog current sensor (Betaflight Scale: 200)\u003c\/li\u003e\n\u003cli\u003eESC telemetry to read RPM and ESC temperature\u003c\/li\u003e\n\u003cli\u003eCompatible with Bidirectional Dshot out of the box\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions:  55 × 55 × 20 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight:  10g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/ESC_dimension.jpg?v=1597335063\" alt=\"ZeeZ Design 45Amp 4-In-1 2020 BLHeli_32 ESC\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez 2020 45Amp 4-In-1 BLHeli_32 ESC\u003cbr\u003e4x Aluminium Standoff\u003cbr\u003e1x ESC to Flight Controller 8 Pin to Servo Connector\u003cbr\u003e2x 470uF 35V Low ESR Capacitor\u003cbr\u003e1x XT60 with 14AWG Silicon Cable for battery connection\u003cbr\u003e2x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31784751562821,"sku":"","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_Amp_In_BLHeli_ESC_4.jpg?v=1653427283"},{"product_id":"holybro-tekko32-f3-4-in-1-45a-mini-esc","title":"Holybro Tekko32 F3 4-In-1 45A Mini ESC","description":"\u003cp\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-mini-4-in-1-50a-am32-esc\" title=\"Holybro Tekko32 F4 Mini 4-In-1 50A AM32 ESC\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA 45Amp, 20x20 4-In-1 ESC featuring BLHeli_32, F3 MCU, and can withstand voltage up to 80V.  This is the first ESC with a default PWM output of 96K, giving you a smoother, more quiet experience. Another great product from Holybro.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eF3 MCU, runs double faster than F051\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e32bit ESC with BLHELI32 firmware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports 3-6S lipo input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePWM input, TLM supported\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVoltage output (VBAT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNO BEC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports damped light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExt. cap needed for 6s (1000uf 35v for 6s usage.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting holes M3, 20x20mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize:30 x 38 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 7.6g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/e5bdf4a7e4.png?v=1598317850\" alt=\"Holybro Tekko32 4-In-1 Mini 45A ESC\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Tekko32 F3 4-In-1 45A Mini ESC\u003cbr\u003e4x M2 Anti-Vibration Silicone Grommet Insert \u003cbr\u003e1x Electrolytic capacitor: 1000uF 35v\u003cbr\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003cbr\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31803755659333,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_4_In_1_45A_Mini_ESC_4.jpg?v=1658199264"},{"product_id":"holybro-tekko32-f3-metal-4-in-1-65a-esc","title":"Holybro Tekko32 F3 Metal 4-In-1 65A ESC","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca title=\"Holybro Tekk32 F4 Metal 4-In-1 65A AM32 ESC\" href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-metal-4-in-1-65a-am32-esc\"\u003eNew Version Here\u003c\/a\u003e\u003ca title=\"Holybro Tekk32 F4 Metal 4-In-1 65A AM32 ESC\" href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-mini-4-in-1-50a-am32-esc\"\u003e\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePremium 65A 4-In-1 ESC featuring an F3 MCU, which provides smoother control and faster response time.  Mosfets are covered in a metal case to increase heat dissipation.  The number of onboard capacitors makes other 4-in-1 ESCs look silly.  Another great product from Holybro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrades From Previous Version\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBetter optimized power path, providing more stable performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoubled capacity of onboard capacitors, now capable of 2068uf.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAmperage meter scale ratio has been adjusted to 168.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe first BLHeli_32 ESC in the market with default PWM output 96K giving you smoother and quieter experience.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli align=\"left\"\u003e\u003cspan\u003ePCB with 3oz copper design, capable of handling bigger current, and better heat dissipation capacity, Enhanced and more robust Lipo input pad for soldering.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli align=\"left\"\u003e\u003cspan\u003eThe PCB design uses a design in which the drive circuit and the control circuit are separated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eF3(M4 Core) 108Mhz MCU with BLHELI32 firmware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThe 4-In-1 has onboard analog current sensor, and TLM function(then no current reading\u003c\/span\u003e \u003cspan\u003eover TLM)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUses metal case MOSFET for better heat dissipation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo output BEC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports Lipo 4-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtra capacitor needed for 6s (1000uf 35v for 6s usage.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions:  43 x 44mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting holes:  30.5x30.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 15.8g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e\u003cbr\u003eAirflow is very important if you want to run this 4-In-1 in high current.\u003cbr\u003eThe input cable(from Lipo to 4in1)should be at least 12AWG and well soldered.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe motor idle throttle value can be adjusted in Betaflight configuration, under ESC\/Motor Features. When using dshot, the motor idle throttle value is recommended to be adjusted to “10” percent.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"Holybro Tekko32 F3 Metal 4-In-1 65A ESC Pinout\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/a23d3528ba.png?v=1598319245\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/a23d3528ba.png?v=1598319245\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Tekko32 F3 Metal 4-In-1 65A ESC\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e4x M3 Anti-Vibration Silicone Grommet Insert\u003cbr\u003e1x Electrolytic capacitor: 1000uF 35v\u003cbr\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003cbr\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31803776565317,"sku":"","price":74.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_Metal_4_In_1_65A_ESC_8.jpg?v=1658199476"},{"product_id":"t-motor-pacer-60a-4-in-1-esc","title":"T-Motor Pacer 60A BLHeli_32 3-6S 4-In-1 ESC","description":"\u003cp\u003eThe T-Motor Pacer 60A 4-In-1 is a top of the line option at an amazing price. These BLHeli_32 ESCs provide the same quality and performance expected of a T-Motor product, but at a price that astounds. Newly designed cooling fins and high-quality MOSFETs provide a smooth flight experience with power and stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Pacer P60A\u003c\/li\u003e\n\u003cli\u003eCon. Current: 60A\u003c\/li\u003e\n\u003cli\u003eBurst Current: 70A (10S)\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3-6S Lipo\u003c\/li\u003e\n\u003cli\u003eFirmware: Tmotor_32Bit\u003c\/li\u003e\n\u003cli\u003eSize: 44.6x41x7mm\u003c\/li\u003e\n\u003cli\u003eMounting Hole: 30.5x30.5mm M3\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686603142043.jpg?v=1592791861\"\u003e\u003cbr\u003e\u003cimg alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686604791267.jpg?v=1592791897\"\u003e\u003cbr\u003e\u003cimg alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686604932689.jpg?v=1592791918\"\u003e\u003cbr\u003e\u003cimg alt=\"T-Motor Velox 45A 4-In-1 BLHeli_32 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605490180.jpg?v=1592791939\"\u003e\u003cbr\u003e\u003cimg alt=\"T-Motor Velox 45A Connection Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605904280.jpg?v=1592791953\"\u003e\u003cbr\u003e\u003cimg alt=\"T-Motor Velox 45A BLHeli_32 4-In-1 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1591686605631502_8f852426-98c7-4b11-a02f-14f95e04c9e8.jpg?v=1592793067\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes\u003c\/b\u003e:\u003cbr\u003e1x T-Motor Pacer P60A 4in1 ESC \u003cbr\u003e1x Power Cable w\/Connector \u003cbr\u003e1x Connection Cable \u003cbr\u003e1x Capacitor \u003cbr\u003e1x Manual\u003c\/p\u003e","brand":"Tiger Motors","offers":[{"title":"Default Title","offer_id":31847881637957,"sku":"","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/T_Motor_Pacer_60A_BLHeli_32_3_6S_4_In_1_ESC_3.jpg?v=1658200124"},{"product_id":"holybro-tekko32-f3-45a-mini-4-in-1-esc","title":"Holybro Tekko32 F3 45A Mini 4-In-1 ESC","description":"\u003cp\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-tekko32-f4-mini-4-in-1-50a-am32-esc\" title=\"Holybro Tekko32 F4 Mini 4-In-1 50A AM32 ESC\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003eThis updated version of the BLHeli_32 20x20 4-in-1 mini 45A ESC adopts the F3 MCU, which provides smoother control and faster response speed.