{"title":"Flight Controller","description":"\u003cdiv class=\"Polaris-Layout__Section_1b1h1\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Polaris-Card_yis1o\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Polaris-Card__Section_1b1h1\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp class=\"_2YLsH\" data-mce-fragment=\"1\"\u003eFlight Controllers for controlling your multirotors\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","products":[{"product_id":"kiss-flight-controller-32bit-v1-03","title":"KISS Flight Controller - 32bit V1.03","description":"\u003cp\u003e\u003cstrong\u003eKISS FC - 32bit Flight Controller V1.03\u003c\/strong\u003e\u003cbr\u003eAs we felt the need for a modern more simplified 32bit Flight Controller, we made the KISS FC, which includes custom Flight Control Firmware development that gets rid of some old ballast, this took some time, but the result is very pleasing.\u003cbr\u003e\u003cbr\u003eThe Idea was to simplify some things and due to intensive long term testings by some fantastic Pilots we were able to optimize firmware code to a point where you are able to hopefully get your quad in the air quick and have it perform the way you want.  Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well known Pilots for given configurations and of course can tweak PIDs yourself over the GUI.\u003cbr\u003e\u003cbr\u003eThe software setup side is reduced as much as we can, many things are already taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick.  A new feature is also the built in telemetry, in combination with our 32bit ESC line, its possible to show live telemetry data via OSD on your FPV live feed or in the KISS FC GUI.  This way you get useful information like the Voltage of your battery, current consumption, ESC temperature and motor RPM.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003cbr\u003eWeight: 4.6g\u003cbr\u003eMounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)\u003cbr\u003eVoltage: 2-6S\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupported RX types:\u003cbr\u003e\u003cspan\u003e- PPM Sum\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Spektrum Sat. (serial \/ DSM2 \u0026amp; DSMX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Futaba \/ Taranis SBUS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Jeti ExBus\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Graupner SumD \/ SumO\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MultiPlex\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- classic RX with single channel output\u003c\/span\u003eDriver for STM32F303CCT6\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eSupported copter types:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Tri\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Quad +\/x\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Hexa +\/x\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eChanges in V1.03:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- changed bootloader solderpads to a press button\u003cbr\u003e\u003cspan\u003e- changed USB Port type\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/flyduino.net\/ultraesc\/downloads\/Flyduino-KISS-FlightController-Manual-v1.06-en.pdf\"\u003eManual Download\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/chrome.google.com\/webstore\/detail\/kissfc\/hecmfiemalajlglacajmnplhjmnkinpm\/related?hl=de\"\u003eChrome GUI APP Download\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.rcgroups.com\/forums\/showthread.php?t=2555204\"\u003eRCGroups Support and Downloads\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e1x KISS 32bit Flight Controller\u003c\/p\u003e","brand":"Flyduino","offers":[{"title":"Default Title","offer_id":22780294982,"sku":null,"price":43.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/KISS_Flight_Controller_32bit_V1_03_6.jpg?v=1658199317"},{"product_id":"piko-blx-micro-flight-controller-pdb","title":"PIKO BLX Micro Flight Controller \/ PDB","description":"\u003cstrong\u003ePIKO BLX Micro Flight Controller\u003cbr\u003e\u003c\/strong\u003e\n\u003cp\u003eDesigned nothing short of revolutionary, the PIKO BLX Micro Flight Controller changes everything - the true ultimate in the insanity fueled micro FPV racing scene.\u003c\/p\u003e\n\u003cp\u003eUltra light, astonishingly small and packed with massive levels of performance capability, the PIKO BLX is the one and only flight controller that is ready \u0026amp; waiting to devastate the micro FPV competition. Unlike any other system available today, the PIKO BLX provides an all in one solution that brings forth the ultimate in simplified sophistication, utilizing industry leading technology that has never been seen in a system this compact.\u003c\/p\u003e\n\u003cp\u003eCluttered \u0026amp; complex wiring? Never again. With an industry 1st gold plated PDB that is integrated within,the PIKO BLX provides the ultimate in soldering ease with the highest grade of connectivity, allowing direct soldering points for motors, VTx, Receiver and FPV Camera. Simplicity has met its match, and we have yet to get started.\u003c\/p\u003e\n\u003cp\u003eUtilizing the very latest F3 chip processor with built in CleanFlight \u0026amp; BetaFlight firmware, the PIKO BLX utilizes industry leading components with an included LC filter for the very best in signal reception. Add the 2A 5V BEC with a built in Sbus inverter, and the PIKO BLX stands alone amongst all the rest with a potent blend of race ready madness.\u003c\/p\u003e\n\u003cp\u003eSpecified for micro FPV racing, the ultra small footprint of the PIKO BLX is the perfect fusion of nano racing mania, providing a flight controller experience second to none. This adhesion of performance, capability \u0026amp; simplicity is the apex of nano FPV flight, providing the end user with an FPV experience that brings everything to the table in a zero compromise design.\u003c\/p\u003e\n\u003cp\u003eFor the pinnacle in simplicity, performance and cutting edge capability, the PIKO BLX is the ultimate solution when it comes to the micro FPV world. Get yours today, and change the way you FPV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e- The FIRST and ONLY 20X20mm platform micro flight controller with F3 chip\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- The FIRST and ONLY micro flight controller with PDB built-in \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Heavy Duty 2A BEC @ 5V Output Built-in\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- LC filter Built-in\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Built In Buzzer\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Gold Plated Pads for the Very Best Connectivity\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Firmware Perfection via CleanFlight \u0026amp; BetaFlight\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Sbus Ready w\/ Built In Inverter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Frysky Telemetry, Ready \u0026amp; Waiting\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Full USB Support\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mounting Simplicity via 3mm Screws\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Ultra Compact Design for Ease of Installation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003e \u003ca href=\"http:\/\/furiousfpv.com\/dev\/ReleaseHexfilePIKO.zip\"\u003eRelease Hexfile PIKO.zip\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"http:\/\/furiousfpv.com\/dev\/Piko%20BLX%20FC%20Manual.pdf\"\u003ePiko BLX FC Manual.pdf\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1x PIKO BLX Micro Flight Controller \/ PDB\u003c\/p\u003e","brand":"Furious FPV","offers":[{"title":"Default Title","offer_id":27207004614,"sku":null,"price":38.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/PIKO_BLX_Micro_Flight_Controller_PDB_1.jpg?v=1658198376"},{"product_id":"kombini-flight-controller","title":"KOMBINI Flight Controller","description":"\u003cp\u003e\u003cstrong\u003eKombini Flight Controller\u003c\/strong\u003e\u003cbr\u003eDesigned nothing short of revolutionary, the Furious KOMBINI Flight Controller steps up the competition with feature packed insanity that is ready to alter your FPV world.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Unlike any other system available today, the Furious KOMBINI provides an all in one solution that brings forth the ultimate in simplified sophistication. This all encompassing FC solution utilizes industry leading technology that has never been seen in a system this compact and powerful - the ultimate end game for high powered FPV flight.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Cluttered \u0026amp; complex wiring? Never again. With an industry 1st gold plated PDB that is integrated within, the KOMBINI FC provides the ultimate in soldering ease with the highest grade of connectivity, allowing direct soldering points for motors, VTx, Receiver and FPV Camera. Rated with 150A of current protection @ 5S 18.5V input power, the KOMBINI is ready to push the boundaries of aggressive FPV flight.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Utilizing the very latest F3 chip processor with built in CleanFlight \u0026amp; BetaFlight firmware, the Furious KOMBINI utilizes industry leading components with an included LC filter for the very best in signal reception. Add the 2A 5V BEC with a built in Sbus inverter \u0026amp; Spektrum satellite port, and the KOMBINI FC stands alone amongst all the rest with a potent blend of race ready madness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Sized at 36mm x 36mm, the compact footprint of the KOMBINI FC is the perfect application of race ready aggression, providing a flight controller experience second to none. This adhesion of performance, capability \u0026amp; simplicity is the apex of FPV flight, providing the end user with a flight experience that brings everything to the table in a zero compromise design.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e For the pinnacle in simplicity, performance and cutting edge capability, the Furious KOMBINI is the feature packed FC system that is ready and waiting to dominate. Get yours today, and change the way you FPV.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e EPIC FLIGHT PERFORMANCE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e The Furious KOMBINI Flight Controller utilizes an advanced processor, sensor and software technology to allow your aircraft to fly like it's on rails. Combined with BetaFlight software, this system enables the precision and control for ultra fast FPV.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e F3 GENERATION CPU\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Incorporates an STM32 F3 processor with a hardware floating point unit, providing ultra efficient flight calculations and a faster ARM-Cortex M4 core.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e BUILT IN 5V and 12V REGULATOR (BEC)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Don't limit your power! This Furious flight controller is equipped with 12V 0.8A output with a built in LC filter for the best results! The Kombini FC takes direct lipo voltage to power everything.  Furious FPV KOMBINI flight controller is \u003cstrong\u003e\u003cspan\u003ethe first flight controller that incorporates 12V BEC\u003c\/span\u003e\u003c\/strong\u003e in to for VTXs that need higher voltage than 5V.  With 12V BEC, the cameras and VTXs are more stable.  It also has built-in 5V 2A BEC and LC liter built-in so pilots have options to choose either using 12V for high voltage VTXs\/cameras or 5V BEC for led strips or 5V VTXs\/cameras\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e PDB BUILT IN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Clean, simple and easy to setup with massive 150A current protection that is 5S 18.5V ready.  \u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e ONESHOT \u0026amp; MULTI-SHOT ESC SUPPORT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Full support for OneShot \u0026amp; MultiShot ESC's for ultra easy PID tuning with sharper overall response. Pass through ESC-BLHELI programming and configuration with VCP USB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e RACE TIMING TRANSPONDER READY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Incorporates a built in race transponder system to track your laps and record your lap times. Each board includes a unique transponder code to identify your aircraft during race events, and is fully compatible with i-LAP receiver systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e OSD READY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eReady to be combined with an optional compact, stackable OSD system - available soon via Furious FPV.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e MICRO SIZED \u0026amp; ULTRA LIGHT WEIGHT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e The Furious KOMBINI FC is 36mm x 36mm in size and utilizes 30.5mm spacing with M3 mounting holes. The KOMBINI incorporates a high quality, gold plated, 4-layer printed circuit board - all at a 6g all up weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e MPU-6000 SPI-BUS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Gyro chip for faster acquisition of gyro based date and low noise functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e LC FILTER\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Built in LC filter for ultra clean video clarity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e TELEMETRY SUPPORT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Ultra compatible with Frsky telemetry, SmartPort, and HoTT telemetry support.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e CONFIGURABLE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e The KOMBINI FC runs CleanFlight, which can be configured to suit your needs utilizing a cross platform GUI (Windows\/OSX \/Linux).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e MICRO USB PORT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e The only full featured mini sized board with USB socket, which is not shared with serial ports. Config and Flash via USB or Serial port.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e BROAD RC RECEIVER SUPPORT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Supports SBus, SumH, SumD, Spektrum 1024\/2048, XBus, and PPM with a built in Spektrum satellite port. No external inverters required (built in) with receiver powered via flight battery or USB for easy configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e ALL FEATURES AVAILABLE AT ONCE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Connect your USB\/SmartPort\/Sbus\/GPS\/LED Strip\/Battery Monitoring\/Sonar\/Motors - all at the very same time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e REVERSE CURRENT PROTECTION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Protected with LiPo and USB inputs for problem free ESC calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e PROGRAMMABLE LED'S\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Incorporates an output for multi-colored LED strips, which are excellent for FPV racing, line of sight orientation, and night flight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e BATTERY MONITORING\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Built in battery voltage monitoring with an input for additional onboard current monitoring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e BUZZER\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e Buzzer port for audible warnings and setup notifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e SERIAL PORTS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e 3 independent Serial Ports (UART1, UART2, and UART3) that are NOT shared with the USB port.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan\u003e- Latest Generation F3 Processor Chip\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e- Simplicity Defined with Built In PDB\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e- Massive 150A PDB Current Protection\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e- LC Filter \u0026amp; 12v\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e- 800mA BEC for VTX\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- 5S 18.5V Ready\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Heavy Duty 2A BEC @ 5V and 0.8A BEC @12V Output\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Ultra Compact Design for Ease of Installation\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Gold Plated Pads for the Very Best Connectivity\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Firmware Perfection via CleanFlight \u0026amp; BetaFlight\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- BLHeli Pass Through Setup\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Compact Sizing w\/ 30.5mm x 30.5mm Mounting Holes\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Included Spektrum Satellite Port\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Frysky Telemetry, Ready \u0026amp; Waiting\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003e- Full USB Support\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e- MPU6000 SP1 Chip\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBETAFLIGHT TARGET\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/NightHawk32\/cleanflight\/releases\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003ehttps:\/\/github.com\/NightHawk32\/cleanflight\/releases\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eHow to generate Transponder ID on Kombini\/Piko\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=X23mUVKYAds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003ehttps:\/\/www.youtube.com\/watch?v=X23mUVKYAds\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Kombini Flight Controller\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Furious FPV","offers":[{"title":"Default Title","offer_id":29687561676,"sku":null,"price":48.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/KOMBINI_Flight_Controller_2.jpg?v=1653428381"},{"product_id":"motolab-tempest-flight-controller-with-integrated-pdb","title":"Motolab Tempest Flight Controller With Integrated PDB V1.2","description":"\u003cp\u003e\u003cstrong\u003eMotolab Tempest Flight Controller With Integrated PDB\u003c\/strong\u003e\u003cstrong\u003e V1.2\u003cbr\u003e\u003c\/strong\u003eDesigned with the fpv racer in mind, the Motolab Tempest provides the heart of your mini quad with everything it needs to win.  A F3 flight controller, along with a built in PDB can help simplify as well as clean up your builds tremendously.  This high quality product should be on every fpv pilot's list.\u003c\/p\u003e\n\u003cp\u003eThe Tempest uses the same STM32F3 CPU with ARM-Cortex M4 core and floating-point coprocessor for more efficient execution of fast-looptime control algorithms, along with the low-noise MPU-6000 SPI-bus gyro chip for faster acquisition of gyro data.\u003c\/p\u003e\n\u003cp\u003eThis board is compatible with Cleanflight and Betaflight firmware, using the MOTOLAB target files. The PWM outputs are bidirectional, and the board is compatible with BLHeli ESC passthrough programming through the USB port using BLHeliSuite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA single connection for the lipo to power both the flight controller and ESCs. \u003c\/li\u003e\n\u003cli\u003eAn on-board 1.5A 5V current-limited switching regulator for direct connection to lipos up to 4S, or up to 6S with power filtering. \u003c\/li\u003e\n\u003cli\u003eA 1A rated LC-filtered power output for VTX\/camera. \u003c\/li\u003e\n\u003cli\u003eUSB interface independent of UART channels. \u003c\/li\u003e\n\u003cli\u003eThree hardware UARTs. \u003c\/li\u003e\n\u003cli\u003eReverse current protection on lipo and USB inputs for problem-free ESC calibration. \u003c\/li\u003e\n\u003cli\u003eDedicated serial LED\/transponder output with regulated 5V and GND. \u003c\/li\u003e\n\u003cli\u003eOn-board buzzer driver with 5V and lipo voltage option. \u003c\/li\u003e\n\u003cli\u003eBuilt-in VBAT monitor with low-pass filter from lipo input. \u003c\/li\u003e\n\u003cli\u003eDedicated SAT receiver interface with 3.3v using JST connector for compatibility with Spektrum\/LemonRC cables. \u003c\/li\u003e\n\u003cli\u003eDedicated PPM and serial receiver interfaces with 5V power using 0.1\" headers. \u003c\/li\u003e\n\u003cli\u003eCompatibility with receivers using Spektrum 1024\/2048, SBUS, SumD and SumH receivers with built-in inverter. \u003c\/li\u003e\n\u003cli\u003eHigh-quality gold plated multilayer printed circuit board. \u003c\/li\u003e\n\u003cli\u003eConnector location on the board edges for convenient access to serial interfaces and other peripherals. \u003c\/li\u003e\n\u003cli\u003ePWM outputs on the corners near the motors. \u003c\/li\u003e\n\u003cli\u003ePlated holes for all connections, with the exception of USB and UART 1 on quick-connect JST-SH.