Matek F405-MiniTE Flight Controller

  • $59.99
    Unit price per 


The F405-MiniTE is a 20x20 flight controller with all the features, performance, and quality users have come to expect from Matek.  Comes with a mounting board to convert to 30x30.


  • F405 has 1MB flash which can run with ArduPilot, even with INAV firmware.
  • Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
  • Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
  • Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV/BF multirotor mixer
  • InvenSense GEN3 IMU ICM42605
  • Supports both 20x20 and 30.5x30.5mm mounting


  • MCU: STM32F405RGT6
  • IMU: ICM42605
  • OSD: AT7456E
  • Baro: Goertek SPL06-001 (I2C)
  • Blackbox: 16M-byte Flash memory
  • 6x UARTs,  1x Softserial_Tx option
  • 12x PWM outputs (8x Dshot)
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, Airspeed)
  • 2x PINIO
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Dual BEC, 5V 1.7A & 10V 1.4A
  • Input:  6~30V (2-6S)
  • 10V output ON/OFF switchable
  • Convertible 20mm to 30.5mm mounting
  • Current Sensor:  No
  • Dimensions:  28x28mm
  • Weight:  5g


  • ArduPilot: MatekF405-TE
  • INAV: MATEKF405TE (not available in INAV configurator for now)
  • BetaFlight: MATEKF405TE

Matek F405-MiniTE Flight Controller

1x Matek F405-MiniTE Flight Controller
1x 20mm to 30.55 Conversion Plate (blue PCB)
6x Silicon Grommets M4 to M3
6x Brass Grommets M3 to M2
1x SH1.0_8pin cable 5 cm
1x SH1.0_6pin to GH1.25_8pin cable 8cm

Download Wiring Diagram

Matek F405-MiniTE Specs and Wiring

We Also Recommend