Speedy Bee F7 45A Stack V2

  • $109.99
    Unit price per 

 

The Speedy Bee Stack is the world’s first F7 flight controller and true 45A ESC that is capable of being configured, flashed, and have its blackbox analyzed all wirelessly with a smartphone.  Want to change motor directions?  You can do so in the App. Want to tune your PIDS?  You can do so in the App.  Want to analyze how the changes you just made affects your flight?  You can do so all wirelessly in the Speedy Bee App.  Fantastic versatility and convenience. You can leave your laptop at home. 

Built with the finest components.  Both the FC and ESC boast industry leading features and specs.  F7 MCU, barometer, built-in OSD, direct plug and play with DJI Air Unit, true 45A continuous, high-quality MOSFETs, etc. 

Also available individually - Speedy Bee F7 V2 Flight Controller - Speedy Bee 45A BLHeli_32 4-In-1 ESC

Specifications:

F7 V2 Flight Controller

  • MCU: STM32F722
  • IMU: MPU6000
  • USB: Type-C
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE: Support, used for Flight Controller configuration
  • WiFi: Support, used for data transfer, e.g firmware flashing, and Blackbox analysis.
  • DJI Air Unit slot: A full DJI Air Unit JST slot onboard
  • BlackBox: 16MB onboard dataflash
  • Current Sensor: 1 : 10 (Scale 168)
  • BetaFlight Camera Control Pad: Yes
  • Power input: 3S - 6S Lipo
  • 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1 (the maximum load current is 2.5A)
  • 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
  • 4.5V power output: 1 * 4.5V output pad
  • 3.3V power output: 1 * 3.3V output pad, the maximum load current is 500mA.
  • ESC signal: M1 - M4
  • UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
  • ESC Telemetry UART: UART4 RX
  • I2C: Used for external Magnetometer, Sonar, etc.
  • LED pin Used for WS2812 LED
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer
  • Boot button: Used to easy enter DFU mode
  • RSSI input: RSSI input solder pad
  • SmartPort: Use any TX pad of UART for the SmartPort feature.
  • Support Flight Controller Firmware: BetaFlight(Default), EMUFlight
  • Target name: SPEEDYBEEF7V2
  • Mounting: 30.5 x 30.5mm, 4mm hole size
  • Dimension: 41 x 38 x 6.9mm
  • Weight: 9g

45A BLHeli_32 ESC

  • Firmware: BLHeli32 SpeedyBee 4in1
  • MCU: STM32F051
  • Continuous Current: 45A * 4
  • Burst Current: 55A(10S)
  • ESC Protocol: DSHOT300/600/1200
  • Power input: 3S - 6S LiPo
  • Power output: VBAT
  • Current Sensor: Support (Scale 168)
  • ESC Telemetry: Support
  • Mounting: 30.5 x 30.5mm, 4mm hole size
  • Dimension: 41 * 45 * 6.5mm
  • Weight: 12.5g

Speedy Bee Stack

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee F7 V2 Flight Controller

Speedy Bee 45A BLHeli_32 4-In-1 ESC

Speedy Bee 45A ESC

Speedy Bee 45A BLHeli_32 ESC

Speedy Bee BLHeli_32 45A ESC

Speedy Bee Stack

Speedy Bee Stack

Speedy Bee Stack

Speedy Bee Stack Wiring Diagram

Speedy Bee Stack

Includes:
1x SpeedyBee F7 V2 Flight Controller
1x SpeedyBee 45A BLHeli_32 4-In-1 ESC
1x Parts Set


We Also Recommend