KISS Flight Controller - 32bit V1.03
KISS FC - 32bit Flight Controller V1.03
As we felt the need for a modern more simplified 32bit Flight Controller, we made the KISS FC, which includes custom Flight Control Firmware development that gets rid of some old ballast, this took some time, but the result is very pleasing.
The Idea was to simplify some things and due to intensive long term testings by some fantastic Pilots we were able to optimize firmware code to a point where you are able to hopefully get your quad in the air quick and have it perform the way you want. Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well known Pilots for given configurations and of course can tweak PIDs yourself over the GUI.
The software setup side is reduced as much as we can, many things are already taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick. A new feature is also the built in telemetry, in combination with our 32bit ESC line, its possible to show live telemetry data via OSD on your FPV live feed or in the KISS FC GUI. This way you get useful information like the Voltage of your battery, current consumption, ESC temperature and motor RPM.
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Supported RX types:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- classic RX with single channel outputDriver for STM32F303CCT6
Supported copter types:
- Quad +/x
- Hexa +/x
Changes in V1.03:
- changed bootloader solderpads to a press button
- changed USB Port type
1x KISS 32bit Flight Controller