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAssembly note: For the cleanest build, run wiring under the board where possible. Cut and strip wires to the appropriate length, twist and pre-tin the wire ends with solder, and insert the wires into the bottom side of the PCB. Solder from the top side.\u003c\/p\u003e\n\u003cp\u003ePin-out has changed from V1.1 to V1.2 - Please take note\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Motolab Tempest Flight Controller With Integrated PDB V1.2\u003c\/p\u003e","brand":"Motolab","offers":[{"title":"Default Title","offer_id":29890916492,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Motolab_Tempest_Flight_Controller_With_Integrated_PDB_V1_2_7.png?v=1658202412"},{"product_id":"motolab-cyclone-stm32f3-flight-controller","title":"Motolab Cyclone STM32F3 Flight Controller V1.2","description":"\u003cp\u003e\u003cstrong\u003eMotolab Cyclone STM32F3 Flight Controller V1.2\u003cbr\u003e\u003c\/strong\u003eThe Motolab Cyclone is a fantastic flight controller designed with practiciality and racing in mind.  Perfect for mini multirotors and compatible with Cleanflight and Betaflight, this FC is the perfect choice.\u003c\/p\u003e\n\u003cp\u003eThe Cyclone uses the STM32F3 CPU with ARM-Cortex M4 core and floating-point coprocessor for more efficient execution of fast looptime control algorithms, along with the low-noise MPU-6000 SPI-bus gyro chip for faster acquisition of gyro data.\u003c\/p\u003e\n\u003cp\u003eThis board is compatible with the recent revisions of Betaflight firmware, using the betaflight_MOTOLAB target files. The PWM outputs are bidirectional, and the board is compatible with BLHeli ESC passthrough programming using an external CP2102 USB-to-serial converter connected to UART 1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn on-board 600mA switching regulator for direct connection to lipos up to 4S, or up to 6S with power filtering.\u003c\/li\u003e\n\u003cli\u003eUSB interface independent of UART channels.\u003c\/li\u003e\n\u003cli\u003eThree hardware UARTs. The UART 2 TxD signal is also pinned out to a connector.\u003c\/li\u003e\n\u003cli\u003eReverse current protection on lipo and USB inputs for problem-free ESC calibration.\u003c\/li\u003e\n\u003cli\u003eDedicated serial LED output with lipo voltage and GND.\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer driver with 5V and lipo voltage option.\u003c\/li\u003e\n\u003cli\u003eBuilt-in VBAT monitor with low-pass filter from lipo input.\u003c\/li\u003e\n\u003cli\u003eBuilt-in RSSI monitor with low-pass filter.\u003c\/li\u003e\n\u003cli\u003eDedicated SAT receiver interface with 3.3v using JST connector for compatibility with Spektrum\/LemonRC cables.\u003c\/li\u003e\n\u003cli\u003eDedicated PPM and serial receiver interfaces with 5V power using 0.1\" headers.\u003c\/li\u003e\n\u003cli\u003eCompatibility with receivers using Spektrum 1024\/2048, SBUS, SumD and SumH receivers with built-in inverter.\u003c\/li\u003e\n\u003cli\u003eHigh-quality gold plated 4-layer printed circuit board.\u003c\/li\u003e\n\u003cli\u003eConnector arrangement for convenient access to serial interfaces, with PWM and other device connections on sturdy through-hole pin headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Motolab Cyclone STM32F3 Flight Controller Version 1.2\u003c\/p\u003e","brand":"Motolab","offers":[{"title":"Default Title","offer_id":29891121804,"sku":null,"price":33.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Motolab_Cyclone_STM32F3_Flight_Controller_V1_2_4.png?v=1658201197"},{"product_id":"motolab-typhoon-f4-flight-controller","title":"MotoLab Typhoon F4 Flight Controller","description":"\u003cp\u003eMotoLab's flight controllers have always been on the forefront of innovation and their newly released Typhoon F4 flight controller is no exception.  It features all the latest technologies you would want in a flight controller, plus a built in PDB with current sensor, filtered 5v regulator to power other electronics, and the new VTX interface, that allows you to stack the Typhoon VTX directly on top of this FC, without any cabling.  For the ultimate in clean installation and performance, the Typhoon is sure to blow you away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e168MHz STM32F4 version of Tempest\u003c\/li\u003e\n\u003cli\u003e100+A PDB with motor current sensor\u003c\/li\u003e\n\u003cli\u003eMPU6000 gyro\/acc on SPI bus\u003c\/li\u003e\n\u003cli\u003eUp to 4 serial ports plus USB\u003c\/li\u003e\n\u003cli\u003eUp to 6 Dshot motor outputs\u003c\/li\u003e\n\u003cli\u003eSerial inverters for SBUS and S.PORT\u003c\/li\u003e\n\u003cli\u003e1.5A 5V regulator with LC filtered 5V for VTX and camera\u003c\/li\u003e\n\u003cli\u003ePlug-in connection to VTX board\u003c\/li\u003e\n\u003cli\u003e38x40mm board size with 30.5mm mounting hole spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThe Typhoon F4 is compatible with Betaflight using the new MOTOLABF4 board target.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe F4 board mates directly with the VTX board with no external wiring between the two.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLatest MotoLab Typhoon info \u003ca href=\"https:\/\/www.rcgroups.com\/forums\/showpost.php?p=33136529\u0026amp;postcount=2\" title=\"MotoLab Typhoon Discussion\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/TyphoonPinOut.pdf?13797910271503172226\" title=\"MotoLab Typhoon F4 Flight Controller Pinout\"\u003e\u003cspan\u003eTyphoon F4 Flight Controller Pinout\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/motolab-typhoon-vtx\" title=\"MotoLab Typhoon VTX\" target=\"_blank\"\u003e\u003cspan\u003eTyphoon VTX\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/motolab-typhoon-f4-flight-controller-vtx-combo\" title=\"MotoLab Typhoon F4 FC + VTX Combo\" target=\"_blank\"\u003e\u003cspan\u003eTyphoon FC + VTX Combo\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x MotoLab Typhoon F4 Flight Controller\u003c\/span\u003e\u003c\/p\u003e","brand":"Motolab","offers":[{"title":"Default Title","offer_id":39494478284,"sku":"","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/MotoLab_Typhoon_F4_Flight_Controller_1.jpg?v=1658199570"},{"product_id":"motolab-typhoon-f4-flight-controller-vtx-combo","title":"MotoLab Typhoon F4 Flight Controller + VTX Combo","description":"\u003cp\u003eBuy the Typhoon F4 Flight Controller and VTX together.  You get both the flight controller and video transmitter in one package.  Perfect for your next build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTyphoone F4 Flight Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e168MHz STM32F4 version of Tempest\u003c\/li\u003e\n\u003cli\u003e100+A PDB with motor current sensor\u003c\/li\u003e\n\u003cli\u003eMPU6000 gyro\/acc on SPI bus\u003c\/li\u003e\n\u003cli\u003eUp to 4 serial ports plus USB\u003c\/li\u003e\n\u003cli\u003eUp to 6 Dshot motor outputs\u003c\/li\u003e\n\u003cli\u003eSerial inverters for SBUS and S.PORT\u003c\/li\u003e\n\u003cli\u003e1.5A 5V regulator with LC filtered 5V for VTX and camera\u003c\/li\u003e\n\u003cli\u003ePlug-in connection to VTX board\u003c\/li\u003e\n\u003cli\u003e38x40mm board size with 30.5mm mounting hole spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe Typhoon F4 is compatible with Betaflight using the new MOTOLABF4 board target.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe F4 board mates directly with the VTX board with no external wiring between the two.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/TyphoonPinOut.pdf?13797910271503172226\" title=\"MotoLab Typhoon F4 Flight Controller Pinout\"\u003e\u003cspan\u003eTyphoon F4 Flight Controller Pinout\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTyphoon Video Transmitter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25\/200\/500mW switchable, 40-ch video transmitter\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD\u003c\/li\u003e\n\u003cli\u003eMicroSD slot for Blackbox\u003c\/li\u003e\n\u003cli\u003eDirect plug-in connection to camera and antenna with available custom cables\u003c\/li\u003e\n\u003cli\u003ePass-through connector for camera joystick\u003c\/li\u003e\n\u003cli\u003e38x38mm board with 30.5mm mounting hole spacing\u003c\/li\u003e\n\u003cli\u003eU.FL Antenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe Typhoon VTX is a self-contained video system, operating on filtered 5V provided by the Typhoon F4. The video is isolated from the PDB motor current noise and delivers cleaner video.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe VTX board mates directly with the F4 controller board with no external wiring between the two.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: The VTX board is not powered from the USB input. The board should NOT be powered from lipo without an antenna connected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eU.FL to SMA Antenna Pigtail available \u003ca href=\"https:\/\/www.defiancerc.com\/products\/u-fl-to-sma-antenna-pigtail\" title=\"U.FL to SMA Antenna Pigtail\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x MotoLab Typhoon F4 Flight Controller\u003cbr\u003e1x MotoLab Typhoon VTX\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLatest MotoLab Typhoon info \u003ca href=\"https:\/\/www.rcgroups.com\/forums\/showpost.php?p=33136529\u0026amp;postcount=2\" title=\"MotoLab Typhoon Discussion\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/motolab-typhoon-f4-flight-controller\" title=\"MotoLab F4 Flight Controller\" target=\"_blank\"\u003eMotoLab Typhoon F4 Flight Controller\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/motolab-typhoon-vtx\" title=\"MotoLab Typhoon VTX\" target=\"_blank\"\u003eMotoLab Typhoon VTX\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"background-color: #ffffe0; color: black; border: 1px solid #BDB76B;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eREGULATORY NOTICE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003e\u003c\/strong\u003eThe use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a \"HAM\" amateur radio license. \u003ca href=\"http:\/\/wireless.fcc.gov\/services\/index.htm?job=licensing\u0026amp;id=amateur\" target=\"_blank\"\u003eLearn more about HAM licenses\u003c\/a\u003e, and \u003ca href=\"http:\/\/www.arrl.org\/find-an-amateur-radio-license-exam-session\" target=\"_blank\"\u003efind a HAM license exam session in your area\u003c\/a\u003e. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Defiance RC, Inc cannot be held responsible for your actions if you purchase and\/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Motolab","offers":[{"title":"Default Title","offer_id":39495574156,"sku":"","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/MotoLab_Typhoon_F4_Flight_Controller_VTX_Combo_0.jpg?v=1658199158"},{"product_id":"motolab-tempest-f4-flight-controller","title":"MotoLab Tempest F4 Flight Controller","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003eMotoLab Tempest F4 Flight Controller\u003cbr\u003e\u003c\/b\u003e\u003c\/strong\u003e\u003cspan\u003eMotoLab has released the latest version of their popular Tempest Flight Controller.  With a built in 100+A PDB, current sensor, Betaflight OSD, LC filters, and the STM32F4 MCU, this flight controller should be on every fpv pilot's list.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e168MHz STM32F4 version of Tempest\u003c\/li\u003e\n\u003cli\u003e100+A PDB with motor current sensor\u003c\/li\u003e\n\u003cli\u003eMPU6000 gyro\/acc on SPI bus\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD\u003c\/li\u003e\n\u003cli\u003eMicro SD slot with DMA support\u003c\/li\u003e\n\u003cli\u003eUp to 5 serial ports plus USB\u003c\/li\u003e\n\u003cli\u003eUp to 6 Dshot motor outputs\u003c\/li\u003e\n\u003cli\u003eSerial inverters for SBUS and S.PORT\u003c\/li\u003e\n\u003cli\u003e1.5A 5V regulator with LC filtered 5V for OSD and camera\u003c\/li\u003e\n\u003cli\u003ePlug-in direct connection to VTX and Camera with custom cables\u003c\/li\u003e\n\u003cli\u003eBuzzer and serial LED outputs\u003c\/li\u003e\n\u003cli\u003e38x40mm board size with 30.5mm mounting hole spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThe Tempest F4 is compatible with Betaflight using the new MLTEMPESTF4 board target.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x MotoLab Tempest F4 Flight Controller\u003c\/span\u003e\u003c\/p\u003e","brand":"Motolab","offers":[{"title":"Default Title","offer_id":43366210252,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/MotoLab_Tempest_F4_Flight_Controller_4.jpg?v=1658199346"},{"product_id":"helio-rc-spring-imu-f-flight-controller","title":"Helio RC Spring IMU-F Flight Controller","description":"\u003cp\u003eOne of the first flight controllers that ships with Butterflight, the Spring IMU-F is packed with the latest technologies.  Run all the latest features of Butterflight or Betaflight, even 32khz processing without overclocking.\u003c\/p\u003e\n\u003cp\u003eIntroducing IMU-F\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA gyroscope that is filtered using advanced statistical methods to smooth noise trends. Instead of sending gyro measurements to the f4 it sends quaternion (a fancy math term it tells the flight code the orientation)\u003c\/li\u003e\n\u003cli\u003eNever before seen IMU-f system an advanced inline discrete filtered gyro that is transparent to the flight controller\u003c\/li\u003e\n\u003cli\u003eWith a super clean discrete filtered gyro, more processing power is available for flight controller logic and future feature updates without causing slowdown or issues during flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTruly Freeing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupported by multiple open source flight controller software including ButterFlight’s 3.3+ most current technologies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNatively Fast\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTrue 32khz processing without overclocking\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHelio Gyro\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe hardware contains both an f3 (IMU-F) and an f4. The gyro is a IMU 20601.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/HELIO_SPRING_Flight_Controller_Anschlussplan_Wiringplan.jpg?5011568741142188398\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/HELIO_SPRING_Flight_Controller_Anschlussplan_Wiringplan_1024x1024.jpg?v=1523591857\" alt=\"Helio RC Spring Diagram\"\u003e\u003c\/a\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/wRvPW6YM_Z4\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessors:\u003c\/strong\u003e F4 \u0026amp; F3, STM32F405 \u0026amp; STM32F301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU:\u003c\/strong\u003e  ICM 20601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD\u003c\/strong\u003e: Full Betaflight OSD support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Outputs:\u003c\/strong\u003e Full DSHOT and MULTISHOT support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT,  SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Ports: \u003c\/strong\u003e5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort telemetry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Voltage sensing up to 26V, current and RSSI inputs (3.3V max).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst. Or 5v in (switchable with jumper pads)\u003c\/li\u003e\n\u003cli\u003e100% free of Jenova DNA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Helio RC Spring IMU-F Flight Controller\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.heliorc.com\/wiring\/\" target=\"_blank\"\u003eDownloads and Diagrams\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.heliorc.com\/docs\/\" target=\"_blank\"\u003eDocumentation\u003c\/a\u003e\u003c\/p\u003e","brand":"Helio RC","offers":[{"title":"Default Title","offer_id":8110063059052,"sku":"","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Helio_RC_Spring_IMU_F_Flight_Controller_2.jpg?v=1653427804"},{"product_id":"foxeer-f405-aio-betaflight-flight-controller","title":"FOXEER F405 AIO BetaFlight Flight Controller","description":"Foxeer's all new F4 based flight controller features support for all the latest that Betaflight offers, including built-in camera control as well as plenty of UARTs(5) and a PDB.  All in all, a great product.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20180627042504_78632.jpg?v=1531443076\" alt=\"Foxeer F405 AIO\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20180627042616_47874.jpg?v=1531443084\" alt=\"FOXEER F405 AIO BetaFlight Flight Controller\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20180627042522_75488.jpg?v=1531443081\" alt=\"FOXEER F405 AIO BetaFlight Flight Controller\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20180627042641_55276.jpg?v=1531443087\" alt=\"FOXEER F405 AIO BetaFlight Flight Controller\"\u003e","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":12213225324652,"sku":"","price":39.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/FOXEER_F405_AIO_BetaFlight_Flight_Controller_8.jpg?v=1658199861"},{"product_id":"foxeer-f722-dual-flight-controller","title":"Foxeer F722 Dual Flight Controller","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/foxeer-f722-v2-fpv-flight-controller\" target=\"_blank\" title=\"Foxeer F722 V2 Flight Controller\" rel=\"noopener noreferrer\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFoxeer's latest flight controller features the powerful \u003cspan\u003eSTM32F722 MCU along with both MPU6000 and ICM20602 gyros to provide the smoothest flight experience possible.  This allows you to run all the features available in Betaflight without compromise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20181109031506_69316.jpg?v=1542873606\" alt=\"Foxeer F722 Dual Flight Controller\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20181109031531_45174.jpg?v=1542873631\" alt=\"Foxeer F722 Dual Flight Controller\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20181109031555_26853.jpg?v=1542873650\" alt=\"Foxeer F722 Dual Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 36*36mm φ4mm\u003c\/li\u003e\n\u003cli\u003eHole to Hole: 30.5*30.5 φ4mm\u003c\/li\u003e\n\u003cli\u003eProcessor: STM32F722RGT6\u003c\/li\u003e\n\u003cli\u003eDual Gyro: MPU6000 and ICM20602 (32K)\u003c\/li\u003e\n\u003cli\u003eMemory: 16MB\u003c\/li\u003e\n\u003cli\u003eVoltage regulator: 5V\/2A 9V\/1.5A\u003c\/li\u003e\n\u003cli\u003eOSD Superposition: support\u003c\/li\u003e\n\u003cli\u003eInput: 3-6S (10-30V)\u003c\/li\u003e\n\u003cli\u003eFirmware: FOXEERF722DUAL\u003c\/li\u003e\n\u003cli\u003eUart: 5 ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Foxeer F722 Dual Flight Controller\u003c\/p\u003e","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":18282344742981,"sku":"","price":39.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Foxeer_F722_Dual_Flight_Controller_5.jpg?v=1658200235"},{"product_id":"strix-binary-f10-flight-controller-powered-by-heliorc","title":"STRIX Binary F10 Flight Controller Powered by HelioRC","description":"\u003cp\u003e\u003cspan\u003eBring your multirotor into the future with the STRIX Binary F10 flight controller powered by Helio RC!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eBinary = Two Processors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF7 + F3 = F10!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nnPefQ4EZrA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon’t settle with trying to overclock your F4 to use the latest features, or struggle with hitting the hardware limits of your current flight controller. Use the flight controller that can support not only all of today's functionality without any overclocking, but are also capable of features still under development that the F4 processors can’t even dream of performing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet the best gyro performance possible powered by the Helio IMU-F system, utilizing the ICM-20601 gyro and an F3 processor working together to make your flights smooth like butter.