The AtomRC Swordfish is a 1200mm wingspan V-tail plane set up with twin motors in tractor configuration. The large V-tail improves the cruising speed stability, the aerodynamic shape and low cross-sectional area reduce flight resistance and improve endurance. The use of plastic injection parts help to reduce weight and size and also improve strength.
This plane is built for FPV, intelligent flight. The RTH version includes a flight controller with support for either iNav or arduplane. Pre-tuned and ready to go.
The fuselage and wings are embedded with reinforced carbon tubes to maximize the
torsional rigidity of the wing during flight and the structural strength of the tail connection.
This helps improve the feel and control precision of flight. The belly wheel and the tail skid protect the bottom of the fuselage during landings.
There is plenty of room inside the fuselage for all your gear. There is support for analog systems as well as DJI Air Unit and other HD systems. Expect 1000g±200g take-off weight.
Available in three versions:
- Kit: Foam and Plastic Parts
- PNP: Kit + Motor + ESC + Servos
- RTH: PNP + Flight Controller
- Wingspan: 1200mm
- Length: 810mm
- Material: EPP
- Wing Area: 15.35 dm²
- Recommended Motor: 2004~2306
- Recommended Props: 7045
- Recommended Battery: 4S 5000mAh/21700 1P4S
- Servos: 4PCS 9g
Precision Plastic injection molded parts include wing connector, motor mount, VTX mount, V-tail base and LED light covers.
1x AtomRC Swordfish 1200mm Fixed Wing FPV Airplane
- Pre-glued Wings
- Wood Plates
- Screws and Nuts
- Sticker and user manual
- Quick Release Connector
- LED Lights
- All content in KIT
- 2x Motor - AtomRC 2306 2000KV
- 2x AtomRC BLS 30A 2-4S
- 4x AtomRC 9g Servos
- 4x 7040-2 Propellers
- All content in PNP
- AtomRC F405 NAVI Flight Controller