Holybro Tekko32 F3 4-In-1 Metal 65A ESC
** Discontinued - New Version Here **
All-new premium BLHeli_32 ESC from Holybro with F3 MCU, provides smoother control and faster response time. Built with metal case MOSFETs for better heat dissipation. Tested in short bursts up to 220A in total. The actual performance will only be limited by airflow.
- F3(M4 Core) MCU, Runs BLHeli_32 firmware, the MCU works at 108Mhz
- The 4-In-1 has an onboard analog current sensor, and TLM function (then no current reading over TLM)
- Built using metal case MOSFETs for better heat dissipation
- Supports Lipo 4-6S
- Ext. cap needed for 6s (470uf 35v for 6s usage.)
- Size:42 x 42 mm
- Mounting holes:30.5×30.5mm
- Weight: 12g
Airflow is very important if you want to run this 4-In-1 in high current.
The input cable(from lipo to 4-In-1), should be at least 12AWG
Please use non-metallic isolation standoffs (marked in red in the diagram above) for the mounting holes on the ESC, Because mounting holes and motor pad are connected.
1x Holybro Tekko32 F3 Metal 65A 4in1 ESC
1x Electrolytic capacito: 470uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable