Matek H743-Slim H7 30x30 Flight Controller V1.5

  • $69.99
    Unit price per 

 

The Matek H743-Slim V1.5 is a powerful flight controller using the HSTM32H743VIT6 MCU running at 480MHz. It is matched with dual gyros ( MPU6000 & ICM42605 ), an Infineon DPS310 barometer, and up to 13 PWM outputs. Measuring 36x36x5mm, this is a full-featured and very worthy choice for anyone looking for a flight controller that can work on quads or wings.

Specifications:

  • MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
  • IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
  • Baro: Infineon DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card socket (SDIO)
  • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
  • 13x PWM outputs (including “LED” pad)
  • 2x I2C
  • 1x CAN
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1x SPI3 breakout
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
  • 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
  • Dual Camera Inputs switch
  • 5V/Vbat filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
  • Mounting:
    • 30.5 x 30.5/Φ4mm 
    • 30x5 x 30.5/Φ3mm with Grommets
  • Dimensions:  36x36x5mm
  • Weight:  7g

Power:

  • Vbat Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • No Current Sensor built-in
  • ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
  • Static power: 200mA@5V with Betaflight,  150mA@5V with ArduPilot

Firmware:

  • ArduPilot:  MATEKH743
  • BetaFlight:  MATEKH743
  • INAV:  MATEKH743

Includes:
1x Matek H743-Slim H7 30x30 Flight Controller V1.5
6x Silicon Grommets M4 to M3
1x JST-SH1.0_8pin cable, 5cm
2x JST-SH1.0_8pin Connectors
1x JST-GH-4P to JST-GH-4P Cable for CAN Port, 20cm

Download Wiring Diagram


We Also Recommend