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLooks like your old F3 and F4 flight controllers are going to be going extinct like the dodo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhy should the STRIX Binary F10 be your new flight controller for freestyle and racing?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMost powerful hobby flight controller in the world. Period.\u003c\/li\u003e\n\u003cli\u003eCan operate at 32khz pid-loop speeds without overclocking (F4 requires overclocking).\u003c\/li\u003e\n\u003cli\u003eF7 stock clock speed is 216MHz vs 168MHz for F4 processors.\u003c\/li\u003e\n\u003cli\u003eTake full advantage of the processing power with Butterflight.\u003c\/li\u003e\n\u003cli\u003eToday's F7 boards are currently struggling to compete with F4's.  Not only does the STRIX Binary F10 outperform all F4's and F7’s on the market today, but it even outclasses the current Helio F3+F4 boards!\u003c\/li\u003e\n\u003cli\u003eOther F7's use the ICM-20602 gyro and don’t perform as well as the ICM-20601 gyro used on the Binary.\u003c\/li\u003e\n\u003cli\u003eBecause it’s awesome, and you’re awesome, so it’s a match made in heaven.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eFeatures in common with the Helio Spring boards:\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo jumpers required!\u003c\/li\u003e\n\u003cli\u003eInductor is on top to account for faulty ESCs emitting substantial EMI.\u003c\/li\u003e\n\u003cli\u003eLC filter on the OSD line.\u003c\/li\u003e\n\u003cli\u003eFiltered camera power.\u003c\/li\u003e\n\u003cli\u003eTruly Freeing and Natively Fast.\u003c\/li\u003e\n\u003cli\u003eRuns multiple multiple open source flight controller firmwares including the latest Butterflight, Betaflight, iNav, and others.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eHelio's IMU-F\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Helio IMU-F system is an advanced inline discretely filtered gyro system that is transparent to the flight controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe gyro data is processed before the F7 even sees it, filtering out the noise and unnecessary data and giving the F7 clean, accurate data to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMore processing power is available for flight controller logic and future feature updates without causing slowdown or other issues during flight since all the initial gyro filtering is being performed by the dedicated F3 processor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNew FU mode brings even more advanced filtering and even better buttery smooth flight!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConfigure the Binary F10 in\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/heliorc\/pegasus-ui\/releases\"\u003eButterflight\u003c\/a\u003e\u003ca href=\"https:\/\/github.com\/heliorc\/pegasus-ui\/releases\"\u003e\u003cbr\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBetaFlight - Coming soon!\u003c\/li\u003e\n\u003cli\u003eRF1 - Coming soon!\u003c\/li\u003e\n\u003cli\u003eiNav - Coming soon!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessors: F7 \u0026amp; F3, STM32F722 \u0026amp; STM32F301\u003c\/li\u003e\n\u003cli\u003eGyro: ICM 20601\u003c\/li\u003e\n\u003cli\u003eIMU: F3 Processor plus the ICM 20601 Gyro\u003c\/li\u003e\n\u003cli\u003eOSD: Full Betaflight OSD support\u003c\/li\u003e\n\u003cli\u003eMotor Outputs: Full DSHOT, ProShot, and MULTISHOT support.\u003c\/li\u003e\n\u003cli\u003eReceiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver.\u003c\/li\u003e\n\u003cli\u003eTelemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.\u003c\/li\u003e\n\u003cli\u003eSerial Ports: 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort telemetry.\u003c\/li\u003e\n\u003cli\u003eBuzzer Port: Dedicated port for 5V (100mA max) buzzers.\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs: Voltage sensing up to 26V, current and RSSI inputs (3.3V max).\u003c\/li\u003e\n\u003cli\u003ePower: VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst. Or 5v in (switchable with jumper pads)\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x36mm (40x36mm including motor tabs)\u003c\/li\u003e\n\u003cli\u003eMounting holes: Standard 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eGummies\/Grommets: 4x Purple (Red Pictured).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x STRIX Binary F10 Flight Controller\u003cbr\u003e4x Grommets\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Helio RC","offers":[{"title":"Default Title","offer_id":18795338432581,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/STRIX_Binary_F10_Flight_Controller_Powered_by_HelioRC_5.jpg?v=1658202133"},{"product_id":"brainfpv-radix-f4-flight-controller-gosd-custom-graphical-osd-baro-stackable-betaflight","title":"BrainFPV Radix F4 Flight Controller","description":"\u003cp\u003eBrainFPV is proud to introduce RADIX, the smartest, most innovative line of drone electronics BrainFPV has ever developed.\u003c\/p\u003e\n\u003cp\u003eThe RADIX flight controller has an integrated graphical OSD that you can add your own logos to, and has features like a built-in barometer, a microSD card slot for logging, a sexy form factor, vibration isolation, and also a camera control pad. If you like separate ESCs, you can stack it on the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-power-board\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRadix Power Board\u003c\/a\u003e or \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-wing-power-board\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRadix Wing Power Board\u003c\/a\u003e, both which can handle ridiculous amounts of power (up to 8S and 160A!) and even has integrated programmable LEDs! Or if you are into more compact and lightweight racing builds, you can stack the RADIX fc onto a 4-in-1 ESC! Naturally, they've included all the cables needed for a hassle free plug-and-play experience! Boom, now go fly your heart out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated graphical OSD featuring stick overlays, gyro spectrographs, artificial horizons, and more\u003c\/li\u003e\n\u003cli\u003eForm factor optimized for easy soldering and repair work\u003c\/li\u003e\n\u003cli\u003eSTM32 F4 processor running at 180MHz\u003c\/li\u003e\n\u003cli\u003eBetter sensors - Bosch BMI160 gyro (pilots are raving about it)\u003c\/li\u003e\n\u003cli\u003eIntegrated barometer - so you always know how high you are \u003c\/li\u003e\n\u003cli\u003eMicroSD card slot for logging\u003c\/li\u003e\n\u003cli\u003e6 motor outputs with support for DHSOT (150\/300\/600\/1200) and OneShot\u003c\/li\u003e\n\u003cli\u003eFour UARTS = more ports the better! Two of them feature signal inverters for S.Bus and SmartPort, allowing for a flawless setup!\u003c\/li\u003e\n\u003cli\u003eIntegrated silicone grommets for vibration isolation\u003c\/li\u003e\n\u003cli\u003eDedicated camera control pad for changing camera settings\u003c\/li\u003e\n\u003cli\u003eDedicated RGB LED output for programmable LEDs\u003c\/li\u003e\n\u003cli\u003eEngineered and tested in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003c\/li\u003e\n\u003cli\u003eIMU: Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.\u003c\/li\u003e\n\u003cli\u003eBaro: Bosch Sensortec BMP280 connected using SPI.\u003c\/li\u003e\n\u003cli\u003eOSD: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features.\u003c\/li\u003e\n\u003cli\u003eTelemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.\u003c\/li\u003e\n\u003cli\u003eSerial Ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. \u003c\/li\u003e\n\u003cli\u003eReceiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for a receiver.\u003c\/li\u003e\n\u003cli\u003eMotor Outputs: 6 outputs with full DSHOT (150\/300\/600\/1200) and OneShot support.\u003c\/li\u003e\n\u003cli\u003eIR Emitter: Dedicated output for infrared-based lap timing with multi-protocol support (I-Lap, Trackmate). Needs external IR LED and driver.\u003c\/li\u003e\n\u003cli\u003eBuzzer Port: Dedicated port for 5V (100mA max) buzzers.\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs: Voltage sensing up to 35V, current and RSSI inputs (3.3V max).\u003c\/li\u003e\n\u003cli\u003ePower: 4.5V to 5.5V, 120mA.\u003c\/li\u003e\n\u003cli\u003eDimensions: 37mm x 37mm, 30.5mm hole spacing. 4.1mm holes for anti-vibration grommets.\u003c\/li\u003e\n\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x BrainFPV Radix Flight Controller\u003cbr\u003e4x Isolation Grommets\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/osdlogo\/defiancerc\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Custom Defiance RC OSD Logo\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/knowledgebase\/radix-hardware-manual\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":19547438186565,"sku":"","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-F4-Flight-Controller-6.jpg?v=1707775982"},{"product_id":"brainfpv-radix-power-board","title":"BrainFPV Radix Power Board","description":"\u003cp\u003e\u003cspan\u003eSupporting up to \u003c\/span\u003e\u003cb\u003e8S \u003c\/b\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cb\u003e160A\u003c\/b\u003e\u003cspan\u003e, the \u003c\/span\u003e\u003cb\u003eradix pb\u003c\/b\u003e\u003cspan\u003e (power board) can handle serious power. The integrated LC filter and 5V (2A) regulator provide noise reduction and clean power to the \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-f4-flight-controller-gosd-custom-graphical-osd-baro-stackable-betaflight\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eradix fc\u003c\/a\u003e \u003c\/b\u003e\u003cspan\u003eand other peripherals. Get the cleanest sexiest build by soldering the motor and ESC telemetry signals directly to the \u003c\/span\u003e\u003cb\u003eradix pb,\u003c\/b\u003e\u003cb\u003e \u003c\/b\u003e\u003cspan\u003eand connecting it to the \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-f4-flight-controller-gosd-custom-graphical-osd-baro-stackable-betaflight\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eradix fc\u003c\/a\u003e\u003c\/b\u003e\u003cspan\u003e using the included cable. Oh yeah, did we mention there are four integrated programmable LED’s?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for major power: Up to 8S support and 160A burst\u003c\/li\u003e\n\u003cli\u003eIntegrated LC filter for noise reduction and clean video\u003c\/li\u003e\n\u003cli\u003eSolder pads for motor signal wires and ESC telemetry\u003c\/li\u003e\n\u003cli\u003eFour integrated programmable RGB LEDs - show your color\u003c\/li\u003e\n\u003cli\u003e5V (2A) output to power all your peripherals\u003c\/li\u003e\n\u003cli\u003eCurrent measurement up to 160A\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 4-layer PCB with 4oz copper per layer for high current handling ability\u003c\/li\u003e\n\u003cli\u003ePlug-and-play stacking with RADIX FC using soft wires for vibration isolation\u003c\/li\u003e\n\u003cli\u003eEngineered and tested in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x BrainFPV Radix PB \u003cbr\u003e1x Cable\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/kb\/radix\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":19548441280581,"sku":"","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-Power-Board-4.jpg?v=1707775974"},{"product_id":"brainfpv-radix-wing-power-board","title":"BrainFPV Radix Wing Power Board","description":"\u003cp\u003e\u003cspan\u003eGET YOUR WING ON! Use the \u003c\/span\u003e\u003cstrong\u003eradix wpb \u003c\/strong\u003e\u003cspan\u003e(wing power board) and combine it with the \u003cb\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-f4-flight-controller-gosd-custom-graphical-osd-baro-stackable-betaflight\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eradix fc\u003c\/a\u003e\u003c\/b\u003e for a simple and clean fixed-wing solution. Servos can be directly connected to the radix wpb and the integrated 5V 2A (3A burst) voltage regulator can optionally power them as well. Of course also the wpb can handle serious power, supporting \u003c\/span\u003e\u003cstrong\u003e8S \u003c\/strong\u003e\u003cspan\u003e and up to \u003c\/span\u003e\u003cstrong\u003e160A\u003c\/strong\u003e\u003cspan\u003eburst current. An integrated filter makes sure that you always have clean video and the current sensor provides accurate current measurement so you don't run out of battery on top of a mountain!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery Voltage: 3S to 8S (9V to 35V)\u003c\/li\u003e\n\u003cli\u003eMaximum Current: 100A constant, 160A burst.\u003c\/li\u003e\n\u003cli\u003eVoltage Regulator: Integrated 5V, 2A, 3A burst. By default, servos are powered by the ESC. The WPB has a jumper to enable powering small servos.\u003c\/li\u003e\n\u003cli\u003eNoise Filter: Integrated filter for clean video.\u003c\/li\u003e\n\u003cli\u003eCurrent Measurement: Up to 160A (20mV\/A).\u003c\/li\u003e\n\u003cli\u003eESC Output: Output for ESC on servo headers.\u003c\/li\u003e\n\u003cli\u003eServo Outputs: Outputs for up to 3 servos on headers (RADIX FC has pads for 2 additional servos).\u003c\/li\u003e\n\u003cli\u003eLEDs: Output for programmable RGB  LEDs.\u003c\/li\u003e\n\u003cli\u003eStacking height: 5.5mm (space between RADIX FC and RADIX WPB).\u003c\/li\u003e\n\u003cli\u003ePCB: 4 layer, 3oz (105um) copper per layer. HASL plating (lead-free).\u003c\/li\u003e\n\u003cli\u003eDimensions: 36mm x 39mm.\u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x BrainFPV Radix Wing Power Board\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/kb\/radix\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix Documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":19548446752837,"sku":"","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-Wing-Power-Board-5.png?v=1707776005"},{"product_id":"brainfpv-radix-li-20mm-x-20mm-flight-controller","title":"BrainFPV Radix LI 20mm x 20mm Flight Controller","description":"\u003cp\u003eThe BrainFPV Radix LI is the world's first 20mm x 20mm flight controller with a graphical OSD.  \u003cspan\u003eOn top of the normal Betaflight OSD, \u003c\/span\u003e\u003cstrong\u003eRADIX LI\u003c\/strong\u003e\u003cspan\u003e on-screen-display gives you extra features you can't get anywhere else. Proudly show off your pilot and team logo using the \u003c\/span\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/logo-customizer\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003elogo customizer\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e with just a click of a button. Extra features also include a graphical barometer scale, artificial horizon, gyro spectrograph, RC stick display, 3D OSD support and more!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/xosd_spectrpgraph_full_edited_large.png?v=1557421043\" alt=\"Radix Graphical OSD\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/xosd_hd_frame_full_edited_wSticks_large.png?v=1557421038\" alt=\"Radix Graphical OSD\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to the original Radix, the LI is smaller, has a built-in regulator so it can be powered directly from 3s-6s power, and has had the barometer and sd card slot removed.  It still features the only flight controller that uses the \u003cspan\u003eBosch Sensortec BMI160 gyro, which has proven to perform better than gyros used in other flight controllers.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv id=\"pgc-11150-9-0\" class=\"panel-grid-cell\"\u003e\n\u003cdiv id=\"panel-11150-9-0-0\" class=\"so-panel widget widget_sow-editor panel-first-child\" data-index=\"13\"\u003e\n\u003cdiv class=\"so-widget-sow-editor so-widget-sow-editor-base\"\u003e\n\u003cdiv class=\"siteorigin-widget-tinymce textwidget\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features. Support for side-by-side 3D when used with a 3D FPV camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Outputs:\u003c\/strong\u003e 6 outputs with full DSHOT (150\/300\/600\/1200) and OneShot support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT,  SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Ports: \u003c\/strong\u003e4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled\/disabled for maximum flexibility. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LEDs:\u003c\/strong\u003e Dedicated RGB LED output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Control:\u003c\/strong\u003e Dedicated output for accessing the camera menu to change camera settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Voltage sensing  (VBAT), current input (3.3V max).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 3S - 6S (7.5V - 26V), 500mA BEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 26.5mm x 26.5mm, 20mm hole spacing. 4.1mm holes for anti-vibration grommets for M3 screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x RADIX LI flight controller\u003cbr\u003e4x Silicone anti-vibration grommets\u003cbr\u003e1x BrainFPV 4-in-1 ESC cable kit\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/osdlogo\/defiancerc\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Custom Defiance RC OSD Logo\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/kb\/radix-li\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV Radix LI Documentation\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":19643060584517,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-LI-20mm-x-20mm-Flight-Controller-8.jpg?v=1707775987"},{"product_id":"holybro-kakute-f7-hdv-tekko-32-f3-4-in-1-40a-esc-stack","title":"Holybro Kakute F7 HDV and Tekko 32 F3 4-in-1 40A ESC Stack","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-kakute-f7-v1-5-and-tekko32-f3-4in1-45a-esc-stack\" target=\"_blank\" title=\"Holybro Kakute F7 HDV and Tekko32 F3 Stack\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - New Version Here **\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis stack works great for all manner of multi-rotor builds but is especially suited for those using the new DJI Digital FPV System.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/IMG_9560.jpg?v=1566876082\" alt=\"Holybro Kakute F7 HDV and DJI Digital FPV System\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20071KAKUTE-F7-HDVTekko32-F3-HDV-4in1-40A-ESC-COMBO_-P3.jpg?v=1566875164\" alt=\"Holybro Kakute F7 HDV + Tekko 32 F3 4-In-1 40A ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV\u003c\/strong\u003e\u003cbr\u003eHolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect HolyBro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/IMG_9339.jpg?v=1566875244\" alt=\"Holybro Kakute F7 HDV Flight Controller\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight, Butterflight, and Cleanflight.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTekko 32 F3 4-In-1 40AMP ESC\u003cbr\u003e\u003c\/strong\u003eAn all new BLHELI32 4-in-1 ESC with F3 MCU for smoother control and faster response rate. Supports up to 55A burst and 40A continuous.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/31023-TEKKO32-F3-4in1-40A-ESC-1.jpg?v=1566875277\" alt=\"Holybro Tekko 32 F3 4-In-1 40A ESC\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO BEC\u003c\/li\u003e\n\u003cli\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eMounting holes 30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eF3 MCU, runs double faster than F051\u003c\/li\u003e\n\u003cli\u003eExtra Cap needed for high current or 6s usage\u003c\/li\u003e\n\u003cli\u003eDimensions: 44x37x6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePinout:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/47090d51c4.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/47090d51c4.jpg?v=1566875308\" alt=\"Holybro Tekko 32 F3 4-In-1 40A ESC Pinout\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes\u003c\/b\u003e:\u003cbr\u003e\u003cspan\u003e1x KAKUTE F7 HDV\u003cbr\u003e1x Tekko32F3 4in1 40A ESC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Electrolytic capacitor: 1000uF 35v\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_Manual.pdf\"\u003eHolybro Kakute F7 HDV Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":29462053519429,"sku":"","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_and_Tekko_32_F3_4_in_1_40A_ESC_Stack_4.jpg?v=1658198987"},{"product_id":"holybro-kakute-f7-v1-5-flight-controller","title":"Holybro Kakute F7 V1.5 Flight Controller","description":"\u003cp\u003e\u003cspan\u003eThe Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates a flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eV1.5 - IMU updated to MPU6000, re-designed and more reliable dampening structure\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight.\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\n\u003cli\u003eSoft-mounting built-in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Approximately 130 amps maximum measurable value\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x41x7mm (includes foam-mounted gyro board in height)\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 V1.5 Flight Controller\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e1x JST SH 8pin 150mm cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eManual\u003c\/strong\u003e:\u003cbr\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_V1.5_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHolybro_Kakute_F7_V1.5_Manual.pdf\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePX4 stack support:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/docs.px4.io\/master\/en\/flight_controller\/kakutef7.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/docs.px4.io\/master\/en\/flight_controller\/kakutef7.html\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArdupilot stack support:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/ArduPilot\/ardupilot\/blob\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/KakuteF7\/README.md\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/github.com\/ArduPilot\/ardupilot\/blob\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/KakuteF7\/README.md\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":30270442274885,"sku":"","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_V1_5_Flight_Controller_5.jpg?v=1658199722"},{"product_id":"holybro-kakute-f7-aio-v1-5","title":"Holybro Kakute F7 AIO Flight Controller","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/holybro-kakute-f7-aio-v1-5-flight-controller\" target=\"_blank\" title=\"Holybro Kakute F7 AIO V1.5 Flight Controller\" rel=\"noopener noreferrer\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Holybro Kakute F7 All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSupports Betaflight, Butterflight, and Cleanflight.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSoft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz sampling rate.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDedicated bootloader button for easy firmware flashing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow-profile design fits into even very compact frames.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly from the battery power lead.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMCU: STM32F745 32-bit processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIMU: ICM20689 (SPI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarometer: BMP280\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCurrent Sensor: Approximately 130 amps maximum measurable value\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTF card for Blackbox logging\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 35x48x7mm (includes foam-mounted gyro board in height)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 11g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 AIO v1.3\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":30270459576389,"sku":"","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_AIO_Flight_Controller_6.jpg?v=1658202153"},{"product_id":"holybro-kakute-f7-hdv-flight-controller","title":"Holybro Kakute F7 HDV Flight Controller","description":"\u003cp\u003e\u003cspan\u003eHolyBro Kakute F7 HDV is designed to work with the high definition DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect HolyBro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/e9fac06f63.jpg?v=1569896246\" alt=\"Holybro Kakute F7 HDV\"\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSupports Betaflight.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDedicated bootloader button for easy firmware flashing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow-profile design fits into even very compact frames.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMCU: STM32F745 32-bit processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIMU:MPU6000\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarometer: BMP280\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTF card for Blackbox logging\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 35x35mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 8g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Holybro Kakute F7 HDV Flight Controller\u003cbr\u003e4x M3 Damping Balls\u003cbr\u003e1x JST SH 8pin 150mm cable\u003cbr\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eManual\u003c\/strong\u003e:\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_Manual.pdf\"\u003e\u003cspan\u003eHolybro Kakute F7 HDV Manual\u003c\/span\u003e\u003c\/a\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":30270468784197,"sku":"","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_Flight_Controller_6.jpg?v=1658201927"},{"product_id":"brainfpv-radix-li-wing-power-board","title":"BrainFPV Radix LI Wing Power Board","description":"\u003cp\u003eThe RADIX LI Wing Power Board is a companion to the 20x20\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-li-20mm-x-20mm-flight-controller\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRADIX LI Flight Controller\u003c\/a\u003e.  Together they form the world's smallest flight control system for RC airplanes and wings, with an integrated GRAPHICAL OSD (on-screen display)!\u003c\/p\u003e\n\u003cdiv id=\"pgc-15577-1-0\" class=\"panel-grid-cell\"\u003e\n\u003cdiv id=\"panel-15577-1-0-0\" class=\"so-panel widget widget_sow-editor panel-first-child panel-last-child\" data-index=\"1\"\u003e\n\u003cdiv class=\"so-widget-sow-editor so-widget-sow-editor-base\"\u003e\n\u003cdiv class=\"siteorigin-widget-tinymce textwidget\"\u003e\n\u003cp\u003eMake sure to read the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/knowledgebase\/radix-li-wing-kit\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRADIX LI Wing Kit manual\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto learn how to use it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"pg-15577-3\" class=\"panel-grid panel-no-style\"\u003e\n\u003cdiv class=\"so-widget-sow-editor so-widget-sow-editor-base\"\u003e\n\u003cdiv class=\"siteorigin-widget-tinymce textwidget\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3S to 5S (8V to 22V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e40A constant, 60A burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Regulator:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIntegrated 5V, 3A regulator. By default, servos are powered by the ESC. The wPB has a jumper to enable powering small servos\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5V, 1A  filtered output for clean video (1A is shared with 5V \/ 3A regulator)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Measurement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUp to 65A (50 mV\/A, current scale: 500)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eESC Output:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eOutput for 1 x ESC on servo headers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eServo Outputs: \u003c\/b\u003eOutputs for up to 5 servos on headers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLEDs: \u003c\/b\u003eOutput for programmable RGB LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStacking height\u003c\/strong\u003e: 5.5mm (space between RADIX LI FC and RADIX LI wPB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCB:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4 layer, 3oz (105um) copper per layer. HASL plating (lead-free)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e26.5 mm x 34 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x RADIX LI Wing Power Board\u003cbr\u003e1x 10-pin cable for connection to RADIX LI Flight Controller\u003cbr\u003e1x Servo headers: straight and angled\u003cbr\u003e1x 25V \/ 470uF capacitor\u003cbr\u003e1x Wire for connecting outputs 5 and 6\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":30289131667525,"sku":"","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-LI-Wing-Power-Board-2.png?v=1707776000"},{"product_id":"brainfpv-radix-li-wing-kit","title":"BrainFPV Radix LI Wing Kit","description":"\u003cp\u003eThe RADIX LI Wing Kit is a complete fixed wing flight control system consisting of the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-li-20mm-x-20mm-flight-controller\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRADIX LI Flight Controller\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-li-wing-power-board\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRADIX LI Wing Power Board (wPB)\u003c\/a\u003e, and the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-ublox-m8-gps-module\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBrainFPV GPS\u003c\/a\u003e. This is the smallest fixed-wing flight controller with a full graphical OSD available on the market!\u003c\/p\u003e\n\u003cp\u003eMake sure to read the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.brainfpv.com\/knowledgebase\/radix-li-wing-kit\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRADIX LI Wing Kit manual\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto learn how to use it!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eRadix LI Flight Controller\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features. Support for side-by-side 3D when used with a 3D FPV camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Outputs:\u003c\/strong\u003e 6 outputs with full DSHOT (150\/300\/600\/1200) and OneShot support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT,  SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Ports: \u003c\/strong\u003e4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled\/disabled for maximum flexibility. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LEDs:\u003c\/strong\u003e Dedicated RGB LED output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Control:\u003c\/strong\u003e Dedicated output for accessing the camera menu to change camera settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Voltage sensing  (VBAT), current input (3.3V max).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 3S - 6S (7.5V - 26V), 500mA BEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 26.5mm x 26.5mm, 20mm hole spacing. 4.1mm holes for anti-vibration grommets for M3 screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRadix LI Wing Power Board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3S to 5S (8V to 22V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e40A constant, 60A burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Regulator:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIntegrated 5V, 3A regulator. By default, servos are powered by the ESC. The wPB has a jumper to enable powering small servos\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5V, 1A  filtered output for clean video (1A is shared with 5V \/ 3A regulator)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Measurement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUp to 65A (50 mV\/A, current scale: 500)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eESC Output:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eOutput for 1 x ESC on servo headers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eServo Outputs: \u003c\/b\u003eOutputs for up to 5 servos on headers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLEDs: \u003c\/b\u003eOutput for programmable RGB LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStacking height\u003c\/strong\u003e: 5.5mm (space between RADIX LI FC and RADIX LI wPB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCB:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4 layer, 3oz (105um) copper per layer. HASL plating (lead-free)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e26.5 mm x 34 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrainFPV GPS:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses a genuine uBlox M8 GPS module with up to 18 Hz update rate\u003c\/li\u003e\n\u003cli\u003eSupports GPS and GLONASS\u003c\/li\u003e\n\u003cli\u003eSuperior noise filtering and large antenna ground plane for optimal signal reception\u003c\/li\u003e\n\u003cli\u003eIntegrated white LED’s to indicate GPS lock (blinks when lock is achieved)\u003c\/li\u003e\n\u003cli\u003eSuper capacitor based backup voltage supply. Unlike batteries commonly used, the super capacitor is charged in seconds and allows a fast warm start for several hours.\u003c\/li\u003e\n\u003cli\u003eComes in a white plastic enclosure with a BrainFPV logo on top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: 5 V, 70 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 31 mm x 31 mm x 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 13 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x BrainFPV Radix LI Flight Controller\u003cbr\u003e1x BrainFPV Radix LI Wing Power Board\u003cbr\u003e1x BrainFPV GPS Module\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":30289138450501,"sku":"","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-LI-Wing-Kit-8.png?v=1707775978"},{"product_id":"holybro-kakute-f7-hdv-aio-flight-controller","title":"Holybro Kakute F7 HDV AIO Flight Controller","description":"\u003cp\u003e\u003cspan\u003eHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTX module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIO to the DJI FPV VTx, for both signal and power supply.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/IMG_2270.jpg?v=1575086066\" alt=\"Holybro Kakute F7 HDV AIO Flight Controller\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV AIO monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x37mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 HDV AIO Flight Controller\u003cbr\u003e\u003cspan\u003e4x M3 Damping Balls\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_AIO_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKakute F7 HDV AIO Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104027885637,"sku":"","price":41.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_AIO_Flight_Controller_1.jpg?v=1658200381"},{"product_id":"holybro-kakute-f7-hdv-aio-tekko32-f3-35a-esc-combo","title":"Holybro Kakute F7 HDV AIO - Tekko32 F3 35A ESC Combo","description":"\u003cp\u003e\u003cspan\u003eHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIO to the DJI FPV VTx, for both signal and power supply. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Tekko32 F3 35A ESC uses an F3 MCU, with ws2812b LED and current sensor, supports BLHELI32 telemetry function.  Perfect combo.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV AIO\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV AIO monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x37mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTekko32 F3 35A ESC:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size\/low weight\u003c\/li\u003e\n\u003cli\u003eBuilt-in Current sensor\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/li\u003e\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot\u003c\/li\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eOn-Board RGB LED (WS2812B LED)\u003c\/li\u003e\n\u003cli\u003eAuto Timing Feature\u003c\/li\u003e\n\u003cli\u003eSmooth Response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input:3-6s LIPO\u003c\/li\u003e\n\u003cli\u003eCont.Current：35A\u003c\/li\u003e\n\u003cli\u003eSize：15*30*5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6g (1pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 HDV AIO Flight Controller\u003cbr\u003e\u003cspan\u003e4x M3 Damping Balls\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003cbr\u003e\u003c\/span\u003e4x Holybro Tekko32 F3 35A ESCs\u003cbr\u003e4x ESC Wire Sets\u003cbr\u003e4x Electrolytic Capacitors 220uF 35V\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_AIO_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKakute F7 HDV AIO Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104056033349,"sku":"","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_AIO_Tekko32_F3_35A_ESC_Combo_4.jpg?v=1658200852"},{"product_id":"holybro-kakute-f7-hdv-aio-tekko32-f3-metal-65a-esc-combo","title":"Holybro Kakute F7 HDV AIO - Tekko32 F3 Metal 65A ESC Combo","description":"\u003cp\u003e\u003cspan\u003eHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIO to the DJI FPV VTx, for both signal and power supply. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNew BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. Supports up to 80A burst and 65A continuous. (ESC mounted under props, without anything covering the ESC)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKakute F7 HDV AIO\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \/ low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV AIO monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU:MPU6000\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x37mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"oaimY _1ntuX\"\u003e\u003cstrong\u003eTekko32 F3 Metal 65A ESC Combo:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size\/low weight\u003c\/li\u003e\n\u003cli\u003eBuilt-in Current sensor\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/li\u003e\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot\u003c\/li\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eOn-Board RGB LED (WS2812B LED)\u003c\/li\u003e\n\u003cli\u003eAuto Timing Feature\u003c\/li\u003e\n\u003cli\u003eSmooth Response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz\u003c\/li\u003e\n\u003cli\u003eMosfet tested at 4S 65A, under props, nothing covered for 1min\u003c\/li\u003e\n\u003cli\u003e18 x 27 mm\u003c\/li\u003e\n\u003cli\u003eSupports Lipo 3-6S\u003c\/li\u003e\n\u003cli\u003eExt. cap needed for 6s (220uf 35v for 6s usage.)\u003c\/li\u003e\n\u003cli\u003eOnboard WS2812B LED\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4g (1pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 HDV AIO Flight Controller\u003cbr\u003e\u003cspan\u003e4x M3 Damping Balls\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST GHR 8pin to JST GHR 6pin 80mm cable\u003cbr\u003e\u003c\/span\u003e4x Holybro Tekko32 F3 Metal 65A ESCs\u003cbr\u003e4x ESC Wire Sets\u003cbr\u003e4x Electrolytic Capacitors 220uF 35V\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F7_HDV_AIO_Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKakute F7 HDV AIO Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31104077660229,"sku":"","price":131.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_HDV_AIO_Tekko32_F3_Metal_65A_ESC_Combo_9.jpg?v=1658200375"},{"product_id":"holybro-kakute-f7-aio-v1-5-flight-controller","title":"Holybro Kakute F7 AIO V1.5 Flight Controller","description":"\u003cstrong\u003e\u003c\/strong\u003eThe Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\n\u003cp\u003e\u003cstrong\u003eIMU updated to MPU6000, re-designed and more reliable damping structure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight, Butterflight.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\n\u003cli\u003eSoft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly from the battery power lead.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Approximately 130 amps maximum measurable value\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x48x7mm (includes foam-mounted gyro board in height)\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 11.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Holybro Kakute F7 AIO V1.5 Flight Controller\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31113674653765,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_AIO_V1_5_Flight_Controller_8.jpg?v=1658202116"},{"product_id":"zeez-design-f7-betaflight-flight-controller","title":"ZeeZ Design F7 Betaflight Flight Controller","description":"\u003cp\u003eZeez Design is a new outfit designing products for the FPV community.  Zeez Design project was born in Italy in early 2016 from FPV racing pilots and students of the Engineer University of Bologna that wanted to develop their own gear for racing drones. The ZeeZ F7 flight controller is their first product. \u003c\/p\u003e\n\u003cp\u003eThe ZeeZ F7 was designed for easy assembly with common VTX\/RX, resulting in clean, low profile stacks.  