Armattan Rooster Frame
Armattan, world-renowned for their lifetime warranty, comes the latest frame - the Rooster! From the same designer as the popular Armattan Chameleon, the Rooster features some of the same design concepts but takes it to another level.
When the Armattan Chameleon was released a year ago, it took the multirotor community by storm. And while the minds behind it were relieved that the design was successful, they didn't stop there. Comments and suggestions came in, and the team kept looking for any way they could improve upon the formula. It took months of development and testing, but it's paid off.
The Armattan Rooster is a compressed-x, freestyle frame. At first glance, it may seem similar to the Chameleon, but if you look carefully, almost nothing beyond the shape is the same.
Armattan developed a new carbon fiber weave in conjunction with this frame. It still has some spring, but is much less likely to delaminate in a high impact. Another change is that the camera cage is now grade 5 titanium. By moving to a slightly more expensive material, Armattan has doubled the strength of the camera cage at the same mass as the Chameleon's.
You can fly safely with your cam anywhere from 25 to 60 degrees. In addition, the center-point of the camera has been lowered in comparison to the Chameleon. Now your rolls will show less vertical distortion as you bang the sticks. The metal of the cage was also stretched from 4x4mm to 6x2mm to allow for the use of M3 hardware. This is something that certainly would not have been possible without the incorporation of titanium. The Rooster comes in just under what the Chameleon weighs.
The swappable arms are clear of the center-stack, providing you with a couple extra millimeters of stack height while maintaining a 20mm deck height. This also allows you to make upgrades or change a broken arm without needing to unscrew the FC.
Did you just say warranty? **
You want it? You got it. If you cock up your frame you can rest assured knowing that Armattan's legendary lifetime-warranty has got you from your aluminum tail-feathers to your titanium head. That's a promise.
Specifications:
- Frame Weight: approx 125 grams
- Motor to Motor: 230mm @ 5in, 253mm @ 6in
- Frame Shape: Compressed X
- Main Plate: Thickness 4mm
- Arm Thickness: 4mm
- Hardware: Stainless Steel Bolts, Titanium Cage, Aluminum Standoffs
- Motor Mount Pattern: 22xx
- Center Stack Mount: 30.5mm
- FPV Camera Mount: 28.5mm (Swift v2, Arrow v3, etc)
- Max Stack Height: 22mm
- Warrantied Parts: All **
Recommended Components
- Motor Size: 2306/2450kv
- ESCs: 30a
- Prop Size: 5" or 6"
- LiPo: 4-5S/1300mAh
Includes:
Titanium:
2x Camera-cage braces
Hardware:
6x 4mm flat-head M3 bolts
8x 6mm flat-head M3 bolts
3x 8mm flat-head M3 bolts
3x 10mm flat-head M3 bolts
10x 12mm flat-head M3 bolts
10x M3 sunk-nuts
10x Nylock M3 nuts
16x 6mm M3 button-head (motor) bolts
6x 8mm M2 cup-head (camera) bolts
Aluminum:
1x 28.6 Front standoff (silver)
2x Rear standoffs (black)
Nylon:
5x 6mm standoffs
5x nuts
5x 16mm button-head M3 bolts
Carbon Fiber:
1x 2mm Top (LiPo) plate
1x 1.5mm HD Cam plate
1x 1.5mm Small front (top) plate
1x 1.5mm Small rear (top) plate
1x 2mm Rear VTX plate (Standard or TBS)
1x 4mm Main plate
4x 4mm Arms - 5 inch or 6 inch
Other:
1x Lipo strap
1x LiPo foam pad
1x HD camera foam pad
4x Dog-bone landing pads
1x Molded rubber SMA grommet (only included with standard VTX plate)
3x Molded rubber antenna tube mounts (only included with standard VTX plate)
** Life-Time Warranty Details **
All warranty claims are handled by Armattan directly. You can submit a claim to Defiance RC for screening if you wish. We will help as much as possible.
- In order to be considered for a warranty on the above models, a proof of purchase will be necessary, no exceptions.
- Warranties will only be issued to original owners only.
Please submit a photo showing a handwritten note with the information requested, signed and dated in view of the damage.
1. Full Name
2. Today's Date
3. Date of Purchase or Order number
4. The issue that you experienced with arrows pointing to the problem area(s)
5. Name of broken part
6. Customer's Signature
The broken part(s) need to be installed on the frame (no need to take it all apart). Please send pictures of the damage before you take anything apart or else your warranty claim may not be approved. Show the carnage first, and after that, you can take it apart and send pics of individual parts. Your product photo should have a physical paper note in the same frame containing the six steps (not a digital alteration).
Please include the following pictures:
- 1 photos of damaged part still attached to quad as normal with sheet
- 2 photos of part removed (top and bottom view)
- customer needs to scratch up the part and take two more photos (top and bottom)
