Matek F405-VTOL Flight Controller

  • $64.99
    Unit price per 
  • Save $5.01


Matek's F405-VTOL Flight Controller is a versatile, fully-featured FC that can manage multiple motors and servos.  Especially useful with VTOL models, which use servos for tilting motors during take-offs and landings.  Includes 6 UARTs, built-in PDB, barometer, OSD, and more. 


  • MCU: STM32F405RGT6, 168MHz , 1MB Flash
  • IMU: ICM42688-P
  • Baro: SPL06-001
  • OSD: AT7456E
  • Blackbox: MicroSD card slot
  • 6x UARTs,  1x Softserial_Tx option(INAV)
  • 12x PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, Airspeed)
  • 1x spare PINIO
  • USB/Beep Extender with Type-C(USB2.0)
  • Built-in inverter on UART2-RX for SBUS input
  • Switchable Dual Camera Input
  • Mounting:  25x25mm, Φ2mm, 35 x 35mm- Φ4mm
  • Dimensions:  45x42x15mm
  • Weight:  25g w/USB/Buzzer Adapter
  • BEC 5V Output
    • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
    • Continuous current: 2 Amps
  • BEC 9V/12V Output
    • Designed for Video Transmitter, Camera, Gimbal ect.
    • Continuous current: 2 Amps
    • 12V option with Jumper pad
    • for stable 9V/12V output, input voltage should > output voltage +1V
  • BEC Vx Output
    • Designed for Servos
    • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
    • Continuous current: 8 Amps,  10A Peak
    • for stable Vx output, input voltage should > Vx voltage +1V
  • BEC 3.3V Output
    • Designed for Baro / Compass module and external 3.3V peripherals
    • Linear Regulator
    • Continuous current: 200mA


  • Input voltage range: 6.8~30V (2~6S LiPo)
  • Sense resistor: 100A continuous, 220A peak
  • 5x ESC power pads, total 100A continuous
  • Support continuous load of up to 100A on ESC pad near the current sensor resistor
  • Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
  • Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
  • Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)


  • ArduPilot: MatekF405-TE
  • INAV: MATEKF405TE_SD (iNav 5.0 or newer)

1x Matek F405-VTOL Flight Controller
1x USB (Type-C)/Buzzer Extender
1x 20cm JST-SH-6P to JST-SH-6P Cable for Extender
1x 20cm JST-GH-4P to JST-GH-4P cable for I2C Port
1x Rubycon ZLH 35V 470uF Capacitor
Dupont 2.54 Pins 

Download Ardupilot Wiring Diagram

Download iNav Wiring Diagram

Download Quick Start Guide

We Also Recommend