The FC fits perfectly on top of the ZeeZ Design 60Amp 4-In-1 ESC for clean wiring and ease of assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 8S input (max 36V)\u003c\/li\u003e\n\u003cli\u003e5V BEC up to 3A continuous\u003c\/li\u003e\n\u003cli\u003eSTM32F722 MCU\u003c\/li\u003e\n\u003cli\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e128MB OnBoard flash\u003c\/li\u003e\n\u003cli\u003eOSD chip Onboard\u003c\/li\u003e\n\u003cli\u003e6 available UARTS\u003c\/li\u003e\n\u003cli\u003eVTX switch to control the ON\/OFF of the VTX\u003c\/li\u003e\n\u003cli\u003edirectly from your transmitter\u003c\/li\u003e\n\u003cli\u003eLC Filter for 5V VTX\u003c\/li\u003e\n\u003cli\u003eUSB Type C connector\u003c\/li\u003e\n\u003cli\u003eOnboard RGB LED distribution for clean wiring to the LED on the arm of the quad.\u003c\/li\u003e\n\u003cli\u003eNotch design on sides and in the front of the – FC for better fitting on the frame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLED System Specifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZeez LED System includes 4 strips of RGB LED lights\u003c\/li\u003e\n\u003cli\u003e10 RBG LED Per Strip\u003c\/li\u003e\n\u003cli\u003eMax Current Draw (10 led on white colour): 0.6A @ 5V\u003c\/li\u003e\n\u003cli\u003eEasy wiring to Zeez F7 Flight controller and easy control with BetaFlight\u003c\/li\u003e\n\u003cli\u003eDimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Zeez F7 Flight Controller\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Aluminum Standoff\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Aluminum Nut\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x ESC to Flight Controller 8 Pin JST SH 1.00mm connector\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.00mm Header Pin for VTX connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.54mm Header Pin for Receiver connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x Spare M3 rubber anti-vibration for Flight Controller\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLED Combo includes 4x Zeez LED Strips\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/ZEEZ-F7-manual-v0.1.pdf\"\u003eUser Manual\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/betaflight_4.1.0_ZEEZF7.zip\"\u003eBetaFlight 4.1 Firmware\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/OSD_Logo2.png\"\u003eBetaflight OSD Custom Logo\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"FC + LED Combo","offer_id":31426768076869,"sku":"","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Flight Controller","offer_id":31426768044101,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_F7_Betaflight_Flight_Controller_7.jpg?v=1658203121"},{"product_id":"zeez-design-racing-combo-f7-fc-60a-bl32-esc","title":"ZeeZ Design Racing Combo - F7 FC + 60A BL32 ESC","description":"\u003cp\u003e\u003cspan\u003eZeez Design Racing Combo with the ZeeZ F7 Flight Controller, ZeeZ 60A 4-in-1 BLHeli_32 ESC, and ZeeZ LED System.  An amazing stack featuring one of the best F7 flight controllers with a powerful 60Amp BLHeli_32 ESC and 4 RGB LED Strips with 10 LEDs per strip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFlight Controller:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUp to 8S input (max 36V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5V BEC up to 3A continuous\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSTM32F722 MCU\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e128MB OnBoard flash\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSD chip Onboard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 available UARTS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVTX switch to control the ON\/OFF of the VTX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003edirectly from your transmitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLC Filter for 5V VTX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB Type C connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnboard RGB LED distribution for clean wiring to the LED on the arm of the quad.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNotch design on sides and in the front of the – FC for better fitting on the frame.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eESC:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eInput: 3S-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-quality Toshiba Mosfet: 60A continuous current draw \/90A peak current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware: BlHeli32 ZEEZ60A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAluminum HeatSink to cooldown the Mosfet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncluding 35V 470uF Low ESR Capacitor (and spare capacitor)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy wiring with connector included in package with Zeez F7 Flight Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBidirectional DSHOT capable for RMP filtering\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension: 37,50mm * 43mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eLED System:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eZeez Led System includes 4 strips of RGB led light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10 RBG Led on each strip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMax Current Draw (10 led on white color): 0.6A @ 5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy wiring to Zeez F7 Flight controller and easy control with BetaFlight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez F7 Flight Controller\u003cbr\u003e1x Zeez 60A 4in1 ESC\u003cbr\u003e1x Zeez Led System (4 LED Strips)\u003cbr\u003e4x Aluminum Standoff\u003cbr\u003e4x Aluminum Nut\u003cbr\u003e2x ESC to Flight Controller 8 Pin JST SH 1.00mm connector\u003cbr\u003e6x Led Strip to Flight Controller 3 pin JST SH 1.00mm connector\u003cbr\u003e2x 470uF 35V Low ESR Capacitor\u003cbr\u003e1x XT60 with 12AWG Silicon Cable for battery connection\u003cbr\u003e2x 2.00mm Header Pin for VTX connection\u003cbr\u003e2x 2.54mm Header Pin for Receiver connection\u003cbr\u003e2x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/ZEEZ-F7-manual-v0.1.pdf\"\u003eUser Manual\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/betaflight_4.1.0_ZEEZF7.zip\"\u003eBetaFlight 4.1 Firmware\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.zeezdesign.com\/wp-content\/uploads\/2019\/12\/OSD_Logo2.png\"\u003eBetaflight OSD Custom Logo\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31171264872517,"sku":"","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_Racing_Combo_F7_FC_60A_BL32_ESC_8.jpg?v=1658201414"},{"product_id":"fettec-kiss-f7-flight-controller","title":"FETtec KISS F7 Flight Controller","description":"\u003cp\u003eFETtec has produced a F7 based flight controller that runs KISS firmware.  Has a place to d\u003cspan\u003eirect solder your TBS \u003c\/span\u003e\u003cspan\u003eUnify Nano and Crossfire Nano Receiver.  Amazing product for those that love KISS firmware.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFETtec F7 FC\u003c\/li\u003e\n\u003cli\u003eKISS FC firmware\u003c\/li\u003e\n\u003cli\u003eDimensions 35x30mm without 30x30 corners\u003c\/li\u003e\n\u003cli\u003e20x20mm (with breakable holes M2 to M3)\u003c\/li\u003e\n\u003cli\u003eand 30x30mm hole distance useable (breakable 30x30mm corners)\u003c\/li\u003e\n\u003cli\u003eProzessor F7 [DShot 2400, Oneshot, Onewire]\u003c\/li\u003e\n\u003cli\u003ePlace for RX and VTX\u003c\/li\u003e\n\u003cli\u003ebuild-in real Pit-Mode for unify nano\u003c\/li\u003e\n\u003cli\u003eseperate onboard 5V BEC for VTX\u003c\/li\u003e\n\u003cli\u003e4 signal and gnd pads in each corner\u003c\/li\u003e\n\u003cli\u003e8 pin connector for solder free FETtec ESC connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e*Pin headers are not included. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Dimesions.png?v=1582995140\" alt=\"FETtec KISS Flight Controller Dimensions\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FETtec KISS Flight Controller\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fettec.net\/media\/pdf\/85\/ff\/21\/FETtec_FC_ManualuX82eFwCaMVUV.pdf\" target=\"_blank\" title=\"Download FETtec KISS FC Manual\" rel=\"noopener noreferrer\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/flyduino\/kiss-gui\/releases\" target=\"_blank\" title=\"KISS GUI\" rel=\"noopener noreferrer\"\u003eKISS GUI\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fettec.net\/media\/image\/67\/67\/1b\/FETtec_KISS_FC_F7_Flight-Controller_Anschlussplan_Wiringplan_Seidel.png\" target=\"_blank\" title=\"FETtec KISS Wiring Plan\" rel=\"noopener noreferrer\"\u003eFETtec KISS FC Wiring\u003c\/a\u003e\u003c\/p\u003e","brand":"FETtec","offers":[{"title":"Default Title","offer_id":31247198486597,"sku":"","price":71.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/FETtec_KISS_F7_Flight_Controller_9.jpg?v=1658199672"},{"product_id":"foxeer-f722-v2-fpv-flight-controller","title":"Foxeer F722 V2 FPV Flight Controller","description":"\u003cp\u003eThe F722 from Foxeer gets an update.  Features F7 MCU, \u003cspan\u003eMPU6000 gyro, and all-new design and layout for optimum performance and ease of build. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fcK5v92HXMk\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel:  F722 V2\u003c\/li\u003e\n\u003cli\u003eCPU:  \u003cspan\u003eSTM32F722RET6\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Supply:  \u003cspan\u003e3~6S Lipo (11V~30V)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBEC Output:  DC5V\/2A; DC9V\/2A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSD:  BF OSD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack Box:  16M Flash Memory\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUART:  5 Sets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eESC Telemetry:  RX4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuzzer:  YES\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmart Audio:  YES\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLED:  4 Set 2812 LED\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB:  Micro USB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware:  FOXEERF722V2(FOXE)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize:  37x33mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting Hole: 30.5x30.5mm,Φ4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight(g):  7.6g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorking Temperature:  -20℃ ~ +55℃\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorking Humidity:  20~95%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStorage Temperature:  -20℃ ~ +70℃\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200518202854_83955.jpg?v=1592532211\" alt=\"Foxeer F722 V2 Flight Controller\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200518202906_69937.jpg?v=1592532236\" alt=\"Foxeer F722 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200518202922_76400.jpg?v=1592532257\" alt=\"Foxeer F722 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200518202931_90185.jpg?v=1592532273\" alt=\"Foxeer F722 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Foxeer F722 V2 FPV Flight Controller\u003cbr\u003e4x Rubber Isolation Standoffs\u003c\/p\u003e","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":31659053711429,"sku":"","price":56.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Foxeer_F722_V2_FPV_Flight_Controller_5.jpg?v=1658202493"},{"product_id":"foxeer-f722-v2-mini-20x20-flight-controller","title":"Foxeer F722 V2 Mini 20x20 Flight Controller","description":"\u003cp\u003eFoxeer's F722 V2 flight controller in 20x20mm form.  Same fantastic quality and features, just smaller.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JrLKVTROaqI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel:  F722 V2 Mini\u003c\/li\u003e\n\u003cli\u003eCPU:  \u003cspan\u003eSTM32F722RET6\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Supply:  2~6S LiPo (6.5V~30V)\u003c\/li\u003e\n\u003cli\u003eBEC Output:  DC5V\/2A\u003c\/li\u003e\n\u003cli\u003eOSD:  BF OSD\u003c\/li\u003e\n\u003cli\u003eBlack Box:  16M Flash Memory\u003c\/li\u003e\n\u003cli\u003eUART:  4 Sets\u003c\/li\u003e\n\u003cli\u003eESC Telemetry:  RX4\u003c\/li\u003e\n\u003cli\u003eBuzzer:  YES\u003c\/li\u003e\n\u003cli\u003eSmartaudio:  YES\u003c\/li\u003e\n\u003cli\u003eLED:  4 Sets 2812 LED\u003c\/li\u003e\n\u003cli\u003eUSB:  Micro USB\u003c\/li\u003e\n\u003cli\u003eFirmware:  \u003cspan\u003eFOXEERF722V2(FOXE)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize:  26x26mm\u003c\/li\u003e\n\u003cli\u003eMounting Hole:  \u003cspan\u003e20X20mm,Φ4mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:  4g\u003c\/li\u003e\n\u003cli\u003eWorking Temperature:  -\u003cspan\u003e20℃ ~ +55℃\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking Humidity:  2\u003cspan\u003e0~95%\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStorage Temperature:  -20℃ ~ +70℃\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200616202816_28875.jpg?v=1594307293\" alt=\"Foxeer F722 V2 Mini Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200618050535_31800.jpg?v=1594307321\" alt=\"Foxeer F722 V2 Mini Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200616202834_30791.jpg?v=1594307336\" alt=\"Foxeer F722 V2 Mini Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/20200619013655_32229.jpg?v=1594307349\" alt=\"Foxeer F722 V2 Mini Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Foxeer F722 V2 Mini 20x20 Flight Controller\u003cbr\u003e4x Vibration Isolation Standoffs\u003c\/p\u003e","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":31709171253317,"sku":"","price":56.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Foxeer_F722_V2_Mini_20x20_Flight_Controller_2.jpg?v=1658199248"},{"product_id":"holybro-kakute-f7-v1-5-and-tekko32-f3-4in1-45a-esc-stack","title":"Holybro Kakute F7 V1.5 and Tekko32 F3 4in1 45A ESC Stack","description":"\u003cp\u003eThis stack features Holybro's Kakute F7 V1.5 flight controller and Tekko32 F3 45A 4-In-1 ESC. Both products are fantastic and work together beautifully.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKakute F7 V1.5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates a flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eV1.5 - IMU updated to MPU6000, re-designed and more reliable dampening structure\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Betaflight.\u003c\/li\u003e\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\n\u003cli\u003eSoft-mounting built-in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\n\u003cli\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer.\u003c\/li\u003e\n\u003cli\u003eReady for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\u003c\/li\u003e\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 monitors voltage directly from the power supply.\u003c\/li\u003e\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F745 32-bit processor\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Approximately 130 amps maximum measurable value\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART1,2,3,4,6,7)\u003c\/li\u003e\n\u003cli\u003eAll UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eTF card for Blackbox logging\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x41x7mm (includes foam-mounted gyro board in height)\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTekko32 45A 4-In-1 ESC\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe latest Tekko32 45A 4-In-1 ESC has got some improvements on its performance：\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced BEC, withstand voltage up to 80V.\u003c\/li\u003e\n\u003cli\u003eThe first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience.\u003c\/li\u003e\n\u003cli\u003eAmperage meter scale ratio has been adjusted to 185-195.\u003c\/li\u003e\n\u003cli\u003eThe mounting hole has been changed into M4 with anti-vibration silicone grommet Insert.\u003c\/li\u003e\n\u003cli\u003eThe PCB design uses a design in which the drive circuit and the control circuit are s\u003cspan\u003eeparated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\n\u003cli\u003ePWM input, TLM supported\u003c\/li\u003e\n\u003cli\u003eVoltage output (VBAT)\u003c\/li\u003e\n\u003cli\u003eNO BEC\u003c\/li\u003e\n\u003cli\u003eSupports oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\n\u003cli\u003eMounting holes 30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eSupports damped light\u003c\/li\u003e\n\u003cli\u003eF3 MCU, runs double faster than F051\u003c\/li\u003e\n\u003cli\u003eExtra Cap needed for high current or 6s usage\u003c\/li\u003e\n\u003cli\u003eDimensions: 44x37x6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Kakute F7 V1.5 +Tekko 32 F3 45A 4-In-1 ESC stack\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Electrolytic Capacitor: 1000uF 35v\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31709292462149,"sku":"","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_V1_5_and_Tekko32_F3_4in1_45A_ESC_Stack_7.jpg?v=1658203427"},{"product_id":"flightone-lightning-h7-500mhz-flight-controller","title":"Flightone Lightning H7 500mhz Flight Controller","description":"\u003cp\u003e\u003cspan\u003eH7 Processor up to 10x faster than F7. Vector OSD (that means very cool animations among other things)… Pit Switch built-in… Adjustable Camera\/VTX voltage… Fully DJI compatible…. Full-size soldering pads, with drilled holes for strength underneath connectors… Full connectors for easy plug and play, with RX\/VTX packages that come pre-soldered… Tons of storage for advanced AI, Logging, etc.. M2 \u0026amp; M3 Mounting..\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNeural Networking aka AI support, and features already being developed.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned internally by Flightone, being produced in both the United States and China!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you want all the features and speed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500mhz H7 Processor\u003c\/li\u003e\n\u003cli\u003eGraphical Vector OSD\u003c\/li\u003e\n\u003cli\u003eFree Replacement Plan\u003c\/li\u003e\n\u003cli\u003eFull AI Support\u003c\/li\u003e\n\u003cli\u003eHigh power voltage regulator\u003c\/li\u003e\n\u003cli\u003e4s-6s Lipo Battery Powered\u003c\/li\u003e\n\u003cli\u003eDJI FPV Support\u003c\/li\u003e\n\u003cli\u003eGPS Return to Home Support\u003c\/li\u003e\n\u003cli\u003e5v or VBAT Camera\/VTX Connection\u003c\/li\u003e\n\u003cli\u003eBuilt-in pit switch\u003c\/li\u003e\n\u003cli\u003e1Gb Flash for logging\/AI features\u003c\/li\u003e\n\u003cli\u003eEasy Connectors for All Devices\u003c\/li\u003e\n\u003cli\u003eStrong Solder Pads (reinforced with via)\u003c\/li\u003e\n\u003cli\u003e7 UART\/USARTS\u003c\/li\u003e\n\u003cli\u003e30.5mm x 30.5mm mounting\u003c\/li\u003e\n\u003cli\u003e20mm x 20mm mounting\u003c\/li\u003e\n\u003cli\u003eFull-Size Solder Pads Available\u003c\/li\u003e\n\u003cli\u003eCamera Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eAI Neural Networking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/brain_160x160.jpg?v=1595535883\" alt=\"Flightone H7 Flight Controller\" width=\"160x160\" height=\"160x160\" style=\"margin-right: 25px; float: left;\"\u003e\u003c\/div\u003e\n\u003cp\u003eUsing advanced AI techniques the new flight controller supports advanced AI and neural networking. From filters to tuning, we hope to move many processes to utilize Artificial Intelligence.