Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone

Are you tired of the power performance of the 1S whoop you own? Do you want more power to ripping and roaring in your backyard? Yes, here comes Mobula8, which is Happymodel’s first attempt on an 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motor, and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.

Features:

• X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0
• Onboard OPENVTX 5.8GHz 0mw~400mW VTX
• ELRS V2.0 (Default), provides firmware to support ELRS V3.0
• EX1103 KV11000 motors
• CaddxFPV Ant FPV camera 1200TVL
• Gemfan Hurricane 2023 tri-blade propellers
• Smooth and powerful
• Compatible with 1S-2S Lipo/LiHV battery
• Recommend 2S 450mah/550mah/650mah battery (Not included)

Specifications:

• Brand Name: Happymodel
• Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
• Wheelbase: 85mm
• Size: 120mm*120mm*50mm
• Weight: 43g
• 2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0)

EX1103 KV11000 MOTOR

• Mode: EX1103 KV11000
• Configu-ration:9N12P
• Stator Diamter:11mm
• Stator Length:3mm
• Shaft Diameter:Φ1.5mm
• Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
• Weight(g):3.8g
• No.of Cells(Lipo):1-2S

FLIGHT CONTROLLER

• X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: ICM20689 or ICM42688P(SPI connection)
• Mount hole size: 25.5mm*25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) Blheli_S 4in1 ESC
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G OpenVTX 0mw~400mw
• Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
• Built-in voltage detection
• Built-in current sensor

ONBOARD 4-IN-1 ESC

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeliSuite programmable
• Firmware target: Z_H_30
• Default protocol: DSHOT300
• Support Bluejay firmware

ONBOARD SPI EXPRESSLRS 2.4GHZ RECEIVER

• Packet Rate option: 50Hz/150Hz/250Hz/500Hz
• ExpressLRS Firmware version: V2.0
• RF Frequency: 2.4GHz
• Antenna : SMD antenna
• Telemetry output Power: <12dBm
• Receiver protocol: SPI ExpressLRS
• Compatible with ExpressLRS V2.0 TX Module
• Couldn’t flash separately ExpressLRS firmware
• Could flash FC firmware to support ExpressLRS v3.0 TX module

ONBOARD 5.8GHZ OPENVTX

• Firmware version: OPENVTX
• Smartaudio v2.1
• PIT Mode support
• RCE Mode support
• Channels:48ch
• Transmitting Power: 0/RCE/25mw/100mw/400mw
• Power supply: DC 5V
• Current (5v): <650ma (400mw)

CADDX ANT 1200TVL CAMERA

• Image Sensor: 1/3″ CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC or PAL
• IMAGE: 16:9 or 4:3
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio : >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm
• Min. Illumination: 0.001Lux@F1.2
• Auto Gain Control: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14*14mm(with bracket to 19*19mm)
• Wide Power Input: DC 3.7-18V
• Weight: 2g (N.W.)

Includes:
1x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone