{"product_id":"itsfpv-era-5-5-inch-dc-o4-frame-kit","title":"itsFPV ERA 5.5-Inch DC O4 Frame Kit","description":"\u003cp\u003eSame ERA DC. Same deadcat geometry. Built specifically for the DJI O4 Pro camera with stock plastic housing. The larger O4 camera required a redesigned cage and an extended front bottom plate. Everything else stays the same.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame kit only\u003c\/strong\u003e: Electronics, ELRS antenna holder, and action cam mounts are not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO4 Pro version\u003c\/strong\u003e: This frame is for DJI O4 Pro with stock plastic camera housing ONLY.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor variance\u003c\/strong\u003e: SLS nylon color can vary slightly between production batches. Your cage may be lighter or darker than shown in the photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Cinematic Cage (O4)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe O4 cage is manufactured through SLS (Selective Laser Sintering), not injection molding. Same nylon polymer, different process. SLS doesn't match the impact resistance of our injection-molded cages, but for cinematic work that's not the point. You're not hitting concrete walls. You're flying smooth lines.\u003c\/p\u003e\n\u003cp\u003eWant props out of frame AND carefree bashing? Check out ERA Mini 3.5\" (zero props on O4 Pro) or pair the standard ERA DC with our CNC Conversion Kit for injection-molded durability.\u003c\/p\u003e\n\u003cp\u003eGoPro-style mounting system with a titanium M5 bolt. Stepless angle adjustment from -10° to 45°. No click-stops, no fixed increments. Set your angle with a 2.5mm hex key and it stays locked. Every pilot already has that tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 5.5\" Props\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAction cams keep getting heavier. The new GoPro Mission 1 Pro lands at 208g, a 1-inch sensor cinema cam that weighs about a third more than a Hero 13 and several times what a naked cam does. Put that on a standard 5\" quad and you feel it in every corner, and flight times drop.\u003c\/p\u003e\n\u003cp\u003e5.5\" props give you the lift to carry a full-size GoPro without trading away the flight feel. More balanced, more responsive, longer flights. Still agile enough for dynamic lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeometry and Handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDeadcat layout pushes the front props out of your camera's field of view. No props in view, no post-cropping, no compromises on lens choice.\u003c\/p\u003e\n\u003cp\u003eThe longer top plate shifts weight distribution for better balance with front-mounted action cams. The result: smooth, predictable handling for tracking shots and proximity work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterlock V2 arm system. Arms lock in with a form fit, secured with a single screw. No slop, no play. Easy to swap if you ever need to.\u003c\/p\u003e\n\u003cp\u003eSplit deck design saves weight without losing rigidity. The cage bridges the structure, stiffening the entire chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Standards\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSame standards as ERA. No shortcuts. T700\/T800 carbon mix with chamfered edges where it matters. 12.9 Grade YFS steel screws that don't strip. 7075 aluminum standoffs that don't bend. Titanium M5 bolt for the action camera mount – light, strong, won't seize.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Different On the O4 Version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eO4 Cinematic Nylon Cage:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eRedesigned for the larger DJI O4 Pro camera. SLS manufactured from the same nylon polymer.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Bottom Plate Front:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLonger carbon plate to match the O4 cage dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdated 3D Prints:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eO4 VTX Dual Antenna Holder, new TPU camera inserts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it carry a full-size GoPro?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GoPro-style mount and 5.5\" props are built for full-size action cams, all the way up to the 208g GoPro Mission 1 Pro. Lighter and naked cams fit too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 5.5\" the same as a 5-inch frame?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt flies like a 5\". Same agility, same feel. The extra prop disc just gives you the lift to carry a heavier camera and hold your flight time. A 5\" that doesn't bog down under a full GoPro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the standard ERA DC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is sized for the DJI O4 Pro with its stock plastic housing. The cage and front bottom plate are larger to fit the O4 camera. If you run O3, Vista, or Walksnail, or converted your O4 with our CNC kit, get the Standard 5.5-Inch DC ERA instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandoffs:  7075 Aluminum\u003c\/li\u003e\n\u003cli\u003eFrame Geometry:  Deadcat\u003c\/li\u003e\n\u003cli\u003eHardware:  12.9 Hardened Steel\u003c\/li\u003e\n\u003cli\u003eProp Clearance:  Fits up to 5.5\" Props\u003c\/li\u003e\n\u003cli\u003eWheelbase:  238mm\u003c\/li\u003e\n\u003cli\u003eStack Mounting:  30.5x30.5mm | 20x20mm\u003c\/li\u003e\n\u003cli\u003eMotor Mounting:  16x16mm\u003c\/li\u003e\n\u003cli\u003eCamera Mounting:  Up to 20x20mm\u003c\/li\u003e\n\u003cli\u003eVTX Mounting:  20x20mm | 25.5x25.5mm\u003c\/li\u003e\n\u003cli\u003eCarbon:  T700\/T800 | Up to 55% Stronger Than Typical FPV Frames\u003c\/li\u003e\n\u003cli\u003eCamera Cage:  SLS Nylon | Cinematic Protection\u003c\/li\u003e\n\u003cli\u003eBattery Straps:  Nylon-Kevlar | Won't Snap on Impact\u003c\/li\u003e\n\u003cli\u003eLiPo Pad:  Super Sticky | Keeps Battery In Place\u003c\/li\u003e\n\u003cli\u003eCable Protectors:  Injection-molded | Protects Motor Wires\u003c\/li\u003e\n\u003cli\u003eAction Camera Angle:  GoPro Style | Stepless -10° to 45°\u003c\/li\u003e\n\u003cli\u003eTitanium Bolt:  M5 | Light, Strong, 2.5mm Hex\u003c\/li\u003e\n\u003cli\u003eMotor Bell Protection:  Three Point Motor Bell Protection\u003c\/li\u003e\n\u003cli\u003eSkids:  Injection-molded Nylon | Protects Arms On Landing\u003c\/li\u003e\n\u003cli\u003eArm Swap:  One Screw Arm Swap\u003c\/li\u003e\n\u003cli\u003eAction Cam Swap:  One Screw Action Camera Swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/EiuadM3NnG4?si=dKi7cRNn17hzUrmw\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003cbr\u003e\u003c\/strong\u003e1x itsFPV ERA 5.5-Inch DC O4 Frame Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSLS Manufactured\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1X Nylon Cinematic Camera Cage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInjection-Molded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x Skids\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x O4 Bottom Plate Front CF 2.5mm T800\u003c\/li\u003e\n\u003cli\u003e1x Bottom Plate Back CF 2mm T700\u003c\/li\u003e\n\u003cli\u003e2x Front Arms CF 6mm T700\u003c\/li\u003e\n\u003cli\u003e2x Back Arms CF 6mm T700\u003c\/li\u003e\n\u003cli\u003e2x Back Arm Braces CF 6mm T700\u003c\/li\u003e\n\u003cli\u003e1x Arm Connector CF 2mm T700\u003c\/li\u003e\n\u003cli\u003e1x Top Plate CF 2mm T700\u003c\/li\u003e\n\u003cli\u003e1x Interlock V2 CF T700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3D-Printed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x O4 TPU Camera Inserts\u003c\/li\u003e\n\u003cli\u003e1x AWG14 + 1x AWG12 Lead Holder\u003c\/li\u003e\n\u003cli\u003e1x O4 Dual VTX Antenna Holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x 20mm Standoffs 7075\u003c\/li\u003e\n\u003cli\u003e1x Hardware Set\u003c\/li\u003e\n\u003cli\u003e1x Titanium M5 Bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMiscellaneous\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Super Sticky LiPo Pad\u003c\/li\u003e\n\u003cli\u003e2x Nylon-Kevlar Battery Straps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"itsFPV ERA 5.5 Inch DC Frame Kit Assembly Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/ERA_DC_Assembly_Guide.pdf?v=1781316230\"\u003eDownload Assembly Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"itsFPV","offers":[{"title":"Default Title","offer_id":45148387967045,"sku":null,"price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1349\/4827\/files\/itsFPV-ERA-5-5-Inch-DC-O4-Frame-Kit-185.webp?v=1781317082","url":"https:\/\/www.defiancerc.com\/products\/itsfpv-era-5-5-inch-dc-o4-frame-kit","provider":"defianceRC","version":"1.0","type":"link"}