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eGPS Return to Home\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/satellite_160x160.jpg?v=1595535962\" alt=\"Flightone H7 Flight Controller\" width=\"160x160\" height=\"160x160\" style=\"float: right;\"\u003e\u003c\/div\u003e\n\u003cp\u003eVia external GPS module, you can now have your drone automatically return to home. With just the flick of a switch, or on failsafe drone will return above your head, and circle till you land it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Vector Graphics OSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/hud-3778788_640_160x160.jpg?v=1595535979\" alt=\"Flightone H7 Flight Controller\" style=\"margin-right: 15px; float: left;\" width=\"160x160\" height=\"160x160\"\u003e\u003c\/div\u003e\n\u003cp\u003eMost advanced OSD design on a flight controller that's currently available in our hobby. Driven by the power of the H7 processor, we can display any shape and design live in your OSD. From boot up graphics to full live charts, and animated menus the possibilities are endless. We can’t wait to fully take advantage of our new graphics abilities. \u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eDurable Voltage Regulator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/electricity-98819_640_100x100.jpg?v=1595535996\" alt=\"Flightone H7 Flight Controller\" style=\"margin-bottom: 15px; margin-left: 15px; float: right;\" width=\"100x100\" height=\"100x100\"\u003e\u003c\/div\u003e\n\u003cp\u003eWe wanted a voltage regulator that is dependable and can handle power spikes. Between adding diodes and other protection circuitry and beefing up the existing voltage regulator we have created a flight controller that will last, crash after crash. Much more voltage spike tolerant design should help you feel you can trust your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Plug and Play\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/djikit_240x240.jpg?v=1595536013\" alt=\"Flightone H7 Flight Controller\" style=\"float: left;\"\u003e\u003c\/div\u003e\n\u003cp\u003eDJI version comes with a plug and play cable. Just plug in your DJI receiver on one end and the other end into the flight controller, and get in the air quickly. No need to solder any wires, or know any pin outs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Mounting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/lightning_red-600x600_160x160.jpg?v=1595536031\" alt=\"Flightone H7 Flight Controller\" style=\"float: right;\" width=\"160x160\" height=\"160x160\"\u003e\u003c\/div\u003e\n\u003cp\u003eMount directly in a 30.5mm x 30.5mm hole pattern, or snap off the outside holes and mount directly in a 20mm x 20mm mount. Don’t worry about the 30.5mm x 30.5mm from snapping off, because they are engineered to only be removed under higher forces. If your flight controller ever had the holes snap, the crash was so hard, that the break points will actually keep your flight controller from being damaged. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in America\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/america-1295554_640_160x160.jpg?v=1595536066\" alt=\"Flightone H7 Flight Controller\" style=\"margin-right: 10px; float: left;\" width=\"160x160\" height=\"160x160\"\u003e\u003c\/div\u003e\n\u003cp\u003eWe are proud to be the first company to manufacture in the United States. We were able to get pricing to the point where we can produce in the United States without adding the cost on to the customer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolder or Solderless\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/fc_real_trans_240x240.jpg?v=1595536096\" alt=\"Flightone H7 Flight Controller\" style=\"float: right;\"\u003e\u003c\/div\u003e\n\u003cp class=\"text-muted-lg\"\u003eThe Lightning Flight Controllers is available in two different versions. If you don’t want to do any soldering at all, get the version with connectors. This allows you to easily go plug and play without any other electronics. If a connector ever breaks, the big solder pads are available underneath the connectors. If you prefer to solder, save a couple of bucks, and get the version with connectors removed.\u003c\/p\u003e\n\u003cp class=\"text-muted-lg\"\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca title=\"Flightone H7 Pinout\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/AEBE933F-6A70-4F27-A194-DF927ED8BA4C.png?v=1601625307\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"float: none;\" alt=\"Flightone H7 Pinout\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/2898B820-31A5-4843-92F4-506B94C45BD3.png?v=1601625223\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Flightone H7 500mhz Flight Controller\u003cbr\u003e1x Cable Set (only on connector version)\u003cbr\u003e4x Anti-vibration Grommets\u003c\/p\u003e","brand":"Flightone","offers":[{"title":"Solder Only Version","offer_id":31741598531653,"sku":"","price":46.95,"currency_code":"USD","in_stock":false},{"title":"With Connectors\/Plugs","offer_id":31741598498885,"sku":"","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Flightone_Lightning_H7_500mhz_Flight_Controller_3.jpg?v=1658201775"},{"product_id":"furious-fpv-racepit-flight-controller","title":"Furious FPV Racepit Flight Controller","description":"\u003cp\u003eFurious FPV's Racepit Flight Controllers have pretty much every option you could imagine.  Camera switching, 6 Uarts, power switch for VTX, built-in 16mb blackbox flash memory, and clean 5v BEC are just some of the features.  With an easy to work with layout and solder points for the most popular receivers\/vtxs, this flight controller is simply a joy to work with.\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/description-racepit1new.jpg?v=1596840951\" alt=\"Furious FPV Racepit Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Furious FPV Racepit Flight Controller\u003cbr\u003e4x Anti-vibration Bobbins\u003cbr\u003e4x Standoffs\u003cbr\u003e1x Cable Set \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/furiousfpv.com\/document\/Manual_Furious_\/User_manual_RACEPIT-FC.pdf\" target=\"_blank\" title=\"Furious FPV Racepit Flight Controller Manual\" rel=\"noopener noreferrer\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Furious FPV","offers":[{"title":"Default Title","offer_id":31773519970373,"sku":"","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Furious_FPV_Racepit_Flight_Controller_2.jpg?v=1653427866"},{"product_id":"furious-fpv-racepit-mini-flight-controller","title":"Furious FPV Racepit Mini Flight Controller","description":"\u003cp\u003eGreat option for a 20x20 flight controller.  Capable of 2-6s voltage, 6 Uarts, power switch for vtx, etc.  This diminutive board is full-featured.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/description_racepit_mini-19-7.jpg?v=1596841413\" alt=\"Furious FPV Racepit Mini Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Furious FPV Racepit Mini Flight Controller\u003cbr\u003e4x Anti-Vibration Bobbins\u003cbr\u003e4x Standoffs\u003cbr\u003e1x Cable Set\u003c\/p\u003e","brand":"Furious FPV","offers":[{"title":"Default Title","offer_id":31773527015493,"sku":"","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Furious_FPV_Racepit_Mini_Flight_Controller_3.jpg?v=1653426376"},{"product_id":"furious-fpv-racepit-hd-flight-controller","title":"Furious FPV Racepit HD Flight Controller","description":"\u003cp\u003eThe Furious FPV Racepit HD Flight Controller was purpose made for the DJI Digital Air Unit.  With built-in 8V BEC for powering the Air Unit, and plug and play cables, this FC makes installation a breeze.  Includes additional 5v BEC for all your other gear, 6 Uarts, power switch for VTX, etc.  This is simply one of the best options for any builder.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/description_race_HD-1.jpg?v=1596842841\" alt=\"Furious FPV Racepit HD Flight Controller\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Furious FPV Racepit HD Flight Controller\u003cbr\u003e4x Anti-Vibration Bobbins\u003cbr\u003e4x Standoffs\u003cbr\u003e1x Cable Set\u003c\/p\u003e","brand":"Furious FPV","offers":[{"title":"Default Title","offer_id":31773558865989,"sku":"","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Furious_FPV_Racepit_HD_Flight_Controller_0.jpg?v=1653425269"},{"product_id":"zeez-design-f7-2020-and-45a-blheli_32-stack","title":"ZeeZ Design F7 2020 and 45A BLHeli_32 Stack","description":"\u003cp\u003e\u003cspan\u003eZeeZ Design F7 2020 Flight Controller and 45A 4-in-1 BLHeli_32 ESC stack has all the features of its big sister but in small form factor.  Features 20x20 mounting holes, small size, and direct soldering connection and board space for TBS Nano RX and TBS Unify Pro32 Nano, this is a builder's dream.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eF7 2020 Flight Controller Specifications\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003eDirect solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.\u003c\/li\u003e\n\u003cli\u003eUp to 8S input (max 36V)\u003c\/li\u003e\n\u003cli\u003e5V BEC up to 3A continuous\u003c\/li\u003e\n\u003cli\u003eSTM32F722 MCU (Support Betaflight, INav, Emuflight)\u003c\/li\u003e\n\u003cli\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e128MB Onboard flash\u003c\/li\u003e\n\u003cli\u003eOSD chip Onboard\u003c\/li\u003e\n\u003cli\u003e6 available UARTS\u003c\/li\u003e\n\u003cli\u003eVTX switch to control the ON\/OFF of the VTX\u003cbr\u003edirectly from your transmitter (control via Betaflight with USER1 mode)\u003c\/li\u003e\n\u003cli\u003eLC Filter for 5V VTX and Camera\u003c\/li\u003e\n\u003cli\u003eUSB Type C connector\u003c\/li\u003e\n\u003cli\u003eOnboard RGB LED distribution for clean wiring\u003cbr\u003eto the LED on the arm of the quad.\u003c\/li\u003e\n\u003cli\u003e8 Onboard RBG LED (compliant with FAI Rules)\u003c\/li\u003e\n\u003cli\u003eLogic Side and USB current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e45A 4-In-1 BLHeli_32 ESC Specifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003e3S to 6S input\u003c\/li\u003e\n\u003cli\u003eConstant Current: 45A\u003c\/li\u003e\n\u003cli\u003ePeak Current: 55A\u003c\/li\u003e\n\u003cli\u003eSTM32L4 MCU (ARM Cortex M4, 80MHz frequency)\u003c\/li\u003e\n\u003cli\u003eBlHeli32 Firmware (support Dshot150\/ Dhsot300 \/Dshot600\/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)\u003c\/li\u003e\n\u003cli\u003e8 Pin JST connector and 8 Pin solder pads\u003c\/li\u003e\n\u003cli\u003eHoles for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)\u003c\/li\u003e\n\u003cli\u003eOnboard analog current sensor (Betaflight Scale: 200)\u003c\/li\u003e\n\u003cli\u003eESC telemetry to read RPM and ESC temperature\u003c\/li\u003e\n\u003cli\u003eCompatible with Bidirectional Dshot out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight and Dimension\u003c\/strong\u003e:\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight (including FC+ESC+ 8X Standoff + 4X Nut + 8 Pin connector) :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e19.9gr\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: ( L X W X H) :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e41.6mm X 33.6mm X 19.6 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan\u003e1x Zeez F7  2020 Flight Controller\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x Zeez ESC 4in1 45A 2020\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8x Aluminum Standoff\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Aluminum Nut\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to 8 Pin \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x ESC to Flight Controller 8 Pin to Servo Connector\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 8 Pin Plastic Housing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 10 Pin Plastic Housing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 470uF 35V Low ESR Capacitor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x XT60 with 12AWG Silicon Cable for battery connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.00mm Header Pin for VTX connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x 2.54mm Header Pin for Receiver connection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31784744747077,"sku":"","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_F7_2020_and_45A_BLHeli_32_Stack_6.jpg?v=1658201589"},{"product_id":"zeez-design-f7-2020-flight-controller","title":"ZeeZ Design F7 2020 Flight Controller","description":"\u003cp\u003e\u003ca title=\"Zeez Design F7 2020 V2 Flight Controller\" href=\"https:\/\/www.defiancerc.com\/products\/zeez-rc-f7-2020-flight-controller-v2\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e** Discontinued - New Version Here **\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eZeeZ Design's small format F7 Flight Controller features 20x20 mounting holes, up to 8s input with \u003cspan\u003e5V @3A BEC (protected from over-current, over-temperature, and short circuit) for powering all peripherals (such as CAM, VTX, LED, RX).  Weighing in at only 7.25g and measuring 35.7mm x 30mm, this little guy retains all of its big sister's features, including direct solder points and board space for the TBS Nano RX and TBS Unify Pro32 Nano.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Holes 20×20\u003c\/li\u003e\n\u003cli\u003eDirect solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.\u003c\/li\u003e\n\u003cli\u003eUp to 8S input (max 36V)\u003c\/li\u003e\n\u003cli\u003e5V BEC up to 3A continuous\u003c\/li\u003e\n\u003cli\u003eSTM32F722 MCU (Support Betaflight, INav, Emuflight)\u003c\/li\u003e\n\u003cli\u003eMPU6000 Gyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e128MB Onboard flash\u003c\/li\u003e\n\u003cli\u003eOSD chip Onboard\u003c\/li\u003e\n\u003cli\u003e6 available UARTS\u003c\/li\u003e\n\u003cli\u003eVTX switch to control the ON\/OFF of the VTX\u003cbr\u003edirectly from your transmitter (control via Betaflight with USER1 mode)\u003c\/li\u003e\n\u003cli\u003eLC Filter for 5V VTX and Camera\u003c\/li\u003e\n\u003cli\u003eUSB Type C connector\u003c\/li\u003e\n\u003cli\u003eOnboard RGB LED distribution for clean wiring\u003cbr\u003eto the LED on the arm of the quad.\u003c\/li\u003e\n\u003cli\u003e8 Onboard RBG LED (compliant with FAI Rules)\u003c\/li\u003e\n\u003cli\u003eLogic Side and USB current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"ZeeZ Design F7 2020 Flight Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/FC_Dimension.jpg?v=1597335721\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez F7 2020 Flight Controller\u003cbr\u003e4x Aluminum Standoff\u003cbr\u003e4s Aluminum Nut\u003cbr\u003e1x ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector\u003cbr\u003e1x ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) \u003cbr\u003e1x JST SH 10 Pin Plastic Housing\u003cbr\u003e2x 2.00mm Header Pin for VTX connection\u003cbr\u003e2x 2.54mm Header Pin for Receiver connection\u003cbr\u003e2x Spare M3 rubber anti-vibration for Flight Controller or ESC\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":31784763162693,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/ZeeZ_Design_F7_2020_Flight_Controller_7.jpg?v=1658199296"},{"product_id":"holybro-kakute-f7-mini-flight-controller-v3","title":"Holybro Kakute F7 Mini Flight Controller V3","description":"\u003cp\u003eA 20x20 flight controller featuring the F7 MCU, 5 hardware UARTS, MPU6000 Gyro, DJI Air Unit connections, and even a Barometer.  This little guy has it all.  Another fantastic flight controller from mad scientists at Holybro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F722RET6 32-bit processor,216MHz, 256Kbytes RAM, 512Kbytes Flash\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\n\u003cli\u003e5hardware UARTS (UART1,2,3,4,6)\u003c\/li\u003e\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\n\u003cli\u003eOnboard 16Mbytes for Blackbox logging\u003c\/li\u003e\n\u003cli\u003e5V Power Out: 1.0A max\u003c\/li\u003e\n\u003cli\u003e3.3V Power Out: 0.2A max\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 20mm square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/0bb841c26c.png?v=1598317222\" alt=\"Holybro Kakute F7 Mini V3 Pinout\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e\u003cspan mce-data-marked=\"1\"\u003e1x Holybro Kakute F7 Mini Flight Controller V3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x M3 Anti-Vibration Silicone Grommet Insert\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 8pin 150mm cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 6pin 150mm cable ( The cable that goes to the CADDX Vista Air Unit is included.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x JST SH 6pin to GH 8pin 150mm cable ( The cable that goes to the DJI Air Unit is included.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x  JST SH 6pin to GH 8pin 80mm cable ( The cable that goes to the DJI Air Unit is included.)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_KakuteF7_Mini_V3_Manual_v1.0.pdf\" target=\"_blank\" title=\"Download Kakute F7 Mini V3 Manual\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eDownload Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":31803740225605,"sku":"","price":33.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Holybro_Kakute_F7_Mini_Flight_Controller_V3_6.jpg?v=1658201558"},{"product_id":"speedy-bee-f7-aio-flight-controller","title":"Speedy Bee F7 AIO Flight Controller","description":"\u003cp\u003eAn F7 Flight Controller with built-in PDB for those still using individual ESCs.  This FC also comes with connection headers so you can connect it to any 4-In-1 ESC.  Completely brilliant! \u003c\/p\u003e\n\u003cp\u003eThis is a feature-rich FC with all the bells and whistles.  Includes 4 UARTS, 3s-6s Input, 32MB onboard flash memory, an extra UART for connecting to \u003ca title=\"SPEEDY BEE BETAFLIGHT + INAV ADAPTER 2\" href=\"https:\/\/www.defiancerc.com\/products\/speedy-bee-betaflight-adapter-2\" target=\"_blank\"\u003eSpeedy Bee's Adapter\u003c\/a\u003e, \u003cspan\u003eICM20689 IMU, STM32F722 MCU, BMP280 (I2C) barometer, and built-in Bluetooth chip.  This full-featured FC is perfect for both multi-rotors or airplane builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the built-in Bluetooth chip, you are able to use Speedy Bee's IOS\/Android App, allowing you to configure the flight controller with your phone without any wires.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/aB1oOq49kV0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"Speedy Bee F7 AIO Flight Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_1_e343112b-926d-421b-8ef4-30e40b721220.jpg?v=1600115681\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_2_8e96c899-491e-4bb6-8f71-a4387d39bbc9.jpg?v=1600115715\" alt=\"Speedy Bee F7 AIO Flight Controller\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_3_024bab34-aada-42cd-8cfc-9b90cce343e9.jpg?v=1600115810\" alt=\"Speedy Bee F7 AIO Flight Controller\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_4_a4d22fe3-2070-4b82-b353-ced0164b8b99.jpg?v=1600115834\" alt=\"Speedy Bee F7 AIO Flight Controller\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_5_5cf4b528-9562-47d9-9469-860be4df4282.jpg?v=1600115863\" alt=\"Speedy Bee F7 AIO Flight Controller\"\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/F7AIO-06.jpg\" title=\"Speedy Bee F7 AIO Flight Controller\" target=\"_blank\"\u003e\u003cimg alt=\"Speedy Bee F7 AIO Flight Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/F7AIO-06.jpg?v=1600116620\"\u003e\u003c\/a\u003e\u003cimg alt=\"Speedy Bee F7 AIO Flight Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/img_7_4ad610a7-502d-4c1d-868c-08bd91f08786.jpg?v=1600115984\"\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.speedybee.com\/product_images\/download\/manual\/SBF7_AIO_manual.pdf\" title=\"Speedy Bee F7 AIO Flight Controller Manual\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Speedy Bee","offers":[{"title":"Default Title","offer_id":31845024464965,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Speedy_Bee_F7_AIO_Flight_Controller_5.jpg?v=1658199033"},{"product_id":"brainfpv-radix-2-h7-flight-controller","title":"BrainFPV Radix 2 H7 Flight Controller V1.2","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/brainfpv-radix-2-h7-flight-controller-v2-0\" title=\"BrainFPV Radix 2 8S H7 Flight Controller Rev 2.0\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note TWO changes since in V 1.2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRADIX2 IS NOW MADE IN OREGON, USA!\u003c\/strong\u003e #SCREAMINGEAGLES #MURICA\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChanges made to RADIX 2 Revision 1.2 Released in 2022 (aka this batch)\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eImproved barometer: Omron 2SMPB-02B\u003c\/li\u003e\n\u003cli\u003eTVS diode (“spike protector”) to protect 5 V regulator from voltage spikes\u003c\/li\u003e\n\u003cli\u003eRemoved VTX pit switch over-current protection. Pit switch can supply up to 1.5 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe RADIX 2 is the latest generation flight controller by BrainFPV. It is the successor of the legendary RADIX flight controller and everything has been vastly improved. From a blazing fast H7 processor running at 480 MHz, an improved graphical OSD, a built-in voltage regulator that can handle up to 8S (35 V), to 8 motor outputs, driverless flashing, and more.\u003c\/p\u003e\n\u003cp\u003eThe RADIX 2 is designed to be compatible with any 4-in-1 motor controller (ESC) on the market. For octocopters, you can use the included 5-pin cable to connect a second 4-in-1 ESC for motors 5 to 8. All outputs fully support bi-directional DSHOT that enables the motor controllers to send back real-time telemetry that is used by the flight controller to perform adaptive RPM based noise filtering.