ZeeZ Design F7 2020 Flight Controller
** Discontinued - New Version Here **
ZeeZ Design's small format F7 Flight Controller features 20x20 mounting holes, up to 8s input with 5V @3A BEC (protected from over-current, over-temperature, and short circuit) for powering all peripherals (such as CAM, VTX, LED, RX). Weighing in at only 7.25g and measuring 35.7mm x 30mm, this little guy retains all of its big sister's features, including direct solder points and board space for the TBS Nano RX and TBS Unify Pro32 Nano.
Specifications:
- Mounting Holes 20×20
- Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.
- Up to 8S input (max 36V)
- 5V BEC up to 3A continuous
- STM32F722 MCU (Support Betaflight, INav, Emuflight)
- MPU6000 Gyro/ACC for smooth performance
- 128MB Onboard flash
- OSD chip Onboard
- 6 available UARTS
- VTX switch to control the ON/OFF of the VTX
directly from your transmitter (control via Betaflight with USER1 mode) - LC Filter for 5V VTX and Camera
- USB Type C connector
- Onboard RGB LED distribution for clean wiring
to the LED on the arm of the quad. - 8 Onboard RBG LED (compliant with FAI Rules)
- Logic Side and USB current protection
Includes:
1x Zeez F7 2020 Flight Controller
4x Aluminum Standoff
4s Aluminum Nut
1x ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector
1x ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp)
1x JST SH 10 Pin Plastic Housing
2x 2.00mm Header Pin for VTX connection
2x 2.54mm Header Pin for Receiver connection
2x Spare M3 rubber anti-vibration for Flight Controller or ESC