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe all-new PCB uses a design in which the drive circuit and the control circuit are separated. This broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.  What this means is an ESC that performs better while at the same time causes less interference with all your other electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3 MCU, double the speed of F051\u003c\/li\u003e\n\u003cli\u003e32bit ESC with BLHeli_32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S LiPo input\u003c\/li\u003e\n\u003cli\u003eDefault PWM output 96K\u003c\/li\u003e\n\u003cli\u003eAmperage meter scale ratio has been adjusted to 185.\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO output BEC\u003c\/li\u003e\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eExt. cap needed for 6s (1000uf 35v for 6s usage.)\u003c\/li\u003e\n\u003cli\u003eMounting holes: 20x20mm(M3)\u003c\/li\u003e\n\u003cli\u003eSize:32 x 38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca title=\"Holybro Tekko32 F3 Mini 4-In-1 45A ESC Pinout\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/0bed6bf4bc.png?v=1601525153\" target=\"_blank\"\u003e\u003cimg height=\"600x600\" width=\"600x600\" style=\"float: none;\" alt=\"Holybro Tekko32 F3 45A Mini 4-In-1 ESC Pinout\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/0bed6bf4bc_600x600.png?v=1601525153\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Tekko32 F3 Mini 45A 4-In-1 ESC\u003cbr\u003e4x M2 Anti-Vibration Silicone Grommet Insert\u003cbr data-mce-fragment=\"1\"\u003e1x Electrolytic capacitor: 1000uF 35v\u003cbr data-mce-fragment=\"1\"\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003cbr data-mce-fragment=\"1\"\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003cbr\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31878658162757,"sku":"","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Tekko32_F3_45A_Mini_4_In_1_ESC_1.jpg?v=1658200015"},{"product_id":"flywoo-goku-hex-f745-16x16-stack","title":"Flywoo Goku Hex F745 16x16 Stack","description":"\u003cp\u003eThe Flywoo Goku Hex F745 Stack includes the Hex F745 Flight Controller and the Hex BS13A ESC.  This FC uses\u003cspan data-mce-fragment=\"1\"\u003e a powerful F745 BGA chip, features a \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ebarometer, black box, WS2812LED, \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esupport 7 complete hardware serial ports, I2C, and other functions.  Enough to meet all FPV needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eYou need this stack if you are considering the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" title=\"Hexplorer Frame Kit\" target=\"_blank\"\u003eFlywoo Hexplorer 4 LR Frame Kit\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGOKU F745 BGA Flight Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSIZE: 22*23mm Weight: 2.3g\u003c\/li\u003e\n\u003cli\u003eHole: 16*16-3mm\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F745\u003c\/li\u003e\n\u003cli\u003eUARTS: 1\/2\/3\/4\/5\/6\/7\u003c\/li\u003e\n\u003cli\u003eI2C: SCL\/SDA\u003c\/li\u003e\n\u003cli\u003eGYRO: MPU6000\u003c\/li\u003e\n\u003cli\u003eBARO: BMP280 BEC: 5V 2A\u003c\/li\u003e\n\u003cli\u003eLED:4*WS2812 FLASH: 8M\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 2-4S\u003c\/li\u003e\n\u003cli\u003eFirmware: FLYWOOF745NANO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGOKU HEX 6IN1 BS13A ESC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBS13A BLheli_S 2-6S 4in1\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003cli\u003eMounting Hole: 16x16mm (M3)\u003c\/li\u003e\n\u003cli\u003eSupport Oneshot, Multishot, DShot150\/300\/600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"Flywoo Goku Hex F745 Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/6d17dad41e042976808c9242e688adc6_2048x2048_292a619f-d125-4d6a-9d95-79251f197830.jpg?v=1609818687\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Goku Hex F745 Flight Controller\u003cbr\u003e1x Goku Hex BS13A ESC\u003c\/p\u003e\n\u003cp\u003eThis stack works great in the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" title=\"Hexplorer Frame Kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" target=\"_blank\"\u003eFlywoo Hexplorer 4 LR Frame Kit\u003c\/a\u003e\u003c\/p\u003e","brand":"Flywoo","offers":[{"title":"Default Title","offer_id":32022031073349,"sku":"","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Flywoo_Goku_Hex_F745_16x16_Stack_6.jpg?v=1658202675"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/collections\/image.jpg?v=1661115191","url":"https:\/\/www.defiancerc.com\/collections\/electronic-speed-control.oembed?page=5","provider":"defianceRC","version":"1.0","type":"link"}