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image size-large\"\u003e\u003cimg loading=\"lazy\" width=\"1024\" height=\"176\" src=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1024x176.jpg\" data-src=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1024x176.jpg\" alt=\"\" class=\"wp-image-17727 lazyloaded\" data-srcset=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1024x176.jpg 1024w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-300x51.jpg 300w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-768x132.jpg 768w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1536x263.jpg 1536w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-500x86.jpg 500w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner.jpg 2000w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1024x176.jpg 1024w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-300x51.jpg 300w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-768x132.jpg 768w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-1536x263.jpg 1536w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner-500x86.jpg 500w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/banner.jpg 2000w\"\u003e\u003c\/figure\u003e\n\u003cp\u003eIf you prefer to use a separate ESC for each motor, the companion product, the RADIX 2 Power Board (PB) got you covered. It is designed for serious power and can handle up to 8S (35 V) battery voltage and 160 A constant current (220 A burst). It also features an LC filter and voltage regulator for clean power to the flight controller and connected peripherals.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image size-large\"\u003e\u003cimg loading=\"lazy\" width=\"1024\" height=\"747\" src=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-1024x747.jpg\" data-src=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-1024x747.jpg\" alt=\"\" class=\"wp-image-17736 ls-is-cached lazyloaded\" data-srcset=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-1024x747.jpg 1024w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-300x219.jpg 300w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-768x560.jpg 768w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-500x365.jpg 500w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200.jpg 1200w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-1024x747.jpg 1024w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-300x219.jpg 300w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-768x560.jpg 768w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200-500x365.jpg 500w, https:\/\/www.brainfpv.com\/wp-content\/uploads\/2020\/12\/radix2stack_product_notext_1200.jpg 1200w\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNew Processor:\u003c\/strong\u003e STM32 H7 processor running at 480 MHz with 1 MB RAM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNew Gyro:\u003c\/strong\u003e New Bosch Sensortec BMI270 gyro \/ accelerometer delivering superior flight performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNew Baro: \u003c\/strong\u003eOmron 2SMPB-02B barometer for accurate altitude readings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBetter OSD:\u003c\/strong\u003e Improved full graphical on-screen-display (OSD) with gray levels and transparency\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDual camera input:\u003c\/strong\u003e Camera can be switched using a switch on the RC transmitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eVTX pit switch\u003c\/strong\u003e:  to turn on\/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts (Removed VTX pit switch over-current protection. Pit switch can supply up to 1.5 A)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e32 MByte built-in flash memory:\u003c\/strong\u003e 30 MByte available for logging and settings storage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDriverless flashing\u003c\/strong\u003e with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eRGB status LED\u003c\/strong\u003e with customizable color\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e8 motor outputs:\u003c\/strong\u003e all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e6 serial ports (UARTs):\u003c\/strong\u003e all with integrated inverters for S-BUS and other inverted protocols\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eI2C port\u003c\/strong\u003e for external sensors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRGB LED output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuzzer output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eCamera control\u003c\/strong\u003e output for configuring analog cameras\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnalog RSSI input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e5 V regulator\u003c\/strong\u003e with 1.5 A output and up to 8S (35 V) input voltage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eUSB Type-C connector\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize: 37 x 37 mm (30.5 mm hole spacing)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 7g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eYou can use 2\u003c\/strong\u003e 4-in-1 ESCs for an octocopter. Holy mother of FPV!  It comes with cables and connectors to easily make your own wiring harness. Happy Christmas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x BrainFPV Radix 2 H7 Flight Controller V1.2\u003cbr\u003e1x Wire Harness Set\u003cbr\u003e1x Sticker Set\u003cbr\u003e4x Anti-vibration Grommets\u003c\/span\u003e\u003c\/p\u003e","brand":"BrainFPV","offers":[{"title":"Default Title","offer_id":32006556450885,"sku":"","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/BrainFPV-Radix-2-H7-Flight-Controller-V1-2-0.jpg?v=1707775969"},{"product_id":"flywoo-goku-hex-f745-16x16-stack","title":"Flywoo Goku Hex F745 16x16 Stack","description":"\u003cp\u003eThe Flywoo Goku Hex F745 Stack includes the Hex F745 Flight Controller and the Hex BS13A ESC.  This FC uses\u003cspan data-mce-fragment=\"1\"\u003e a powerful F745 BGA chip, features a \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ebarometer, black box, WS2812LED, \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esupport 7 complete hardware serial ports, I2C, and other functions.  Enough to meet all FPV needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eYou need this stack if you are considering the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" title=\"Hexplorer Frame Kit\" target=\"_blank\"\u003eFlywoo Hexplorer 4 LR Frame Kit\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGOKU F745 BGA Flight Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSIZE: 22*23mm Weight: 2.3g\u003c\/li\u003e\n\u003cli\u003eHole: 16*16-3mm\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F745\u003c\/li\u003e\n\u003cli\u003eUARTS: 1\/2\/3\/4\/5\/6\/7\u003c\/li\u003e\n\u003cli\u003eI2C: SCL\/SDA\u003c\/li\u003e\n\u003cli\u003eGYRO: MPU6000\u003c\/li\u003e\n\u003cli\u003eBARO: BMP280 BEC: 5V 2A\u003c\/li\u003e\n\u003cli\u003eLED:4*WS2812 FLASH: 8M\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 2-4S\u003c\/li\u003e\n\u003cli\u003eFirmware: FLYWOOF745NANO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGOKU HEX 6IN1 BS13A ESC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBS13A BLheli_S 2-6S 4in1\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003cli\u003eMounting Hole: 16x16mm (M3)\u003c\/li\u003e\n\u003cli\u003eSupport Oneshot, Multishot, DShot150\/300\/600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"Flywoo Goku Hex F745 Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/6d17dad41e042976808c9242e688adc6_2048x2048_292a619f-d125-4d6a-9d95-79251f197830.jpg?v=1609818687\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Goku Hex F745 Flight Controller\u003cbr\u003e1x Goku Hex BS13A ESC\u003c\/p\u003e\n\u003cp\u003eThis stack works great in the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" title=\"Hexplorer Frame Kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.defiancerc.com\/products\/flywoo-hexplorer-lr-4-hex-copter-frame-kit\" target=\"_blank\"\u003eFlywoo Hexplorer 4 LR Frame Kit\u003c\/a\u003e\u003c\/p\u003e","brand":"Flywoo","offers":[{"title":"Default Title","offer_id":32022031073349,"sku":"","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Flywoo_Goku_Hex_F745_16x16_Stack_6.jpg?v=1658202675"},{"product_id":"fettec-mini-kiss-aio-15a","title":"FETtec Mini KISS AIO 15A","description":"\u003cp\u003eThe FETtec Mini AIO is a KISS flight controller and 15A 4-In-1 ESC on a single tiny board.  Measures just 29 x 29mm, this thing is perfect for small builds and whoops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull FETtec AIO with KISS FC Firmware\u003c\/li\u003e\n\u003cli\u003e4 ESCs 15A\u003c\/li\u003e\n\u003cli\u003e2-4s\u003c\/li\u003e\n\u003cli\u003eGraphical OSD with full KISS tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eFC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTM32F303CCT6 @ 72MHz\u003c\/li\u003e\n\u003cli\u003eMPU6000\u003c\/li\u003e\n\u003cli\u003eSupply voltage 6-18V (2-4s LiPo)\u003c\/li\u003e\n\u003cli\u003e1x 5V BEC (max 1A)\u003c\/li\u003e\n\u003cli\u003eDshot 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eESC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActive current limiting @ 15A\u003c\/li\u003e\n\u003cli\u003eInput voltage: 2s-4s\u003c\/li\u003e\n\u003cli\u003eHigh-quality 30V MOSFETs\u003c\/li\u003e\n\u003cli\u003eSTM32G071 @ 64MHz\u003c\/li\u003e\n\u003cli\u003e128 kHz Motor PWM\u003c\/li\u003e\n\u003cli\u003eAutomatic input signal detection\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDshot\u003c\/li\u003e\n\u003cli\u003ePWM\u003c\/li\u003e\n\u003cli\u003eOneShot42\/125\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/image_2020_08_31T09_39_04_262Z.jpg?v=1611615053\" alt=\"Fettec Mini AIO 15A Dimensions\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 29 x 29 mm\u003c\/li\u003e\n\u003cli\u003eMounting: 25,5 x 25,5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3,41 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FETtec Mini KISS AIO 15A\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"FETtec Mini KISS AIO 15A Manual\" href=\"https:\/\/fettec.net\/media\/pdf\/fe\/49\/6b\/Manual-FETtec-AIO.pdf\" target=\"_blank\"\u003eDownload Manual\u003cbr\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/fettec.net\/media\/pdf\/fd\/c8\/32\/FETtec-Drift-Car-Manual.pdf\" target=\"_blank\" title=\"FETtec Drift Car Manual \" rel=\"noopener noreferrer\"\u003eDownload FETtec Drift Car Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"FETtec","offers":[{"title":"Default Title","offer_id":32048165158981,"sku":"","price":68.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/FETtec_Mini_KISS_AIO_15A_0.jpg?v=1665243992"},{"product_id":"zeez-rc-f7-3030-flight-controller-v2","title":"Zeez RC F7 3030 Flight Controller V2","description":"\u003cp\u003eThe Zeez F7 V2 3030 is an 8 motor output, DJI HD system ready flight controller with an on-board 9v@3A regulator to power the DJI Air Unit, with simple plug and play configuration and 5V@3A regulator to power all the peripherals.\u003c\/p\u003e\n\u003cp\u003eIt uses a powerful F7 processor along with top-of-the-line hardware:  MPU6000 Gyro, BMP280 Barometer.  The Zeez F7 V2 3030 comes in a standard 30x30 form factor.  It comes with space and solder pads for both the TBS Crossfire Nano Rx and TBS Unify Nano32 for a very clean and low-profile assembly.  It has easy plug and play RGB LED with 4 connectors on the corners plus 4 onboard RGB LEDs.  There are 5 UARTS available as well as I2C port, 16MB flash memory for blackbox data recording, an OSD chip for analog video, and LC filter for both analog camera and vtx power.\u003c\/p\u003e\n\u003cp\u003eZeez has taken all the feedback from the V1 board and have improved the overall stability as well as cleaning up the power supply.  The solder pads are easier to reach and the strength of the pads have all been improved by adding additional copper around them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes\u003c\/strong\u003e: 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiPo Power input\u003c\/strong\u003e: 3S-6S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 Motor\u003c\/strong\u003e output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC\u003c\/strong\u003e 5V-3A \/ 9V-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTM32F722 MCU\u003c\/strong\u003e (216MHz max frequency)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPU6000\u003c\/strong\u003e Gyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMP280\u003c\/strong\u003e Barometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD chip\u003c\/strong\u003e Onboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 available\u003c\/strong\u003e UARTs \/ I2C bus \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16MB\u003c\/strong\u003e Onboard flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC Filter\u003c\/strong\u003e for 5V VTX and CAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD Plug\u003c\/strong\u003e for DJI Air Unit or Caddx Vista\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type C\u003c\/strong\u003e connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard RGB LED\u003c\/strong\u003e distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard 4 WS2812B\u003c\/strong\u003e RBG LED\u003c\/li\u003e\n\u003cli\u003eDirect solder connection and board space for \u003ca title=\"TBS Crossfire Nano Receiver\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-crossfire-nano-rx\" target=\"_blank\"\u003e\u003cstrong\u003eTBS Nano RX\u003c\/strong\u003e\u003c\/a\u003e and \u003ca title=\"TBS UNIFY PRO32 NANO 5G8 V1.1\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-unify-pro32-nano-5g8-v1-1\" target=\"_blank\"\u003e\u003cstrong\u003eTBS Unify Pro32 Nano\u003c\/strong\u003e\u003c\/a\u003e providing the ultimate in clean stack installation\u003c\/li\u003e\n\u003cli\u003eLogic Side and USB current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/image_80ed4501-aaa4-4076-8288-1fb87213479d-01.jpg?v=1614873951\" title=\"Zeez F7 3030 FC V2\" target=\"_blank\"\u003e\u003cimg style=\"float: none;\" alt=\"Zeez F7 3030 Flight Controller V2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/image_80ed4501-aaa4-4076-8288-1fb87213479d-01_600x600.jpg?v=1614873951\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez F7 V2 3030 Flight Controller \u003cbr\u003e4x Aluminum Standoff \u003cbr\u003e4x Aluminum Nut\u003cbr\u003e1x ESC to Flight Controller 8 Pin JST SH 1.00mm\u003cbr\u003e1x ESC to Flight Controller 8 Pin to wires (with JST SH crimp)\u003cbr\u003e1x JST SH 1.00mm connector \u003cbr\u003e1x JST SH 8 Pin Plastic Housing \u003cbr\u003e1x JST SH 10 Pin Plastic Housing \u003cbr\u003e2x 2.00mm Header Pin for VTX connection \u003cbr\u003e2x 2.54mm Header Pin for Receiver connection \u003cbr\u003e1x JST 6 pin to AirUnit Connector\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Zeez F7 3030 FC V2 Manual\" href=\"https:\/\/zeezrc.com\/wp-content\/uploads\/2021\/02\/3030_FC_Manual.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":39254628859973,"sku":"","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Zeez-RC-F7-3030-Flight-Controller-V2-1.jpg?v=1709834506"},{"product_id":"zeez-rc-f7-2020-flight-controller-v2","title":"Zeez RC F7 2020 Flight Controller V2","description":"\u003cp\u003e** Discontinued - \u003ca href=\"https:\/\/www.defiancerc.com\/products\/zeez-rc-f7-2020-flight-controller-v2-lite\" title=\"Zeez RC F7 2020 Flight Controller Lite V2\"\u003eNew Version Here\u003c\/a\u003e **\u003c\/p\u003e\n\u003cp\u003eThe Zeez F7 V2 2020 is an 8 motor output, DJI HD system ready flight controller with an on-board 9v@3A regulator to power the DJI Air Unit, with simple plug and play configuration and 5V@3A regulator to power all the peripherals.  It has all the specs and features of its big brother, the \u003ca title=\"Zeez F7 3030 FC V2\" href=\"https:\/\/www.defiancerc.com\/products\/zeez-rc-f7-3030-flight-controller-v2\" target=\"_blank\" data-mce-href=\"https:\/\/www.defiancerc.com\/products\/zeez-rc-f7-3030-flight-controller-v2\"\u003e3030 version\u003c\/a\u003e, but in a more compact format.\u003c\/p\u003e\n\u003cp\u003eIt uses a powerful F7 processor along with top-of-the-line hardware:  MPU6000 Gyro, BMP280 Barometer.  The Zeez F7 V2 2020 comes in a standard 20x20 form factor.  It comes with space and solder pads for both the TBS Crossfire Nano Rx and TBS Unify Nano32 for a very clean and low-profile assembly.  It has 4 onboard RGB LED's and easy to solder LED pads on each corner.  There are 5 UARTS available as well as I2C port, 16MB flash memory for blackbox data recording, an OSD chip for analog video, and LC filter for both analog camera and vtx power.\u003c\/p\u003e\n\u003cp\u003eZeez has taken all the feedback from the V1 board and have improved the overall stability as well as cleaning up the power supply.  They were able to reduce the size of the FC, thanks to its 6 layer design.  Along with easier to solder pads, Zeez was able to improve their strength by adding additional copper around them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes\u003c\/strong\u003e: 20x20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiPo Power input\u003c\/strong\u003e: 3S-6S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 Motor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoutput\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5V-3A \/ 9V-3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTM32F722 MCU\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(216MHz max frequency)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPU6000\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGyro\/ACC for smooth performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMP280\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBarometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD chip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 available\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUARTs\u003c\/li\u003e\n\u003cli\u003e1x I2C bus \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16MB\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnboard flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLC Filter\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor 5V VTX and CAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD Plug\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor DJI Air Unit or Caddx Vista\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard RGB LED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edistribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard 4 WS2812B\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRBG LED\u003c\/li\u003e\n\u003cli\u003eDirect solder connection and board space for\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"TBS Crossfire Nano Receiver\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-crossfire-nano-rx\" data-mce-href=\"https:\/\/www.defiancerc.com\/products\/tbs-crossfire-nano-rx\" target=\"_blank\"\u003e\u003cstrong\u003eTBS Nano RX\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"TBS UNIFY PRO32 NANO 5G8 V1.1\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-unify-pro32-nano-5g8-v1-1\" data-mce-href=\"https:\/\/www.defiancerc.com\/products\/tbs-unify-pro32-nano-5g8-v1-1\" target=\"_blank\"\u003e\u003cstrong\u003eTBS Unify Pro32 Nano\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eproviding the ultimate in clean stack installation\u003c\/li\u003e\n\u003cli\u003eLogic Side and USB current protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"Zeez F7 2020 FC\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Zeez.jpg?v=1614876578\" target=\"_blank\"\u003e\u003cimg data-mce-fragment=\"1\" alt=\"Zeez F7 2020 FC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Zeez_600x600.jpg?v=1614876578\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Zeez_600x600.jpg?v=1614876578\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Zeez F7 V2 2020 Flight Controller\u003cbr\u003e4x Aluminum Standoff \u003cbr\u003e4x Aluminum Nut \u003cbr\u003e1x ESC to Flight Controller 8 Pin JST SH 1.00mm connector\u003cbr\u003e1x ESC to Flight Controller 8 Pin (with JST SH crimp) \u003cbr\u003e1x JST SH 1.00mm connector \u003cbr\u003e1x JST SH 8 Pin Plastic Housing \u003cbr\u003e1x JST SH 10 Pin Plastic Housing \u003cbr\u003e2x 2.00mm Header Pin for VTX connection \u003cbr\u003e2x 2.54mm Header Pin for Receiver connection \u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x JST 6 pin to AirUnit Connector \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Zeez F7 2020 FC V2 Manual\" href=\"https:\/\/zeezrc.com\/wp-content\/uploads\/2021\/02\/2020_FC_Manual-1.