Matek F765-WSE Flight Controller

  • $79.99
    Unit price per 

 

** Discontinued - New Version Here **

Matek makes some of the best electronics for FPV and the F765-WSE Flight Controller is another option for your fixed wing or multirotor.  The F765-WSE has all the features a user needs, including a fast MCU, barometer, OSD chip, and 6.5 UARTS, 2 I2C, 1 CAN, and 12 PWM outputs.  Perfect for just about any fixed-wing project.

Specifications:

  • MCU: STM32F765VIH6, 216MHz , 512KB RAM, 2MB Flash
  • IMU: ICM42688-P (SPI4)
  • Baro: DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 6.5x UARTS (1,2,3,Rx5,6,7,8) with built-in inversion.
  • 1x Softserial1_Tx (INAV)
  • 12x PWM outputs (S1~S10 support Dshot)
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 2x I2C
  • 1x CAN
  • USB/Beep Extender with Type-C(USB2.0)
  • Dual Camera Inputs switch
  • 9V(12V) for VTX power switch
  • High-precision Current Sense, 220A range
  • ADC VB2 voltage divider: 1K:20K
  • ADC AirSpeed voltage divider: 20K:20K
  • Static power 160mA@5V

FC Firmware

  • INAV: MATEKF765SE
  • ArduPilot: MATEKF765SE

PDB

  • Input voltage range: 6.8~30V (2~6S LiPo)
  • 1x ESC power pads
  • Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)
  • Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
  • Sense resistor: 90A continuous, 220A peak

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps, Max.3A

BEC 9V /12V output

  • Designed for Video Transmitter, Camera, Gimbal ect.
  • Continuous current: 2 Amps, Max.3A
  • 12V option with Jumper pad
  • for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 8 Amps, Max.10A
  • for stable Vx output, input voltage should > Vx voltage +1V

BEC 3.3V output

  • Designed for Baro / Compass module and external 3.3V peripherals
  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 25 x 25mm, Φ2mm
  • Dimensions: 44 x 29 x 14.5 mm
  • Weight: 22g  w/ USB/buzzer adapter

Matek F765-WSE

Matek F765-WSE Layout

Matek F765-WSE WiringIncludes:
1x F765-WSE Flight Controller
1x USB(Type-C)/Beep (Passive buzzer) Extender
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins  (Board is shipped unsoldered)

Download Quick Start Guide


We Also Recommend