ZeeZ Design F7 Betaflight Flight Controller
Zeez Design is a new outfit designing products for the FPV community. Zeez Design project was born in Italy in early 2016 from FPV racing pilots and students of the Engineer University of Bologna that wanted to develop their own gear for racing drones. The ZeeZ F7 flight controller is their first product.
The ZeeZ F7 was designed for easy assembly with common VTX/RX, resulting in clean, low profile stacks. The FC fits perfectly on top of the ZeeZ Design 60Amp 4-In-1 ESC for clean wiring and ease of assembly.
- Up to 8S input (max 36V)
- 5V BEC up to 3A continuous
- STM32F722 MCU
- MPU6000 Gyro/ACC for smooth performance
- 128MB OnBoard flash
- OSD chip Onboard
- 6 available UARTS
- VTX switch to control the ON/OFF of the VTX
- directly from your transmitter
- LC Filter for 5V VTX
- USB Type C connector
- Onboard RGB LED distribution for clean wiring to the LED on the arm of the quad.
- Notch design on sides and in the front of the – FC for better fitting on the frame.
LED System Specifications:
- Zeez LED System includes 4 strips of RGB LED lights
- 10 RBG LED Per Strip
- Max Current Draw (10 led on white colour): 0.6A @ 5V
- Easy wiring to Zeez F7 Flight controller and easy control with BetaFlight
- Dimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)
1x Zeez F7 Flight Controller
4x Aluminum Standoff
4x Aluminum Nut
2x ESC to Flight Controller 8 Pin JST SH 1.00mm connector
2x 2.00mm Header Pin for VTX connection
2x 2.54mm Header Pin for Receiver connection
2x Spare M3 rubber anti-vibration for Flight Controller
LED Combo includes 4x Zeez LED Strips