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"ZeeZ Design","offers":[{"title":"Default Title","offer_id":39254635479109,"sku":"","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Zeez-RC-F7-2020-Flight-Controller-V2-9.jpg?v=1709834490"},{"product_id":"tbs-podracer-aio","title":"TBS Podracer AIO","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Podracer AIO is a powerful whoop board designed in conjunction with Italian outfit, \u003c\/span\u003e\u003ca title=\"Zeez RC\" href=\"https:\/\/www.defiancerc.com\/collections\/latest-products\/brand_zeez-design\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.defiancerc.com\/collections\/latest-products\/brand_zeez-design\" target=\"_blank\"\u003eZeez\u003c\/a\u003e, \u003cspan data-mce-fragment=\"1\"\u003eto make the ultimate whoop AIO.  This board\u003c\/span\u003e is a designed to cater for TBS \u003ca title=\"TBS Unify Pro32 Nano\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-unify-pro32-nano-5g8-v1-1\" target=\"_blank\"\u003ePro32 Nano VTX\u003c\/a\u003e and TBS \u003ca title=\"TBS Crossfire Nano RX\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-crossfire-nano-rx\" target=\"_blank\"\u003eCrossfire\u003c\/a\u003e \/ \u003ca title=\"TBS Tracer Nano Rx\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-tracer-nano-rx\" target=\"_blank\"\u003eTracer\u003c\/a\u003e Nano RX with direct pin-header installation. The result is a clean, compact, and lightweight core for your build.\u003c\/p\u003e\n\u003cp\u003eThe FC is equipped with F4+MPU6000 and the ESC is capable of True 30A current running BLHeli32. This board is versitle enough to run on your cinewhoop, 4\/5\" racer like the podracer and long-range cruiser like the \u003ca title=\"TBS Aureo\" href=\"https:\/\/www.defiancerc.com\/products\/tbs-source-aureo-7-frame\" target=\"_blank\"\u003eTBS Aureo\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFC Side\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting holes: 25.5×25.5 mm \/ M2 holes\u003c\/li\u003e\n\u003cli\u003eUp to 6S input\u003c\/li\u003e\n\u003cli\u003e5V BEC up to 1.2A continuous\u003c\/li\u003e\n\u003cli\u003eSTM32F411 MCU (Support BetaFlight, EmuFlight)\u003c\/li\u003e\n\u003cli\u003eMPU6000 Gyro\/ACC\u003c\/li\u003e\n\u003cli\u003eOSD chip Onboard (AT7456E)\u003c\/li\u003e\n\u003cli\u003e2 available UART\u003c\/li\u003e\n\u003cli\u003eLC Filter for 5V VTX and Camera\u003c\/li\u003e\n\u003cli\u003eDirect solder connection for TBS Nano RX and TBS Unify Pro32 Nano\u003c\/li\u003e\n\u003cli\u003eSupport programmable LED like WS2812 etc\u003c\/li\u003e\n\u003cli\u003eBuilt-in current sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eESC Side\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600\u003c\/li\u003e\n\u003cli\u003eInput voltage: 2S-6S Lipo\u003c\/li\u003e\n\u003cli\u003eContinuous current: 30A\u003c\/li\u003e\n\u003cli\u003ePeak current: 35A\u003c\/li\u003e\n\u003cli\u003eESC firmware: BLHELI 32\u003c\/li\u003e\n\u003cli\u003ePWM Frequency Range: 24KHz up to 96KHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBecause of the phyiscal limitations, installing a GPS module to the FC will require a few extra steps to remap the board's resources. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNote: The follow steps will disable LED and FC's SmartAudio and use as softserial for GPS.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/PODRACER_AIO_-_GPS_-_SS.jpg?v=1615519935\" alt=\"TBS Podracer AIO\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow To\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e 1. Flash the board with Target: STM32F411\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"TBS Podracer AIO\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/PODRACER_AIO_-_GPS_Target_600x600.jpg?v=1615519981\"\u003e\u003c\/div\u003e\n\u003cp\u003e2. Download the Config file \u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs_podracer_aio_gps.config\"\u003e[HERE]\u003c\/a\u003e. Then load it on the board. \u003c\/p\u003e\n\u003cp\u003e3. Wire the GPS as shown \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/A73s01607_600x600.jpg?v=1615520046\" alt=\"TBS Podracer AIO\" width=\"600x600\" height=\"600x600\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x TBS Podracer AIO \u0026gt;1x Capacitor\u003cbr\u003e1x AWG Cables Set with Shrink Tubes\u003cbr\u003e4x Mounting Gromets\u003cbr\u003e1x XT60 (Male)\u003cbr\u003e1x XT30 (Male)\u003cbr\u003e1x Pinheaders set for TBS VTX and RX\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Team-Blacksheep","offers":[{"title":"Default Title","offer_id":39265358970949,"sku":"","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/TBS_Podracer_AIO_2.jpg?v=1658196671"},{"product_id":"skystars-rc-f722hd-dji-20x20-flight-controller","title":"Skystars RC F722HD 20x20 Flight Controller","description":"\u003cp\u003e\u003cspan\u003eThe Skystars RC F722HD is an F7 based flight controller with 20x20 mounting pattern and features 6 hardware UARTS, STM32F722RGT6 216MHz MCU, barometer, and support for both Betaflight OSD and DJI OSD (UART 6).  Fantastic little board with a great layout and easy to reach solder pads at a fantastic price.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F722RGT6 216MHz\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000 (SPI)\u003c\/li\u003e\n\u003cli\u003eOSD: Betaflight OSD \u0026amp; DJI HD OSD (UART6)\u003c\/li\u003e\n\u003cli\u003e6 hardware UARTS (UART123456)\u003c\/li\u003e\n\u003cli\u003eBarometer: YES\u003c\/li\u003e\n\u003cli\u003eBuzzer Pad: YES\u003c\/li\u003e\n\u003cli\u003e5V 2A \u0026amp; 10V 2A\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3-6S Lipo\u003c\/li\u003e\n\u003cli\u003eBlackbox: 16MB\u003c\/li\u003e\n\u003cli\u003eFirmware: SKYSTARS F7HD\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x28x7mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Standard 20mm\/M3 square to center of holes\u003c\/li\u003e\n\u003cli\u003eWeight: 4.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/1-20111Q24JB24_600x600.jpg?v=1615866033\" alt=\"Skystars RC F7HD 2020\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Skystars RC F722HD DJI 20x20 Flight Controller\u003cbr\u003e4x Rubber Grommet \u003cbr\u003e1x Wire Harness\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/skystars-rc.com\/Products\/ESC\/2020\/1118\/92.html\" title=\"Skystars RC F722HD 2020 Flight Controller\" target=\"_blank\"\u003eDownload Connection Diagrams Here\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Skystars RC","offers":[{"title":"Default Title","offer_id":39269861785669,"sku":"","price":47.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Skystars_RC_F722HD_20x20_Flight_Controller_9.jpg?v=1658203402"},{"product_id":"skystars-rc-f722hd-dji-30x30-flight-controller","title":"Skystars RC F722HD 30x30 Flight Controller","description":"\u003cp\u003eThe Skystars RC F722HD is an F7 based flight controller with 30x30 mounting pattern and features 6 hardware UARTS, STM32F722RGT6 216MHz MCU, barometer, and support for both Betaflight OSD and DJI OSD (UART 6).  Fantastic board with great layout and easy to reach solder pads at a fantastic price.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSupport for easy WS2812 programmable LED installation in four corners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports serial receivers (SBUS iBus Spektrum Crossfire PPM)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupport 3.3V Satellite Receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHigh-performance \/ low-noise \/ high sensitivity IMU. MPU6000 with 6-axis gyro and \u003c\/span\u003eaccelerometer\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes a DJI HD cable in default\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput voltage12V-26V (3-6S)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic voltage monitoring\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMCU: STM32F722RGT6 216MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIMU: MPU6000 (SPI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSD: Betaflight OSD \u0026amp;  DJI HD OSD (UART6)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6 hardware UARTS (UART123467)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5V 3A \u0026amp; 10V 3A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput Voltage: 3-6S Lipo\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlackbox: 8MB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware: SKYSTARS F7HD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 38.5x40x6.2mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 6.2g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Skystars RC F722HD DJI 30x30 Flight Controller\u003cbr\u003e4x Rubber Grommet \u003cbr\u003e1x Wire Harness\u003c\/p\u003e","brand":"Skystars RC","offers":[{"title":"Default Title","offer_id":39269864472645,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Skystars_RC_F722HD_30x30_Flight_Controller_0.jpg?v=1658200855"},{"product_id":"speedy-bee-f7-v2-flight-controller-with-built-in-wifi-and-bluetooth","title":"Speedy Bee F7 V2 Flight Controller With Built-In WiFi and Bluetooth","description":"\u003cp\u003eThe Speedy Bee F7 V2 Flight Controller features a built-in WiFi\/Bluetooth chip, allowing pilots to adjust settings and flash firmware from their cell phone using the Speedy Bee App.  Check your tune, adjust PIDS, analyze blackbox recordings all on your phone. No longer do you need to lug around a laptop.  \u003c\/p\u003e\n\u003cp\u003eThe flight controller itself is packed with all the latest tech. The F7 MCU insures lightning fast response, powerful MPU6000 gyro, built-in OSD, barometer, and even full plug and play support for DJI Air Unit. This is a full featured beast.\u003c\/p\u003e\n\u003cp\u003eAvailable individually or in a \u003ca href=\"https:\/\/www.defiancerc.com\/products\/speedy-bee-f7-45a-stack-v2\" title=\"Speedy Bee Stack\" target=\"_blank\"\u003eStack\u003c\/a\u003e with the \u003ca href=\"https:\/\/www.defiancerc.com\/products\/speedy-bee-45a-blheli_32-4-in-1-esc\" title=\"Speedy Bee 45A ESC\" target=\"_blank\"\u003eSpeedy Bee 45A BLHeli_32 4-In-1 ESC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DOvsFWfzzls\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F722\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000\u003c\/li\u003e\n\u003cli\u003eUSB: Type-C\u003c\/li\u003e\n\u003cli\u003eBaro: BMP280 (I2C)\u003c\/li\u003e\n\u003cli\u003eOSD: BetaFlight OSD w\/ AT7456E chip\u003c\/li\u003e\n\u003cli\u003eBLE: Support, used for Flight Controller configuration\u003c\/li\u003e\n\u003cli\u003eWiFi: Support, used for data transfer, e.g firmware flashing, and Blackbox analysis.\u003c\/li\u003e\n\u003cli\u003eDJI Air Unit slot: A full DJI Air Unit JST slot onboard\u003c\/li\u003e\n\u003cli\u003eBlackBox: 16MB onboard dataflash\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: 1 : 10 (Scale 168)\u003c\/li\u003e\n\u003cli\u003eBetaFlight Camera Control Pad: Yes\u003c\/li\u003e\n\u003cli\u003ePower input: 3S - 6S Lipo\u003c\/li\u003e\n\u003cli\u003e5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1 (the maximum load current is 2.5A)\u003c\/li\u003e\n\u003cli\u003e9V power output 2 * 9V output, 1 pads and another one used for DJI slot\u003c\/li\u003e\n\u003cli\u003e4.5V power output: 1 * 4.5V output pad\u003c\/li\u003e\n\u003cli\u003e3.3V power output: 1 * 3.3V output pad, the maximum load current is 500mA.\u003c\/li\u003e\n\u003cli\u003eESC signal: M1 - M4\u003c\/li\u003e\n\u003cli\u003eUART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)\u003c\/li\u003e\n\u003cli\u003eESC Telemetry UART: UART4 RX\u003c\/li\u003e\n\u003cli\u003eI2C: Used for external Magnetometer, Sonar, etc.\u003c\/li\u003e\n\u003cli\u003eLED pin Used for WS2812 LED\u003c\/li\u003e\n\u003cli\u003eBuzzer: BZ+ and BZ- pad used for 5V Buzzer\u003c\/li\u003e\n\u003cli\u003eBoot button: Used to easy enter DFU mode\u003c\/li\u003e\n\u003cli\u003eRSSI input: RSSI input solder pad\u003c\/li\u003e\n\u003cli\u003eSmartPort: Use any TX pad of UART for the SmartPort feature.\u003c\/li\u003e\n\u003cli\u003eSupport Flight Controller Firmware: BetaFlight(Default), EMUFlight\u003c\/li\u003e\n\u003cli\u003eTarget name: SPEEDYBEEF7V2\u003c\/li\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, 4mm hole size\u003c\/li\u003e\n\u003cli\u003eDimension: 41 x 38 x 6.9mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-02-1.jpg?v=1616859665\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-03.jpg?v=1616859695\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-04-2.jpg?v=1616859717\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-05-1.jpg?v=1616859737\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-07-1.jpg?v=1616859758\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-08-1.jpg?v=1616859778\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-09.jpg?v=1616859791\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK_MANUAL1-1.jpg?v=1616859813\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/FC_V2.jpg?v=1616859907\" alt=\"Speedy Bee F7 V2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/WG-SBF7V2.jpg?v=1616859827\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/FC.jpg?v=1616861083\" alt=\"Speedy Bee F7 FC V2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x Speedy Bee F7 V2 Flight Controller\u003c\/p\u003e","brand":"Speedy Bee","offers":[{"title":"Default Title","offer_id":39282010128453,"sku":"","price":52.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Speedy_Bee_F7_V2_Flight_Controller_With_Built_In_WiFi_and_Bluetooth_9.jpg?v=1658200039"},{"product_id":"speedy-bee-f7-45a-stack-v2","title":"Speedy Bee F7 45A Stack V2","description":"\u003cp\u003eThe Speedy Bee Stack is the world’s first F7 flight controller and true 45A ESC that is capable of being configured, flashed, and have its blackbox analyzed all wirelessly with a smartphone.  Want to change motor directions?  You can do so in the App. Want to tune your PIDS?  You can do so in the App.  Want to analyze how the changes you just made affects your flight?  You can do so all wirelessly in the Speedy Bee App.  Fantastic versatility and convenience. You can leave your laptop at home. \u003c\/p\u003e\n\u003cp\u003eBuilt with the finest components.  Both the FC and ESC boast industry leading features and specs.  F7 MCU, barometer, built-in OSD, direct plug and play with DJI Air Unit, true 45A continuous, high-quality MOSFETs, etc. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso available individually - \u003c\/span\u003e\u003ca title=\"Speedy Bee F7 V2 Flight Controller\" href=\"https:\/\/www.defiancerc.com\/products\/speedy-bee-f7-v2-flight-controller-with-built-in-wifi-and-bluetooth\" target=\"_blank\"\u003eSpeedy Bee F7 V2 Flight Controller\u003c\/a\u003e - \u003ca title=\"Speedy Bee 45A ESC\" href=\"https:\/\/www.defiancerc.com\/products\/speedy-bee-45a-blheli_32-4-in-1-esc\" target=\"_blank\"\u003eSpeedy Bee 45A BLHeli_32 4-In-1 ESC\u003c\/a\u003e\u003c\/p\u003e\n\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/DOvsFWfzzls\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF7 V2 Flight Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F722\u003c\/li\u003e\n\u003cli\u003eIMU: MPU6000\u003c\/li\u003e\n\u003cli\u003eUSB: Type-C\u003c\/li\u003e\n\u003cli\u003eBaro: BMP280 (I2C)\u003c\/li\u003e\n\u003cli\u003eOSD: BetaFlight OSD w\/ AT7456E chip\u003c\/li\u003e\n\u003cli\u003eBLE: Support, used for Flight Controller configuration\u003c\/li\u003e\n\u003cli\u003eWiFi: Support, used for data transfer, e.g firmware flashing, and Blackbox analysis.\u003c\/li\u003e\n\u003cli\u003eDJI Air Unit slot: A full DJI Air Unit JST slot onboard\u003c\/li\u003e\n\u003cli\u003eBlackBox: 16MB onboard dataflash\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: 1 : 10 (Scale 168)\u003c\/li\u003e\n\u003cli\u003eBetaFlight Camera Control Pad: Yes\u003c\/li\u003e\n\u003cli\u003ePower input: 3S - 6S Lipo\u003c\/li\u003e\n\u003cli\u003e5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1 (the maximum load current is 2.5A)\u003c\/li\u003e\n\u003cli\u003e9V power output 2 * 9V output, 1 pads and another one used for DJI slot\u003c\/li\u003e\n\u003cli\u003e4.5V power output: 1 * 4.5V output pad\u003c\/li\u003e\n\u003cli\u003e3.3V power output: 1 * 3.3V output pad, the maximum load current is 500mA.\u003c\/li\u003e\n\u003cli\u003eESC signal: M1 - M4\u003c\/li\u003e\n\u003cli\u003eUART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)\u003c\/li\u003e\n\u003cli\u003eESC Telemetry UART: UART4 RX\u003c\/li\u003e\n\u003cli\u003eI2C: Used for external Magnetometer, Sonar, etc.\u003c\/li\u003e\n\u003cli\u003eLED pin Used for WS2812 LED\u003c\/li\u003e\n\u003cli\u003eBuzzer: BZ+ and BZ- pad used for 5V Buzzer\u003c\/li\u003e\n\u003cli\u003eBoot button: Used to easy enter DFU mode\u003c\/li\u003e\n\u003cli\u003eRSSI input: RSSI input solder pad\u003c\/li\u003e\n\u003cli\u003eSmartPort: Use any TX pad of UART for the SmartPort feature.\u003c\/li\u003e\n\u003cli\u003eSupport Flight Controller Firmware: BetaFlight(Default), EMUFlight\u003c\/li\u003e\n\u003cli\u003eTarget name: SPEEDYBEEF7V2\u003c\/li\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, 4mm hole size\u003c\/li\u003e\n\u003cli\u003eDimension: 41 x 38 x 6.9mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e45A BLHeli_32 ESC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirmware: BLHeli32 SpeedyBee 4in1\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F051\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 45A * 4\u003c\/li\u003e\n\u003cli\u003eBurst Current: 55A(10S)\u003c\/li\u003e\n\u003cli\u003eESC Protocol: DSHOT300\/600\/1200\u003c\/li\u003e\n\u003cli\u003ePower input: 3S - 6S LiPo\u003c\/li\u003e\n\u003cli\u003ePower output: VBAT\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Support (Scale 168)\u003c\/li\u003e\n\u003cli\u003eESC Telemetry: Support\u003c\/li\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, 4mm hole size\u003c\/li\u003e\n\u003cli\u003eDimension: 41 * 45 * 6.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-01-2.jpg?v=1616860448\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-02-1.jpg?v=1616859665\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-03.jpg?v=1616859695\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-04-2.jpg?v=1616859717\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-05-1.jpg?v=1616859737\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-07-1.jpg?v=1616859758\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-08-1.jpg?v=1616859778\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-09.jpg?v=1616859791\" alt=\"Speedy Bee F7 V2 Flight Controller\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee 45A BLHeli_32 4-In-1 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/F4B16380-99C6-43CE-B326-CCC0560416EE.jpg?v=1616822874\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Speedy Bee 45A ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-11-1_6f984936-bd0f-4a63-ab33-e0d5fc53f427.jpg?v=1616859046\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zW4U5XXIQjU\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee 45A BLHeli_32 ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-12-4.jpg?v=1616859069\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee BLHeli_32 45A ESC\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK-13.jpg?v=1616859094\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/fcstack-dim.jpg?v=1616860554\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK_MANUAL1-1.jpg?v=1616859813\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/SB-STACK_MANUAL2.jpg?v=1616859113\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack Wiring Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/WG-SBF7V2.jpg?v=1616859827\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Speedy Bee Stack\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/Stack.jpg?v=1616860725\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x SpeedyBee F7 V2 Flight Controller\u003cbr\u003e1x SpeedyBee 45A BLHeli_32 4-In-1 ESC\u003cbr\u003e1x Parts Set\u003c\/p\u003e","brand":"Speedy Bee","offers":[{"title":"Default Title","offer_id":39282062131269,"sku":"","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/products\/Speedy_Bee_F7_45A_Stack_V2_6.jpg?v=1658201653"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/collections\/IMG_9833c.jpg?v=1613333447","url":"https:\/\/www.defiancerc.com\/collections\/flight-controller\/category_4-in-1-esc.oembed?page=3","provider":"defianceRC","version":"1.0","type":"link"}